walraven.com walraven.com
Walraven Wall Mounting Set 62 | H
ISO hdg L = 750 mm and L = 900 mm
Part No. 6901975 (L = 750 mm), 6901990 (L = 900 mm)
and 6901998 (ISO Kit for female thread units)
EN Assembly instruction
DE Montageanleitung
NL Montage-instructie
FR Instructions de montage
ES Instrucciones de montaje
PT Instrução de montagem
PL Instrukcja montażu
CZ Montážní návod
SK Montážny návod
RO Instrucțiuni de montaj
UA Інструкція з монтажу
DK Monteringsvejledning
SE Monteringsanvisninga
NO Montasjeanvisning
IT Istruzioni di montaggio
+44 1295 75 34 00
UK
+49 921 75600
DE
+31 297 23 30 00
NL
+32 16 82 20 40
BE
+420 326 724 009
CZ / SK
+48 12 684 00 95
PL
+33 4 76 04 10 70
FR
+34 93 721 33 75
ES +1 800 610 5056
US
+380 44 351 27 47
UA
+36 1 920 2458
HU
+45 46 37 05 10
DK
+46 40 36 54 20
SE
+45 46 37 05 10
NO
+30 210 6008565
GR
CN +86 21 5176 0268
+65 6970 0605
SG
Other countries
+31 297 23 30 00
Part No. L (mm) Fa,z (kg)
6901975 750 120
Part No. L (mm) Fa,z (kg)
6901990 900 180
4x
4x
4x
4x
4x
4x
4x
4x
2x
2x
2x
2x
2x
2x
2x
2x
2x
2x
4x
4x
Step 3a:
Mount the brackets on the female thread of the unit.
Slide Nuts need to be straight with the bracket.
There are two types of brackets, type 1 with the damper in the middle and type 2
with the damper at the end. Type 1 needs to be positioned on the inner side.
Part no. 6901998 (ISO Kit for female thread units)
Installation
Note: This assembly set is only required for devices
with female thread on the underside to mount the unit
Step 1:
Unscrew the dampers from the standard Wall Mounting Set including slide nuts.
The U-washers, round washers and nuts are not needed, take them off.
Step 2:
Screw the dampers (handtight) on the U-shaped brackets in the open hole by
using the slidenuts.
Step 3b:
Position the unit with the mounted U-shaped brackets on the Wall Mounting Set.
Push the screw down and turn 90° to close the fasteners
(check the right t before tightening; T = 40Nm).
1
2
3a
3b
90°
Type 2Type 1
M8: 25Nm
M10: 40Nm
9660000189 - Assembly Instruction Walraven Wall Mounting Set 62|H ISO hdg L=750mm and L=900mm - 08/2023 - pdf - Full content subject to modications
