WARRIOR 57708 Montageanleitung
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright©2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 21e
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright©2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required f o r a s s e m bly a n d s e r v i ce ma y n o t b e i n c lud e d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Visit our website at: http://www.harborfreight.com
Page 2 For technical questions, please call 1-888-866-5797. Item 57708
Specifications
Type Carbide Grit
Piece Count 9
Saw Sizes 1-1/4″, 2-1/8″, 2-5/8″, 2-7/8″, 3-1/4″
Other Pieces
Carbide Grit File
Backing Plate
Pilot Bit
Blow Molded Case
IMPORTANT SAFETY INFORMATION
The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
1. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during setup and use.
2. Keep away from children.
3. Verify drill’s chuck is in good
condition and fits securely.
4. Do not use excessive pressure
when cutting a hole.
5. Use as intended only;
do not modify tools.
6. Inspect before every use; do not
use if parts are loose or damaged.
7. Use both hands when drilling and
keep saw at 90° to workpiece.
8. Store saws in Case in secure
location away from children.
9. Do not exceed 1500 RPM.
10. Read and adhere to all safety
warnings and operating instructions
of drill used with Set.
SAVE THESE INSTRUCTIONS.
Page 3For technical questions, please call 1-888-866-5797.Item 57708
Setup
TO PREVENT INJURY:
Wear heavy-duty work gloves and
ANSI-approved safety goggles
during setup and whenever
handling the Hole Saws.
1. Find the circular slot in the
Backing Plate that corresponds
to the Hole Saw.
2. Align the three slots in the
Hole Saw with the three rails on the
Backing Plate, and press the Hole Saw
evenly against the Backing Plate,
see step A in illustration.
Note: The Hole Saw will not attach
properly unless it seats evenly
against the Backing Plate.
3. After the Hole Saw is seated against
the Backing Plate, turn it clockwise
(viewed from grit side of Saw) firmly to
lock it in place, see step B in illustration.
4. Turn the Pilot Bit so that the flat on its
shank faces the same direction as the
Bolt on the side of the Backing Plate.
5. Insert the Pilot Bit into the center of
the Backing Plate so that the spade
tip extends through the middle of the
Hole Saw, see step C in illustration.
Note: The Pilot Bit is properly positioned
when its shank extends out the back
of the Backing Plate 1-1/4″– 1-3/8″.
6. Tighten the Bolt on the side of the
Backing Plate to fasten the Pilot Bit,
see step D in illustration.
7. Open Drill’s Chuck (sold separately).
8. Place the Pilot Bit’s Shank
completely into the Chuck and
securely tighten the Chuck.
Backing
Plate
A
C
B
Hole
Saw
Pilot
Bit
D
Operation
1. If possible, place the workpiece
on a piece of scrap wood to
support it while cutting.
2. Holding the drill at 90° to the workpiece,
press the pilot bit tip firmly against the
workpiece where the center is marked.
3. Press the drill’s trigger to turn it on.
4. If the drill is a variable speed type,
cut the workpiece slowly until
a circle groove is made in the
workpiece. Then cut faster.
5. When the hole is cut, release the
trigger and wait for Hole Saw to
come to a complete stop before
removing it from the workpiece.
6. File can be used to refine
or smooth hole.
7. When finished, remove
Hole Saw from drill’s chuck.
8. Remove Hole Saw and Pilot Bit
from Backing Plate.
9. Store inside case, out of
reach of children.
Note: Replacement parts are
not available for this item.
Note: Reference UPC 193175428431.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Inhaltsverzeichnis
Andere WARRIOR Werkzeuge Handbücher
