Watchguard SSL 100 Bedienungsanleitung

WatchGuard® Technologies, Inc.

Quick Start Guide

WatchGuard® SSL 100

• Find the serial number on your device and record it.

• Go to http://www.watchguard.com/activate

• Log in.

NOTE: If you are new to WatchGuard, follow the instructions to create a prole.

• Follow the instructions on the screen.

• It is a good idea to download and extract your WatchGuard SSL

feature key during activation. Extract the feature key on to the

computer you will use to congure your WatchGuard SSL 100.

Connect your WatchGuard SSL 100

• Make sure your computer is congured with a static IP address on the

192.168.111.0/24 network.

NOTE: The default IP address on the WatchGuard SSL 100 is 192.168.111.1.

• Connect the Ethernet interface on your computer to Eth1 on your WatchGuard SSL

device.

Getting Started

• Power on the WatchGuard SSL 100.

Run the Quick Setup Wizard

• Open a web browser and type: https://192.168.111.1:8443. Follow the directions in the

wizard to set up your WatchGuard SSL device.

NOTE: Because the WatchGuard SSL 100 uses a self-signed certicate, you may see a certicate warning in

your browser. It is safe to ignore the warning (Internet Explorer) or to add a certicate exception (Mozilla

Firefox).

• In the wizard, you must decide on the conguration mode that bests suits your

network. These diagrams show the two conguration modes:

Eth 1

green

Single

Interface

Mode

Dual

Interface

Mode

Firewall

DMZ 1

DMZ 2

Eth 0

Eth 1

switchswitch

Trusted Resources

WatchGuard SSL 100

Firewall

DMZ 1

Eth 0

switch

WatchGuard SSL 100

Trusted Resources

Congratulations! You have nished basic network setup of your WatchGuard SSL 100.

You can now put the WatchGuard SSL 100 in your network and use the WatchGuard SSL

Web UI to continue conguration, management, and monitoring tasks.

Next Steps

If you did not upload your feature key in the wizard, you can get your feature key at

https://www.watchguard.com/archive/getcredentials.asp. From the Web UI, go to Monitor

System > Feature Key to upload it.

Download and Install Latest Software

• Go to www.watchguard.com/archive/softwarecenter.asp

• Find and download the latest version of WG SSL OS.

• From the Web UI, go to Manage System > Device Update.

For more information about how to congure your WatchGuard SSL 100, go to

www.watchguard.com/help/documentation and open the current help system.

If you congured your WatchGuard

SSL in Single Interface mode…

• When you put the WatchGuard SSL

in your network, make sure you

connect to Eth0. Eth1 is available

only during the Quick Setup

Wizard.

• Reset the IP address on your

computer.

• To connect to the WatchGuard

SSL Web UI, open a web browser

and type: https://[Eth0 IP

address]:8443

If you congured your WatchGuard

SSL in Dual Interface mode…

• When you put the WatchGuard SSL

in your network, make sure you

connect both Eth0 and Eth1.

• Reset the IP address on your

computer.

• To connect to the WatchGuard

SSL Web UI, open a web browser

and type: https://[Eth1 IP

address]:8443

ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104

WEB: www.watchguard.com • U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895

either trademarks or registered trademarks of WatchGuard Technologies, Inc. in the United States and/

or other countries. All other trademarks and tradenames are the property of their respective owners.

P.N. 352-3035-100 WGPE66377_052709

1.877.232.3531 +1.206.613.0456 www.watchguard.com/support

(U.S. and Canada) (all other countries)

WATCHGUARD TECHNICAL SUPPORT

Inhaltsverzeichnis

Andere Watchguard Firewall Handbücher

Watchguard

Watchguard Firebox M5800 Bedienungsanleitung

Watchguard

Watchguard SOHO Technisches Datenblatt

Watchguard

Watchguard XCS 580 Bedienungsanleitung

Watchguard

Watchguard Firebox V10 Montageanleitung

Watchguard

Watchguard Firebox T40 Bedienungsanleitung

Watchguard

Watchguard Firebox V10 Handbuch

Watchguard

Watchguard XTM 1520-RP Bedienungsanleitung

Watchguard

Watchguard XCS Series Montageanleitung

Watchguard

Watchguard Firebox T40 Montageanleitung

Watchguard

Watchguard Firebox T20 Bedienungsanleitung

Watchguard

Watchguard Firebox T10-D Bedienungsanleitung

Watchguard

Watchguard Firebox T35 Series Montageanleitung

Watchguard

Watchguard QMS 1200 Bedienungsanleitung

Watchguard

Watchguard Firebox V10 Bedienungsanleitung

Watchguard

Watchguard Firebox T70 Bedienungsanleitung

Watchguard

Watchguard Firebox V60 Montage- und Bedienungsanleitung

Watchguard

Watchguard Firebox NV5 Montageanleitung

Watchguard

Watchguard Firebox V10 Bedienungsanleitung

Watchguard

Watchguard Firebox t10 Bedienungsanleitung

Watchguard

Watchguard SOHO Bedienungsanleitung

Watchguard

Watchguard Firebox SOHO 6 Wireless Bedienungsanleitung

Watchguard

Watchguard Firebox M400 Bedienungsanleitung

Watchguard

Watchguard XTM 1050 Bedienungsanleitung

Watchguard

Watchguard Firebox T30 Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung