Webb WER21HW Installations- und Betriebshandbuch

Please read & understand this manual, paying particular attention to the safety instructions, before use.

Operator’s Manual & Parts List

08 Dec 2015

193805003

53cm High Wheeled

Self Propelled Lawnmower

WER21HW

Contents

Box Contents

Product Diagram

Assembly Guidelines

Before you begin / Starng the engine

Using your mower / Safety ps

Basic Maintenance

Technical Speciﬁcaon

Declaraon of Conformity

Parts List & Diagrams

Warranty

For Spares or Support of your Webb product, please contact us:

Tel: 01793 333212

(Mon – Fri 8.30am to 5.00pm)

Email: [email protected]

To view the full range or ﬁnd out more informaon go to

www.webblawnmowers.co.uk

Please read& understand this manual, paying particular attention to the safety instructions, before use.

Operator’s Manual & Parts List

07 Dec 2015

193801003

46cm Steel Deck

High Wheel

Self Propelled Lawnmower

WER18HW

×1

×2

×4

1. Petrol Engine Mower

4. Rear Grass Catcher

2. Instruction Manual

5. Mulch Plug

3. Quick Release Handles

6. Bolt and Nut Assembly

What you get with your mower

INSTRUCTION MANUAL

10.

BOX CONTENTS / PRODUCT DIAGRAM

Brake (OPC) Lever

Drive Lever

Oil Filter & Dipstick

Exhaust

Spark Plug

Air Filter

Fuel Tank Cap

Side Discharge

Height Adjustment Lever

Grass Collection Bag

Remove and ensure you have all the parts

required for assembly (see page 2 for reference)

Parts required:

4 x Bolts

1. LOWER HANDLEBAR ASSEMBLY

3. ATTACHING THE SAFETY (OPC) CABLE

2. Upper Handle Bar Assembly

Spring cord Guide and bolt.

3a 3b

3. Aaching the Transmission Cable

and bolt.

3a. Pull the brake lever out of the right

side hole, tilt forward and lower towards

the mower.

3b. Insert the end of the cable into the

hole in the lever and replace the lever

back into hole of the handle.

6. LOCATE THE STARTER CORD

The starter cord spring maybe located differently depending on the model

1. Lower Handle Bar Assembly

attach lower handle bar bolts.

take the weight of the handle

INSTRUCTION MANUAL

2. UPPER HANDLE BAR ASSEMBLY

4. ATTACHING THE DRIVE CABLE

5. FIT THE CABLE CLIPS

2a 2b

7a 7b

4. Aaching the Drive Cable

4a. Pull the drive lever out of the

left side hole and lower

towards the mower.

4b.

the mower handle

5. Fit the Cable Clips

Push the cable clips into place.

Parts required:

2 x Quick Release Handle Assemblies

6. Locate the Starter Cord

Pull the stater cord upto the

spring. holding the cord at the

lower side of the spring rotate

the string clockwise around

the spring.

7. Aach the Grass Catcher

7a.

with one hand.

7b. Lower the Grass catcher

hooks onto bar, left and right.

4a 4b 5

The mower is supplied without oil in the

engine. Refer to the B&S engine manual

before starting the engine for the first time.

Firstly, remove the warning label

from under the dipstick, then

remove the dipstick and slowly

pour SAE30 or 10W/30

lawnmower grade engine oil int

the engine via the oil filler (as directed by

thr B&S engine manual).

Replace the dipstick and tighten.

Before you use the mower each

time, check the oil level (fig. 2) and

if necessary top up with SAE30

or 10W/30 oil. To check the oil level,

unscrew the yellow dipstick, wipe

with a rag and replace into the oil

filler (do not screw back in place),

remove the dipstick again and

check the level.

The oil level must be between the

min and max marks on the dipsick

(fig.3). Replace the dipstick and

screw into place.

Petrol is highly flammable so

extreme caution must be taken when

handling it. Always store petrol in

approved containers and you must

ensure that you use fresh petrol that it

less than 4-6 weeks old. Do not mix oil

with petrol.

To put petrol in the fuel tank, firstly

remove the warning label form

under the petrol cap. It’s best to fill

the tank using a clean funnel, but

never fill it completely (fig. 4).

Instead, leave at least 13mm from

the bottom of the filler neck to

allow for expansion. Ensure that

you securely tighten the petrol cap

after filling. (Funnel & fuel not

supplied).

INSTRUCTION MANUAL

WARNING! The following procedures must be carried out before you start the engine of your lawnmower.

STARTING THE ENGINE

Starng the engine

1. Make sure that your mower is

on a safe, at area (a paved area

or path is ideal - avoid thick wet

grass and gravel surfaces) away

from fuel or fueling area to

make starting safe.

2. Firmly hold the brake handle

with one hand, and then with

your other hand pull the cord

slowly until you feel resistance.

Then pull vigorously with one

positive action (Fig. 7). Guide the

cord back to it’s rest position (do

not release).

4. To turn off your mower, release

the brake handle.

Fig 7

USING YOUR MOWER

Aach the Grass Collecon Bag

The grass collection bag attaches

easily by lifting the mower’s Rear Flap

with one hand (Fig. 9) and slide the

grass collection bag into position (Fig.

10).

Cung Height Adjustment

For best results adjust the cutting

height of your mower to suit the

mowing conditions. Do not try to

remove too much grass in one pass.

Adjustment of the cutting height is

made centrally. Turn off the mower

and take the weight of the mower

by lifting. Take hold of the cut height

adjustment lever, positioned on the

mower’s right hand rear wheel.

Move the lever outwards to release

it from its locating notch. Move

the lever towards the front of the

machine to increase the cutting height

and towards the rear to reduce the

cutting height. Return the lever to

the locating notch to set the desired

cutting height.

securely into its serrated holder (Fig.

11).

Mowing your Lawn

Start your mower (see: Starting

the engine). Keep hold of the Brake

(OPC) Lever (releasing the Brake

(OPC) Lever will stop the engine to

avoid accidents) (Fig. 12). To power

the mower forward move the Drive

Lever up and forward (Fig. 13). The

mower can be pushed with the drive

disengaged for more precise handling.

After mowing and emptying the Grass

Collection Bag ensure the engine is not

running and turned off.

Cleaning your Mower

Cut grass is damp. Regular cleaning

after each use will ensure better

functioning of the mower and reduce

the risk of corrosion or seizure.

the engine to cool then remove

accumulated grass clippings from and

around the engine with a brush. Clean

the grass collection bag annually with

a brush or gentle spray of water and

allow to dry.

Clean underneath regularly -

disconnect the spark plug cap and tilt

the mower backwards. Remove cut

grass with a scraper and a brush.

Do not use a pressure washer or hot

water to clean the mower. Dry off the

machine before storing by leaving it

clean surface to prevent corrosion or

seizure.

Storing your Mower

Store your mower in a dry, well-

sparks or heat sources. Disconnect the

spark plug cap. Avoid storing beneath a

tarpaulin or similar cover as it may

cause condensation resulting in

corrosion.

Winter Storage:

Thoroughly clean the mower. Run

the engine outdoors until fuel tank

is empty or empty fuel using a fuel

suction pump. Dispose of discarded

fuel safely and responsibly. Run

the engine until remaining fuel is

consumed.

Remove the spark plug from the

engine. pour a tablespoon of engine

oil into the cylinder. Gently pull the

starter rope several times to distribute

the oil to protect the cylinder over

winter. Replace and tighten the spark

plug.

Transporng your Mower

Ensure the fuel tank is empty. Run

the engine until any remaining fuel is

consumed. Allow the engine to cool.

How to cut for best results

For best results cut your lawn in

alternative directions switching

direction each time you cut. Cut your

lawn at an equal and regular height.

Slightly overlap your cutting lines.

WARNING! WARNING!

Turn mower off before

adjusting cutting height lever Turn mower off before cleaning

Fig 9 Fig10

Fig12 Fig13

Fig11

INSTRUCTION MANUAL

Andere Handbücher für WER21HW

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Webb Rasenmäher Handbücher

Webb

Webb WER40HPSFX Bedienungsanleitung

Webb

Webb C14L Bedienungsanleitung

Webb

Webb WER16LIHP Installations- und Betriebshandbuch

Webb

Webb WEER38 Bedienungsanleitung

Webb

Webb WER18HP Montage- und Wartungsanleitung

Webb

Webb Werr17 Montage- und Wartungsanleitung

Webb

Webb WER21HW Bedienungsanleitung

Webb

Webb WER18SP Bedienungsanleitung

Webb

Webb WEH18 Bedienungsanleitung

Webb

Webb WEH12R Bedienungsanleitung

Webb

Webb WEER36 Bedienungsanleitung

Webb

Webb WERR17P Bedienungsanleitung

Webb

Webb 1938175001 Bedienungsanleitung

Webb

Webb WER42SP Installations- und Betriebshandbuch

Webb

Webb WER19A Montage- und Wartungsanleitung

Webb

Webb 1938122002 Bedienungsanleitung

Webb

Webb WER19ALSP Bedienungsanleitung

Webb

Webb C12E Bedienungsanleitung

Webb

Webb WERR16 Montage- und Wartungsanleitung

Webb

Webb WER18HW Montage- und Wartungsanleitung

Webb

Webb WEH30 Installations- und Betriebshandbuch

Webb

Webb WER460SP Bedienungsanleitung

Webb

Webb WEER33 Installations- und Betriebshandbuch

Webb

Webb WER18HW4 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung