Watlaa One Bedienungsanleitung

Full User Manual –Watlaa One

DISCLAIMER

Watlaa One is a research tool and shall be treated as such. Caution shall be exercised

by anyone using it. Watlaa One IS NOT A MEDICAL DEVICE.

Watlaa Limited does not assume any responsibility, or will be liable, for any damage

arising from the use of their products.

Copyright © Watlaa Limited 
Table of Contents 
 
1Opening the box....................................................................................................... 4 
2Charging .................................................................................................................. 4 
3Connecting with miaomiao bridge ............................................................................ 4 
3.1 When changing to new libre sensor (every 2 weeks) .....................................................5 
4Dimension and parameters of the watch .................................................................. 5 
5Navigation ............................................................................................................... 6 
6Menu structure of Watlaa One ................................................................................. 7 
7Calibration ............................................................................................................... 8 
8Setting time and date............................................................................................... 9 
9Watchface................................................................................................................ 9 
10 Hard reset ...........................................................................................................10 
11 Bridge connection................................................................................................10 
11.1 Reconnection............................................................................................................. 10 
12 Alarms ................................................................................................................11 
12.1 Alarm behaviour ........................................................................................................11 
12.2 Bridge connection alarm ............................................................................................12 
12.3 Low and high glucose alarm snooze............................................................................ 12 
12.4 Alarm sound .............................................................................................................. 12 
13 Data storage .......................................................................................................12 
 
 

1Opening the box

Inside the box you will find the following items:

-Watlaa One watch

-Metal strap

-Loop strap

-2 USB charging cables

2Charging

Remember to charge your watch before taking into use. The battery icon will

indicate if the battery is charging. Please charge until lightning icon inside battery

turns off. That means that the battery is fully charged.

When the battery shows 100%, charge still for approximately 10-15 minutes in order

to the most out of the battery. Lightning icon will disappear when fully charged.

3Connecting with miaomiao bridge

Please wear Watlaa One on the same arm as where you have your miaomiao. The

low energy connection may disconnect if wearing on the other arm.

Before connecting Watlaa One to miaomiao, please reset your miaomiao bridge

according to instructions from supplier. Fasten bridge on top of the libre sensor.

After this go to Watlaa One watch. Navigate in the following way:

1. Short taps until you reach “CGM”-menu

2. Long press to enter “CGM”-menu

3. Short tap one (1) time until you see “Bridge”

4. Long press →under “Bridge” it should say “search” for a few seconds

5. After this it should display “miaomiao” or “miaomiao2” under “Bridge”

6. Done. Watlaa One will do the rest. Remember to calibrate

If you have used miaomiao with a mobile phone before using Watlaa One,

remember to turn your phone’s bluetooth off, otherwise the phone will try to

establish connection to your miaomiao, and this can make Watlaa One disconnect.

3.1 When changing to new libre sensor (every 2 weeks)

Disconnecting the miaomiao and connecting again will instruct Watlaa One that you

might have changed libre sensor. When you change the libre sensor you need to do

the following:

1. Disconnect from miaomiao by doing exactly the same steps as in previous

chapter. Instead of connecting, you will now disconnect Watlaa One from

miaomiao

2. After applying miaomiao to a new libre sensor follow steps 1-6 in previous

chapter again. Remember to calibrate

4Dimension and parameters of the watch

Below you can find the dimensions of the watch.

5Navigation

You can navigate the menu by short tap and long press.

Short tap –when tapping the bottom of the screen (touch panel) you will enter the

menu. Short tap will either bring you forward in the menu or increase a selection.

For instance, selecting minutes when setting time.

Long press –will enter desired menu item. Long press also confirms selections. For

instance, when setting time and date.

6Menu structure of Watlaa One

7Calibration

Watlaa One supports calibrations in 2 ways:

1. Enter calibration points based on medical device or finger prick

a. If you toggle past the value you want by mistake, in order to erase simply

don’t confirm via long press. Wait for 5 seconds and you will be taken

back to main screen without saving.

b. If you save a wrong value the only option is to erase calibrations.

Remember this will then erase all calibrations

2. Enter slope and intercept form 3rd party application (we will soon have

integrations with different applications ready and then slope and intercept can

be synced from those apps also automatically)

The calibration algorithm will use calibration points from last 4 days. In case only

older calibration points than 4 days, then those will be used. A maximum of 20

calibration points can be used.

NOTE: Calibration is the most important part for getting accurate readings on your

Watlaa One. If you are not familiar with the concept, please ask a friend, ask on a

facebook group, or read the article here.

https://bionicwookiee.com/2018/11/15/cgm-accuracy-calibration-is-king/

The glucose readings will only be as accurate as your calibrations.

Calibration reminders will be displayed every 24h. User can decide to dismiss or

enter calibration from the reminder.

8Setting time and date

You can change date and time in the Settings menu. Alternatively, you can download

the Watlaa application (android only) from Google play here. After connecting the

application to the watch, the time and date will be set automatically to the same as

the setting on your phone.

Watlaa One’s communication protocol supports time & date update so in the future,

also other applications will update the time & date automatically to Watlaa One.

Use short taps to select hour, minute, year, month, date, and then confirm with long

tap in between each parameter. Remember to confirm with long tap after setting

last parameter, otherwise selections will not be saved.

For now, maximum year is set to 2050, so if you toggle too far either don’t confirm

or tap more to come back around.

9Watchface

We have currently implemented 3 different watchfaces. An illustration of them can

be found below.

The symbols on the watchface is illustrated here:

The red line has the same value as High glucose alarm value. This can be modified in

the “CGM” menu. The blue line is Low glucose alarm value.

10 Hard reset

Hard reset will erase the memory of the watch. Use this when changing sensor and

you want to start fresh.

11 Bridge connection

When pressing this menu with long press the watch will search for CGM bridges it

can connect to. At the moment we support miaomiao 1 and 2. Bubble, droplet, and

blucon will be added later.

11.1 Reconnection

If the bluetooth connection is lost, the Watlaa One will try to reconnect for

approximately 3 hours. When loosing connection, the interval of reconnection

attempts follows this schedule:

Inhaltsverzeichnis

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung