Waters Network Systems PSL1008-MSC Bedienungsanleitung
12
OPERATING MANUAL
PSL1008 and ES1008 Switch
Switch with Eight 10/100Base-TX Ports
Plus One Fiber 100Base-FX Port
PSL1008-TX
PSL1008-MSC
PSL1008-MST
PSL1008-MTRJ
PSL1008-SSC-30
ES1008-TX
ES1008-MSC
ES1008-MST
ES1008-MTRJ
ES1008-SSC-30
CORPORATE HEADQUATERS MANUFACTURING/CUSTOMER SERVICE
5001 American Blvd. W., Suite 605 945 37th Avenue, NW
Bloomington, MN 55437 Rochester, MN 55901
Phone: 800.441.5319 Phone: 800.328.2275
Phone: 952.831.5603 Phone: 507.252.1951
Fax: 952.831.5605 Fax: 507.285.1952
Web site: http://www.watersnet.com
Waters Network Systems User’s Manual Page 2
PSX/ES1008 Models
Table of Contents
1.0 Specifications .........................................................................................3
2.0 Package Contents ..................................................................................5
3.0 Introduction ............................................................................................5
3.1 Hardware Features................................................................................... 6
3.2 Hardware Description............................................................................... 7
3.3 LED Indicators.......................................................................................... 7
3.4 Desktop Installation .................................................................................. 8
3.41 Attaching Rubber Feet ............................................................................. 8
3.42 Power On ................................................................................................. 9
4.0 Network Applications............................................................................. 9
4.1 DIP-Switch Setup ................................................................................... 10
5.0 Troubleshooting ...................................................................................12
6.1 Before Calling for Assistance ................................................................. 12
5.2 Return Material Authorization (RMA) Procedure .................................... 13
5.3 Shipping and Packaging Information...................................................... 14
6.0 Warranty................................................................................................15
Waters Network Systems User’s Manual Page 3
PSX/ES1008 Models
1.0 Specifications
OPERATIONAL CHARACTERISTICS:
MAC Address Table: 2k
Switching Mode: Store-and-forward
Memory Buffer Size: 768kb
Performance: Non-blocking wire speed
Dip switch for full and half duplex setting
Dip switch for VLAN setting on fiber models
NETWORK STANDARDS:
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3 (N-way auto negotiation)
EMI/SAFETY COMPLIANCE:
FCC Class A, CE, UL cUL
NETWORK CABLE CONNECTORS
RJ45 shielded female ports
10/100Mbps: CAT5 UTP or better
Multimode: SC
POWER SUPPLY:
Input Voltage
110 to 240 VAC, 50 to 60Hz
Power Consumption
7.5 watts maximum
OPERATING ENVIRONMENT:
Ambient Temperature:
32° to 113°F (0° to 45°C)
Storage:
-40° to 158°F (-40°to 70°C)
Ambient relative humidity:
10% to 90% (non-condensing)
Waters Network Systems User’s Manual Page 4
PSX/ES1008 Models
MECHANICAL:
Enclosure:
Rugged high-strength sheet metal suitable for stand-alone, wall or tabletop
mounting
Cooling Method: Convection cooled
PHYSICAL CHARACTERISTICS:
PSL1008 Dimensions:
9.75 x 5.25 x 1.5 in (165 x 92 x 25mm)
Weight:
2 lb (.91kg)
ES1008 Dimensions:
16 x 11 x 1.75 in (406 x 279 x 37.5mm)
Weight:
3.7 lb (1.68kg)
Waters Network Systems User’s Manual Page 5
PSX/ES1008 Models
2.0 Package Contents
Examine the shipping container for obvious damage prior to installing this product.
Notify the carrier of any damage that you believe occurred during shipment. Ensure
that the items listed below are included. If an item is missing, please contact your
supplier.
The 1008 switch package contains the following:
1008 Switch
Power Cord
Four Rubber Feet
User’s Guide
3.0 Introduction
In our modern society, communication and sharing information is essential to our lives.
Computer networks have proven to be one of the fastest methods of communication.
The 1008 series of switches are compact desktop switches that are the ideal solution
for any network user. The 1008 series of switches provide high-performance switching
functions with low-cost connectivity. The 1008 switches feature store-and-forward
switching and will auto-learn and store source addresses with a 2K-entry MAC
address table.
Figure 3-1. PSL-1008-MSC
The base model 1008 switch provides 8 10/100Base-TX RJ45 ports while the 9-port
models offer an optional 100Base-FX fiber port with SC, ST or MRRJ connectors.
An additional model is offered with a 30km singlemode fiber port. The switch will
automatically detect the speed of connected devices to accommodate both 10 and
100Mbps. The 10Mbps bandwidth will accommodate 10Mbps workgroup switches
Waters Network Systems User’s Manual Page 6
PSX/ES1008 Models
while simultaneously providing the 100Mbps bandwidth required for multimedia
applications. All RJ45 ports support Auto MDI/MDIX.
Ethernet switching technology dramatically boosted the total bandwidth of a network,
eliminated congestion problems inherent with the carrier sense multiple access with
the collision detection (CSMA/CD) protocol and greatly reduced unnecessary
transmissions.
This revolutionized networking. First, by allowing two-way, simultaneous
transmissions over the same port (full-duplex), bandwidth was essentially doubled.
Second, by reducing the collision domain to a single switch-port, the need for carrier
sensing was eliminated. Third, by using the store-and-forward technology’s approach
of inspecting each packet to intercept corrupt or redundant data, switching eliminated
unnecessary transmissions that slow down network traffic.
Auto-negotiation regulates the speed and duplex of each port, based on the capability
of both devices. Flow-control allows transmission from a 100Mbps node to a
10Mbps node without loss of data. Auto-negotiation and flow-control may have to be
disabled for some networking operations that involve legacy equipment. Disabling the
auto-negotiation is accomplished by hard setting the speed or duplex mode of a port.
3.1 Hardware Features
Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet Standards
Auto-sensing 10/100Base-TX RJ45 port ports
Automatic MDI/MDIX crossover for each 10/100Base-TX port
Nine-port model includes one fixed 100Base-FX port (SC, ST or MTRJ
connector)
Dip switch for full and half duplex mode
Dip switch for VLAN setting
Store-and-forward switching architecture
Automatic address learning, address migration
2K-entry MAC address table
768kb memory buffer sharing
Performs non-blocking full wire speed
Waters Network Systems User’s Manual Page 7
PSX/ES1008 Models
3.2 Hardware Description
Front Panel
The Front Panel of the fiber 1008 switch consists of 8 auto-sensing 10/100Mbps RJ45
ports and one 100-BaseFX fiber. The LED indicators are also located on the front
panel of the switch.
Figure 3-2 PSX-1008-MSC Switch
The front panel is displayed as below.
Figure 3-3. Front Panel of the PSX-1008-MSC Switch
Rear Panel
A three-pronged AC power plug is located on the rear panel of the switch. The 1008
switches work in the range 100-240V AC, 50-60Hz.
Hardware Ports
Eight 10/100 auto MDI/MDIX 10/100Base-TX connections. MDI allows
you to connect to another hub or switch and MDIX allows you to connect
to a workstation or PC. Therefore, Auto MDI/MDIX means that you can
connect to another switch or workstation without a crossover cable.
Fiber model provides one 100Base-FX port (SC, ST or MTRJ connector)
3.3 LED Indicators
There are two LED-Indicators (LNK/ACT and FDX/COL) for each of the eight
10/100Base-TX copper ports. The following table provides the status and description
of the LEDs. The LEDs provide a real-time indication of systematic operation status.
Waters Network Systems User’s Manual Page 8
PSX/ES1008 Models
The following table describes the function of the LED indicators:
Ethernet Port
LED Satus Color Description
Power On Green Power On
On Green The port is connecting with the device
Blinks Green The port is receiving or transmitting
data.
LNK/
ACT
Off . No device attached
On Orange
The port is operating in full-duplex
mode.
Blinks Orange Collision of packets occurs in the port.
FDX/
COL
Off No device attached or in half-duplex
mode.
Table 3-1. LED Description
3.4 Desktop Installation
Choose a surface for your switch that is clean, smooth, level, sturdy and with a power
outlet nearby. Make sure there is enough clearance around the switch to allow
attachment of cables, power cord and air circulation.
3.41 Attaching Rubber Feet
1. Make sure mounting surface on the bottom of the switch is free of grease and
dust.
2. Remove adhesive backing from the rubber feet.
3. Apply the rubber feet to each corner on the bottom of the switch.
Figure 3-5. Attaching Rubber Feet to each corner on the bottom of the Switch
Waters Network Systems User’s Manual Page 9
PSX/ES1008 Models
3.42 Power On
Connect the power cord to the AC power socket on the rear panel of the switch.
Check the power indicator on the front panel to see if power is properly supplied.
4.0 Network Applications
This section provides samples of network topology in which the 1008 switch can be
used. The 1008 series of switches are generally used as a desktop, workgroup or
edge segment switch.
Desktop Application
The 1008 series of switches provide the ideal solution for small workgroups. The
switch can be used as a standalone switch to which personal computers, servers, and
print servers are directly connected to form a small workgroup.
Figure 4.1 Desktop Application
Waters Network Systems User’s Manual Page 10
PSX/ES1008 Models
4.1 DIP-Switch Setup
The DIP-switch is used to configure the modes for VLAN and duplex modes. DIP
switch settings are described in the following table.
No. Function Description
ON: Enable the VLAN function on each port1 VLAN
OFF: Disable the VLAN function on each port
HDX: Half Duplex2 Fiber Port Full/Half Duplex
FDX: Full Duplex
Table 4-1
Figure 4-1 DIP Switch
DIP
-
switch
LEDs
Dieses Handbuch passt für folgende Modelle
9
Inhaltsverzeichnis
Andere Waters Network Systems Schalten Handbücher
Waters Network Systems
Waters Network Systems GSM 2124 Bedienungsanleitung
Waters Network Systems
Waters Network Systems ProSwitch-Quad Series Bedienungsanleitung
Waters Network Systems
Waters Network Systems ProSwitch Lite Bedienungsanleitung
Waters Network Systems
Waters Network Systems GS1016 Bedienungsanleitung
Waters Network Systems
Waters Network Systems PSX1008-GTX Bedienungsanleitung
Waters Network Systems
Waters Network Systems GSM2109-1009-8PoE Bedienungsanleitung
Waters Network Systems
Waters Network Systems ProSwitch FlexPort- 2600M Bedienungsanleitung
Waters Network Systems
Waters Network Systems ProSwitch 2800M Bedienungsanleitung
Waters Network Systems
Waters Network Systems ProSwitch FlexPort- 2600M Bedienungsanleitung
Waters Network Systems
Waters Network Systems GS1008 Bedienungsanleitung
Waters Network Systems
Waters Network Systems MS1008-2G-4POE Bedienungsanleitung
Waters Network Systems
Waters Network Systems EN-FUTP-8 Bedienungsanleitung
Waters Network Systems
Waters Network Systems PS-2126M-POE Bedienungsanleitung
Waters Network Systems
Waters Network Systems ProSwitch-Secure 1007 Bedienungsanleitung
Waters Network Systems
Waters Network Systems PSX1008-TX Bedienungsanleitung
Waters Network Systems
Waters Network Systems GSM2109 Bedienungsanleitung
Waters Network Systems
Waters Network Systems GSM2108 Bedienungsanleitung
