Watchguard XCS Series Montageanleitung
WatchGuard
®
XCS
Hardware Guide
XCS 1180
ML11AE4
ii WatchGuard® XCS
ADDRESS
505 Fifth Avenue South
Suite 500
Seattle, WA 98104
SUPPORT
www.watchguard.com/support
U.S. and Canada +877.232.3531
All Other Countries +1.206.521.3575
SALES
U.S. and Canada +1.800.734.9905
All Other Countries +1.206.613.0895
ABOUT WATCHGUARD
WatchGuard offers affordable, all-in-one network and content security solutions that
provide defense-in-depth and help meet regulatory compliance requirements. The
WatchGuard XTM line combines firewall, VPN, GAV, IPS, spam blocking and URL
filtering to protect your network from spam, viruses, malware, and intrusions. The new
XCS line offers email and web content security combined with data loss prevention.
WatchGuard extensible solutions scale to offer right-sized security ranging from small
businesses to enterprises with 10,000+ employees. WatchGuard builds simple, reliable,
and robust security appliances featuring fast implementation and comprehensive
management and reporting tools. Enterprises throughout the world rely on our
signature red boxes to maximize security without sacrificing efficiency and
productivity.
For more information, please call 206.613.6600 or visit www.watchguard.com.
Copyright Information
Copyright© 2013 WatchGuard Technologies, Inc. All rights reserved.
WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of
the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies,
Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their
respective owners.
Part Number: 275-4545-001 Rev D
Revised: November 19, 2013
Notice to Users
Information in this guide is subject to change without notice. Updates to this document are posted on the WatchGuard
web site, at http://www.watchguard.com/help/documentation. Companies, names, and data used in examples herein are
fictitious unless otherwise noted. No part of this guide may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of WatchGuard Technologies, Inc.
Complete copyright, trademark, patent, and licensing information can be found in
the WatchGuard product documentation. You can find this document online at:
http://www.watchguard.com/help/documentation/
Hardware Guide 1
Hardware Specifications
The WatchGuard® XCS appliance is an easy-to-use, all-inclusive email and web appliance that provides
security and privacy of inbound and outbound traffic. It is the first product that provides correlated content
security and threat prevention with consolidated administration and reporting across multiple protocols.
The WatchGuard XCS provides content security that enables data loss prevention, encryption and content
filtering with integrated threat prevention for viruses, spam, spyware, phishing, and malware attacks, all in a
secured appliance.
Secure Operating System
The WatchGuard XCS delivers the most complete security available for messaging systems. The appliance runs
on a customized secure operating system that does not allow uncontrolled access to the system. There is no
command line access and the WatchGuard XCS runs as a closed system, preventing accidental or deliberate
misconfiguration by administrators, which is a common cause of security vulnerabilities.
Package Contents
XCS device
Quick Start Guide
Hardware warranty card and LiveSecurity® Service activation card
Power cords
Rail mounting kit
Hardware Specifications
2
About Your Hardware
Hardware Specifications
Caution
The RAID controller backup battery may be discharged during product storage.
We recommend you allow 4 hours to charge the XCS 1180 RAID backup battery after the
system is connected to a power source. During this time the system is functional, but disk
performance is decreased while the battery is charging.
XCS 1180
Processor Intel E3-1275v2 (4 core)
Memory 8GB (2 x 4GB)
ECC DDR3 1600 Dual Channel
Hard Drives 4 x 300GB SAS 15k RPM Hard Drives (RAID 10)
RAID controller with battery backup
Power supply 350W Dual Redundant Power Supply
100-240 VAC, 8.0A MAX, 50/60 Hz, Autosensing
Network
Interfaces
4 port Intel E1G44HT network card
USB Ports 2 x USB ports
I/O Interfaces 1 x VGA DB15
1 x Serial DB9
Dimensions Depth =23” (58.42 cm)
Width (Without rack mount ears) = 17” (43.18 cm)
Width (With rack mount ears) = 19” (48.2 cm)
Height = 3.5” (8.9 cm)
Weight 37 lbs (16.8 kg)
Hardware Guide 3
Hardware Specifications
Environmental Requirements
To safely install your XCS device, we recommend that you:
Install it in a network rack.
Put it in a secure area, such as a locked room, to keep the device from people who do not have
permission to use it.
Connect it to a conditioned power supply to prevent damage from sudden power changes.
Other environmental requirements for the WatchGuard XCS device:
Operating temperature 0 to 40°C (32 to 104°F)
Non-operating temperature –40 to 70°C (–40 to 158°F)
Operating relative humidity 10% to 85% non-condensing
Non-operating relative humidity 5% to 90%
Hardware Specifications
4
Hardware Description
Front View
The front of the XCS device.
This is a close-up of the LED panel.
Power Button
Press the power button to power on and off the device. Before you power off your device, make sure
your operating system is correctly shut down. Hold the power button for at least five seconds to force
a power off.
Power Indicator
The power indicator lights when power is supplied to the device and the device is operational.
Storage Activity
The storage activity indicator flashes when the hard disk drive is active.
On the XCS 1180 device, the individual status lights on each hard drive in the RAID array supersedes
the main storage activity indicator.
Hardware Guide 5
Hardware Specifications
Hard Drive Carriers
Each hard drive carrier has two indicators:
Status: The upper status indicator is green during normal operation. When the status flashes red, this
indicates the drive is rebuilding. When the status is solid red, it indicates a drive failure.
Activity: The lower activity indicator flashes amber to indicate drive activity.
To replace a hard drive carrier:
1. On the front of the device, find the
release tab located on the right side of
the hard drive you want to replace. The
failed drive status indicator will be solid
red.
2. Pull the tab outward to release the
hinged arm on the hard drive.
3. Pull the hard drive out of the slot.
4. On the replacement hard drive, open the
hinged arm.
5. Slide the replacement hard drive into the
slot.
6. Push until the hard drive is flush with the
front of the XCS device. Then close the
hinged arm to lock the drive into place.
Caution
Failure to power off the XCS device, disconnect the power cords from the back of the device
and from the power source, and wait two minutes for power dissipation before performing
the installation of the hard drive, can result in personal injury or death.
Caution
Electro-Static Discharge (ESD) can cause damage to the hard drive. Attach an ESD strap to
your wrist and to a grounded source before you open the device or remove any module.
Wear the ESD strap during the full procedure.
Hardware Specifications
6
Rear View
This is a close-up of the rear of the device.
USB Interfaces
There are two USB interfaces that support additional peripherals, for example. a USB keyboard for use
with the XCS device console.
Serial Port
You can use a DB9 connector for the serial port (COM1) to connect a UPS (Uninterruptible Power
Supply). The serial port can also be used to connect to the serial console if you do not have a monitor
and a keyboard.
VGA Video Interface (Console)
You can use the VGA video connector to connect a monitor and view the XCS device console screen.
AC Receptacles
Accepts a detachable AC power cord supplied with the device.
Power Supply Fans
The fans decrease the internal temperature of the device.
Caution
You must disconnect the power supply before you remove the cover of the XCS device.
If you open the cover without prior authorization from WatchGuard, the Hardware Warranty
is voided.
Hardware Guide 7
Hardware Specifications
Power Supplies
Your XCS device is equipped with dual power supplies. If one of the power supplies fails, the XCS device will
continue normal operation with the remaining power supply.
To replace a power supply:
1. Remove the power cable from the power supply you want to replace.
2. With a cross-head screwdriver, loosen the screws and remove the power supply holding bracket.
Caution
The power supply can be extremely hot when removed. The top of each power supply is a
heat sink and can reach temperatures of 50 - 60 degrees Celsius (122-140 Fahrenheit). Avoid
any contact until the metal has cooled. Do not put the power supply directly on a heat
sensitive surface.
3. Find the power supply release tab located at the top of the power supply. Pull the top metal tab down
and use the bottom tab to pull the power supply out.
4. Slide the replacement power supply into the open slot.
5. Press firmly on the face of the power supply until it clicks into place and is flush with the back of the
XCS device.
6. Replace the holding bracket and tighten the screws.
7. Plug in the power cord. If the replacement is successful, the power indicator light for the new power
supply is green.
Holding bracket screws
Release tab
Hardware Specifications
8
Network Interfaces
This is a close-up of the network interfaces on the rear of the device.
Onboard Network Interfaces
The XCS device has four network interfaces. The network interfaces have standard RJ45 connectors.
Network Interface Indicators
Each network interface has a pair of indicators. The left indicator is the activity indicator for the
interface. The right indicator shows the connection speed for the interface.
Indicator Indicator Color Interface Status
Activity (Left) Not lit No connection
Amber Connection established
Blinks Network activity, data sent and
received
Connection Speed
(Right)
Not lit Operates at 10 Mbps or no link
Green Operates at 100 Mbps
Amber Operates at 1000 Mbps
Andere Handbücher für XCS Series
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Watchguard Firewall Handbücher
Watchguard
Watchguard SOHO Bedienungsanleitung
Watchguard
Watchguard Firebox T35 Bedienungsanleitung
Watchguard
Watchguard XTM 2050 Bedienungsanleitung
Watchguard
Watchguard Firebox M400 Bedienungsanleitung
Watchguard
Watchguard Firebox SOHO 6 Wireless Bedienungsanleitung
Watchguard
Watchguard QMS 1200 Bedienungsanleitung
Watchguard
Watchguard XTM 2520 Bedienungsanleitung
Watchguard
Watchguard Firebox M4800 Bedienungsanleitung
Watchguard
Watchguard Firebox V10 Bedienungsanleitung
Watchguard
Watchguard Firebox M4800 Montageanleitung
Watchguard
Watchguard XTM 1050 Bedienungsanleitung
Watchguard
Watchguard XCS 580 Bedienungsanleitung
Watchguard
Watchguard SOHO Bedienungsanleitung
Watchguard
Watchguard Firebox t10 Bedienungsanleitung
Watchguard
Watchguard Firebox SOHO 6.1 Bedienungsanleitung
Watchguard
Watchguard SSL 100 Bedienungsanleitung
Watchguard
Watchguard Firebox M4600 Montageanleitung
Watchguard
Watchguard Firebox V10 Montageanleitung
Watchguard
Watchguard Firebox t10 Bedienungsanleitung
Watchguard
Watchguard Firebox T80 Bedienungsanleitung
Beliebte Firewall Handbücher anderer Marken
Lanner electronics
Lanner electronics FW-7650 Series Bedienungsanleitung
Swisscom
Swisscom Internet Backup Bedienungsanleitung
SonicWALL
SonicWALL NSa 5700 Bedienungsanleitung
DPtech
DPtech FW1000 SERIES Bedienungsanleitung
FEITIAN
FEITIAN MultiPass FIDO Bedienungsanleitung
EBLOCKER
EBLOCKER PRO Bedienungsanleitung