Watchguard DVR4EONPACK Bedienungsanleitung

FOR MODELS: DVR4EONPACK & DVR8EONPACK

Professional Surveillance Pack

Digital Video Recorder with Security Cameras

‘QUICK INSTALLATION GUIDE’

DVR 15m IR Day/Night Cameras

-H.264 Video Compression Technology - High Quality Image sensor

-Multiplex Operation - 26 x IR LEDs

-Long Recording Duration - 420 TVL Resolution

-Intelligent Video Motion Detection Recording

-Remote Network Surveillance & Backup Functions

-Easy to operate with remote or USB mouse

-System Auto recovery after power loss (blackout)

N517

www.watchguardalarms.com.au

DVR4EONPACK Package Contents

(Before commencing installation, please ensure you have all the parts listed below.)

1 x 4ch Digital Video Recorder with 1TB Hard Disk Drive

● Advanced H.264 Video Compression Technology for High Quality Images and Small

File Sizes

● Easy to Operate - Just Like a VCR

● Can be Connected to a PC Network for Remote Viewing & Backup (Software on CD)

● For More Details, Please See Bottom of this Box

4 x Day/Night Weatherproof Colour Cameras with Infrared LEDs - 15m Range

● High Quality Image Sensor

● IR LEDs for Viewing in Total Darkness up to 15m (B/W Mode)

● 420 TVL Resolution

● Compact Size Ideal for Use Indoors or Out

1 x IR Remote Control

● Allows You to control the DVR like a Television.

1 x USB Mouse

● Allows You to control the DVR like a PC.

4 x Camera Connection Cables

● Combined DC Power and Video Leads

● Pre-terminated - Allowing Simple Plug-in Connection – No Tools Required

● 4 x 18m Leads Supplied

1 x Power Split Cable

● Allows You to Connect All 4 Cameras and the DVR to 1 Power Supply

1 x Switch Mode Low Voltage Power Supplies

● 1 x 12VDC Supply for Use with the Power Split Cable to Power All Cameras

* Note: If you wish to connect directly from the DVR to a PC you require a crossover cable (Not Included)

DVR8EONPACK Package Contents

(Before commencing installation, please ensure you have all the parts listed below.)

1 x 8ch Digital Video Recorder with 1TB Hard Disk Drive

● Advanced H.264 Video Compression Technology for High Quality Images and Small

File Sizes

● Easy to Operate - Just Like a VCR

● Can be Connected to a PC Network for Remote Viewing & Backup (Software on CD)

● For More Details, Please See Bottom of this Box

8 x Day/Night Weatherproof Colour Cameras with Infrared LEDs - 15m Range

● High Quality Image Sensor

● IR LEDs for Viewing in Total Darkness up to 15m (B/W Mode)

● 420 TVL Resolution

● Compact Size Ideal for Use Indoors or Out

1 x IR Remote Control

● Allows You to control the DVR like a Television.

1 x USB Mouse

● Allows You to control the DVR like a PC.

8 x Camera Connection Cables

● Combined DC Power and Video Leads

● Pre-terminated - Allowing Simple Plug-in Connection – No Tools Required

● 4 x 18m Leads Supplied

1 x Power Split Cable

● Allows You to Connect All 8 Cameras to a Power Supply

2 x Switch Mode Low Voltage Power Supplies

● 2 x 12VDC Supply for Use with the Power Split Cable to Power All Cameras

* Note: If you wish to connect directly from the DVR to a PC you require a crossover cable (Not Included)

DVR4EONPACK Installation

Before installing this unit, please read through the following points:

•Do not place cords from the AC adapter where they can be pinched or stepped on.

•Do not place heavy objects on cords, or cover cords with rugs or carpet.

•Never immerse any component in water, and do not spray cleaners of solvents on the unit. Unplug

units before cleaning. When cleaning, use a damp, lint-free cloth only.

•Do not expose the DVR or Cameras to excessive heat, cold, or moisture

•Leave at least a 50mm between the DVR and other objects for air circulation around the unit.

•Service should be handled by qualified technicians.

Connection Guide

1. Locate the 4 Cameras as required and connect the supplied combination DC Power and Video

leads.

2. Connect the 4 x corresponding camera Video leads into the camera inputs at the rear of the DVR

(Figure A). Be sure to take note of the Camera input 1 – 4, as this will determine the camera

channels.

3. Connect the 4 x camera Power leads into the Power Splitter Cable

4. Connect the other Power Supply Cable to the DVR (Figure D).

5. If you are using a TV/Monitor with Composite Video Input, follow Step 6.

If you are using a TV/Monitor with VGAinput, follow Step 7.

6. Connect the Monitor Connection Cable into the Composite Monitor output on the rear of the DVR

(Figure B). Connect the Monitor Connection Cable into the RCA Video input on your TV/Monitor

(TV/Monitor Not Supplied).

7. Connect the VGA cable to the VGA output on the rear of the DVR (Figure C). Connect the other end

of the VGA cable into the TV/Monitor VGA input.

8. Connect the 12VDC Power adaptor to the Power Split Cable.

9. Plug the Power adaptor into a Power-Point and switch the power-point ON

10. The Power LED on the front of the DVR should now be illuminated and the unit will make a loud

beep sound to show that it is ready.

Figure B

Figure C

Network cable connection (Optional Use)

Figure A

Figure D

DVR8EONPACK Installation

Before installing this unit, please read through the following points:

•Do not place cords from the AC adapter where they can be pinched or stepped on.

•Do not place heavy objects on cords, or cover cords with rugs or carpet.

•Never immerse any component in water, and do not spray cleaners of solvents on the unit. Unplug

units before cleaning. When cleaning, use a damp, lint-free cloth only.

•Do not expose the DVR or Cameras to excessive heat, cold, or moisture

•Leave at least a 50mm between the DVR and other objects for air circulation around the unit.

•Service should be handled only by qualified technicians.

Connection Guide

11. Locate the 8 Cameras as required and connect the supplied combination DC Power and Video

leads.

12. Connect the 8 x corresponding camera Video leads into the camera inputs at the rear of the DVR

(Figure A). Be sure to take note of the Camera input 1 – 8, as this will determine the camera

channels.

13. Connect the 8 x camera Power leads into the Power Splitter Cable

14. Connect the other Power Supply Cable to the DVR (Figure D).

15. If you are using a TV/Monitor with Composite Video Input, follow Step 6.

If you are using a TV/Monitor with VGAinput, follow Step 7.

16. Connect the Monitor Connection Cable into the Composite Monitor output on the rear of the DVR

(Figure B). Connect the Monitor Connection Cable into the RCA Video input on your TV/Monitor

(TV/Monitor Not Supplied).

17. Connect the VGA cable to the VGA output on the rear of the DVR (Figure C). Connect the other end

of the VGA cable into the TV/Monitor VGA input.

18. Connect the 12VDC Power adaptor to the Power Split Cable.

19. Plug the Power adaptor into a Power-Point and switch the power-point ON

20. The Power LED on the front of the DVR should now be illuminated and the unit will make a loud

beep sound to show that it is ready.

Figure B

Figure C

Network cable connection (Optional Use)

Figure D

Figure A

Quick Start up Guide

•Make sure your TV/Monitor is ON and set to the appropriate AV channel if required

•The Power LED will illuminate Green. It takes approximately 10 to 15 seconds to boot the

system.

•The images from all cameras should now be displayed on your TV/Monitor

•BEFORE BEGINNING TO RECORD YOU MUST SET the DATE and TIME on your DVR.

Setting the Date and Time

•Press “MENU” on the DVR front panel to bring up the dialogue box. Use the mouse or remote to

enter the DVR login, with the on-screen keypad.

The default Device ID is 000000, the default password is to be left blank.

(Users can alter the password later. Please refer to the Advanced set up guide CD)

•Press “MENU” on the DVR front panel to bring up the main menu. Select “SETUP” “TIME

SETUP” to set the date and time

IMPORTANT NOTE: Please DO NOT change the date or time on your DVR after the recording function is

activated. The recorded data will be disordered and you will not be able to find the recorded file to backup by time

search.

NOTE: If users change the date or time accidentally when the recording function is activated, it’s recommended to

clear all HDD data, and start recording again.

Menu Display and Operation with USB Mouse

The system supports operation via USB mouse. See below for an explanation of how to operate your

DVR using the mouse input.

Connect USB Mouse

-Connect your USB mouse to one of the USB ports on the DVR front panel

- Use the mouse to enter the DVR password with the password keypad.

- Default Device is 000000, the default password is to be left blank.

Mouse action Function

Right button Enter system main menu: real-time screen preview, single mouse left click

Double mouse

left click

Single left click the functional menu icon, and enter menu setting page

The image in a channel can be enlarged by double click real-time monitoring and playback screen, it

can be recovered into monitoring and multi-split image after double click again

Click the left

mouse button

Access to volume adjustment, color adjustment and PTZ control menu. The volume adjustment, color

adjustment and PTZ control can set only one channel, please select corresponding screen if

multi-screen mode is on prior to setting.

If you single click mouse button in volume adjustment and PTZ control:

PTZ control is available if clicking direction or "+ and -" icon;

There is a volume bar in volume control interface. Move mouse to a position and click right button, the

corresponding volume will be shown in the right side of the volume bar, click "X" to exit;

The operations like color adjustment can be referred to above volume adjustment.

If there are many options in the option box, click the left button and drop-down menu will be shown.

Fast forward and fast backward function can be realized by left clicking in video playback interface.

Click the left button or right button can activate the soft keyboard in input box, clicking right button can

switch English and Chinese input state; the number, symbol and English word capitalization can be

realized only by clicking.

The Chinese spell is also available via the soft keyboard input when Chinese input, its input method is

as same as remote control; left button can be used for turning page.

Mouse

movement

Click left button and move can adjust the parameters in volume adjustment and color adjustment

interface, there is corresponding parameter display in right side when movement.

Click left button and move the motion box can set the dynamic detection zone in motion detection

zone.

Recording mode

Enter the Recording Mode screen from “Main Menu”>“Record”, as shown below:

CHANNEL: used to select if the video recording function is enabled for the corresponding recording

channel.

RESOLUTION: available in the 3 levels of D1（704*576）, HD1（704*288）and CIF（352*288）(Note: This

option is available for 4-channel DVR only, and the resolution of 8-channel DVR is CIF by default.)

QUALITY: 3 levels available are high, normal and low, which correspond to the 3 data stream standards

of high, normal and low bit rates.

REC.MODE: there are two available modes recording. These are “When powered up” and “By Time”.

When powered up: The DVR will record when powered on.

By Time: The DVR will record as per its schedule. When “timing recording” is selected, the “Record

Time Configuration” button will appear on the right. Move the cursor here and press “Enter” to enter

the Record Time Configuration screen, as shown below:

Channel: You may choose either “All” or a single channel.

Time configuration: First select from the 3 modes of alarm recording, general recording and no

recording for your desired recording mode for a certain lattice, and configure specific recording time

lattices (each lattice represents 1hr). Each lattice can be configured into different recording modes

by marking them into different colors, such as red, green and background color, which represent

alarm recording, general recording or no recording within each hour respectively.

FILE LENGTH: Left-click or press “Enter” to select the File length, with the 4 options of 15min, 30min,

45min and 60min.

Video search

Press “MENU” on the DVR front panel to bring up the main menu. Select “PLAYBACK” to as shown

below.

To playback, first select the corresponding camera channel then choose the DATE and click “SEARCH”.

Next select the TIME and press “PLAY”. This will begin playing the selected time.

Alternatively you can select the corresponding camera channel then choose the DATE and click

“SEARCH” to view the record state of this date, as shown below:

Month: displaying the record information of every day in the current month. A green block indicates

normal recording, a red block indicates alarm recording, and the background color indicates no

recording. Click a date on this bar to search the record information of every hour of that day. The

search results will be visualized in the “Day” bar below.

Date: displaying the recording hours of the current day. Each lattice represents 1hr, and one recording

segment is 0.5hr. The presentation of the record state is the same as above. Click a 0.5hr segment of a

day directly to enter the record playback of this segment.

Backup

While in the “PLAYBACK” menu, select the corresponding camera channel then choose the DATE and

click SEARCH. Next select the TIME and then select “File List” for the backup operation.

The record file may be backed up by a USB storage device. Before the record file is backed up, the user

must insert the storage device into the USB slot of this unit. This product supports the plug-and-play

operation of USB devices.

Move the cursor up and down in the Detailed File List screen to select a certain record file. After “Enter”

is pressed in the “Backup” check box, a “√” will appear in this box, indicating that this record file has

been selected. The move the cursor to the option box on the right and click “Backup”, when the screen

will display the backup progress message of the file, as shown below:

Note:

When the available space of the backup device is less than the capacity of the recorded file, the

system will prompt the user with “Not Enough Space”

After the recorded files have been backed up, you can unplug the USB device.

Andere Handbücher für DVR4EONPACK

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Watchguard Sicherheitssystem Handbücher

Watchguard

Watchguard DVR8E(PACK) Bedienungsanleitung

Watchguard

Watchguard WGSMSC Bedienungsanleitung

Watchguard

Watchguard WGAP864 Bedienungsanleitung

Watchguard

Watchguard DVR4ENTPACK7 Bedienungsanleitung

Watchguard

Watchguard Firebox T35-R Montageanleitung

Watchguard

Watchguard SMS 2010 WGSMS2010 Bedienungsanleitung

Watchguard

Watchguard WGWMSA Bedienungsanleitung

Watchguard

Watchguard DVR4EONPACK Bedienungsanleitung

Watchguard

Watchguard DVR8ENTPACK4 Bedienungsanleitung

Watchguard

Watchguard DVR4E(PACK) Bedienungsanleitung

Watchguard

Watchguard DVR4ENTPACK4 Bedienungsanleitung

Watchguard

Watchguard ALL-SIR2 Bedienungsanleitung

Watchguard

Watchguard WGSIR-900 Bedienungsanleitung

Watchguard

Watchguard DVR4ENTPACK3 Bedienungsanleitung

Watchguard

Watchguard NVR4ENTPACK v1.2 Bedienungsanleitung

Watchguard

Watchguard CVRxE Bedienungsanleitung

Watchguard

Watchguard WGSIR-500W Bedienungsanleitung

Watchguard

Watchguard WGAP864 Bedienungsanleitung

Watchguard

Watchguard DVR4ENTPACK Bedienungsanleitung

Watchguard

Watchguard WGSENTINEL Bedienungsanleitung

Watchguard

Watchguard 2BWIR Bedienungsanleitung

Watchguard

Watchguard Firebox T15 Montageanleitung

Watchguard

Watchguard WGAP864SMS Service-Handbuch

Watchguard

Watchguard DVR8ENTPACK3 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung