Weber igrill2 Bedienungsanleitung
User Manual
Table of Contents
In the Box 3
Quick Start Instructions 3
Getting Started 4
Weber®iGrill®App 4
Battery Replacement 5
Powering On & Off 5
Connecting 6
Disconnecting 7
Mounting 7
Probe Use 8
Probe Wrap Use 9
Using the iGrill® 2 9
Display 9
Probe Toggle Buttons 10
Proximity Sensor 11
Custom & Preset Alarms 11
Setting Up A Cooking Alarm 12
Preset Alarms for Different Types of Meats 12
Creating a Custom Preset 12
Pre-Alarm Notication 13
Renaming Probes 14
Timer Tool 14
Globe Tool 14
Graph Tool 14
Problem Solving 15
Disclaimer 19
Regulations 19
3
In the Box
Inside your iGrill® 2 box, you will nd:
• 1 iGrill® 2
• 2 AA Batteries
• 2 Pro Meat Probes
• 2 Probe Wraps
• 2 Coloured Probe Indicators (Yellow and Red)
• 1 Optional Magnetic Disc
• Quick Start Guide
Quick Start Instructions
1. Download the Weber®iGrill®App from the App Store®or Google
PlayTM Store on one of the following compatible devices:
• iPhone®(4S and later)
• iPad®(3rd generation and later)
• iPad mini™ (all generations)
• iPod touch®(5th generation and later)
• Many Android™ devices equipped with Bluetooth®4.0 and
running Android™ software version 4.3 or later
2. Enable Bluetooth®on your smart device under ‘Settings.’
3. Separate the iGrill® 2 from its base by rmly holding the base with
one hand and gently pulling the iGrill® 2top upwards with the other
hand.
4. On the underside of the iGrill® 2, press down and remove the battery
door. The two AA batteries that are supplied with your iGrill® 2
should be inserted with their negative terminals compressing the
springs. Replace the battery door.
4
5. Clip the iGrill® 2top back onto its base.
6. Plug one or more probes into the probe ports of the iGrill® 2.
7. Press the power button located at the bottom of the faceplate
between the < and > buttons for two seconds. The unit will display
“On”, animate and a single beep will sound, indicating that the
iGrill® 2has powered on.
8. Open the Weber®iGrill®App to connect to your iGrill® 2. Tap on the
white iGrill®logo in the black toolbar at the top of the app. Select
your iGrill® 2from the ‘Available Devices’ drop-down.
9. You are now ready to use your iGrill® 2!
Getting Started
Weber®iGrill®App
The Weber®iGrill®App provides all of the functionality and customization
you will need to get the most out of your iGrill® 2. The Weber®iGrill®App is
compatible with the following devices:
• iPhone®(4S and later)
• iPad®(3rd generation and later)
• iPad mini™ (All generations)
• iPod touch®(5th generation and later)
• Many Android™ devices equipped with Bluetooth®4.0 and running
Android™ software version 4.3 or later
You must be running iOS 7+ or Android™ version 4.3 or later on your
device to use the Weber® iGrill® App. Please visit the App Store®or
Google Play™ Store and search “Weber iGrill” to download the free
Weber®iGrill®App.
Once you have downloaded the app, you will have access to links
for instructional videos, step-by-step instructions and FAQs for
troubleshooting.
5
Battery Replacement
To replace your iGrill® 2 batteries, follow these steps:
• Separate the iGrill® 2 from its base by rmly holding the base with
one hand and gently pulling the iGrill® 2top upwards with the other
hand.
• On the underside of the iGrill® 2, press down on the tab and remove
the battery door.
• Replace the two AA batteries with their negative terminals
compressing the springs and replace the battery door.
Battery Precautions:
• Do not mix fresh and old batteries.
• Do not mix alkaline, standard (carbon zinc) or rechargeable (ni-cad,
ni-mh, etc.) batteries.
• Dispose of spent or damaged batteries according to manufacturer
instructions and local laws.
Powering On & Off
To turn the iGrill® 2on, follow these steps:
• Press the power button located at the bottom of the faceplate
between the < and > buttons.
• The display will animate, and a single beep will be heard, indicating
that the iGrill® 2has powered on.
To turn the iGrill® 2off, follow these steps:
• Press and hold down the power button located at the bottom of the
faceplate between the < and > buttons for several seconds. The
display will show “OFF”.
• Upon releasing the power button, the iGrill® 2will turn off.
6
Auto Shut−Off:
• The iGrill® 2 will stay powered on for ve minutes before
automatically turning off if there are no probes installed and if it is
not paired to a smart device.
• The iGrill® 2will stay powered on for eight hours before automatically
turning off if not paired to a smart device and if probes are installed.
• The iGrill® 2 will stay powered on indenitely if at least one probe is
installed and if it is paired with a smart device.
Connecting
To connect your iGrill® 2to your iPhone®, iPad®, iPod touch®or Android™
device follow these steps:
• Open Settings.
• Tap Bluetooth®.
• Set Bluetooth®to On.
• While turned on, place your iGrill® 2next to your smart device and
open the Weber®iGrill®App. Your smart device will automatically
recognize any available iGrill®products and display them in the
‘Available Devices’ drop-down. You can view the ‘Available Devices’
by tapping the white iGrill® logo at the top, right−hand corner of
the app.
• Select your iGrill® 2from the ‘Available Devices.’ You will then be
prompted to accept a pairing request. Once you accept, your smart
device will pair with the iGrill® 2 and you are ready to congure your
settings and start cooking!
To connect an additional iGrill® 2or other iGrill®product to your iPhone®,
iPad®, iPod touch® or Android™ device, follow these steps:
• While turned on, place your iGrill® 2(or other iGrill®product) next to
your smart device and open the Weber®iGrill®App.
7
• Tap on the white iGrill®logo located at the top of the app to expose
the ‘Available Devices’ drop-down. Select the product you would
like to pair with from the ‘Available Devices.’ Your smart device will
display a pairing request. Once accepted, your smart device will
pair with the additional product you choose. Now you are ready to
congure your settings and start barbecuing!
Disconnecting
While turned on, place your iGrill® 2next to your smart device and open
the Weber®iGrill®App. Your smart device will automatically recognize any
available and previously connected iGrill®products. You can display them
in the ‘Available Products’ drop−down by tapping the 3 lines or dots at the
top right−hand corner of the screen.
If your iGrill® 2is connected, it will be listed under ‘Connected Devices.’
If you would like to disconnect your iGrill® 2, you can swipe to the left on
the product name (i.e. iGrill2) to expose the ‘Disconnect’ option.
Tap ‘Disconnect.’
Mounting
• The base of the iGrill® 2is magnetic for convenient positioning on a
cool portion of your grill, smoker or other magnetic surfaces.
• The iGrill® 2can be taken out of its base, rotated 180° and set back
into its base for two different viewing angles.
• The iGrill® 2comes with an optional magnetic disc which has an
adhesive on one side. This allows the iGrill® 2to magnetically mount
to a non-magnetic surface. The magnetic disc has a protective cover
on its face to protect it from being scratched.
To mount your magnetic disc, please follow these below steps:
• Clean the surface thoroughly where the magnetic disc will be
adhered to ensure proper bonding.
• Remove the lm covering the adhesive on the magnetic disc.
• Adhere the magnetic disc to your desired surface.
8
• Let the magnetic disc bond to the surface for 6-12 hours before
mounting your iGrill® 2to the disc.
• Place your iGrill® 2on the magnetic disc.
The magnetic base is not designed to withstand
high heat and it must be placed on a cool surface.
If the surface is too hot to touch, it’s too hot for
the iGrill® 2base!
Probe Use
• Pro Meat Probes should always be inserted into the thickest, centre
part of the item being cooked for an accurate temperature reading.
• When using the included Pro Meat Probes that are included with the
iGrill® 2, be sure to route the probe wire where it will not be exposed
to ames or temperatures exceeding 326°C. Probes should avoid
temperatures below -30°C.
• When using Standard Meat Probes, which are sold separately,
be sure to route the probe wire where it will not be exposed to
ames or temperatures exceeding 300°C. Probes should avoid
temperatures below -30°C.
• The Pro Ambient Probe, also sold separately, should be clipped
between two grates inside your grill, smoker or oven. Ensure the tip
of the probe does not touch the grates. Also, be sure to route the
probe wire where it will not be exposed to ames or temperatures
exceeding 326°C, and avoid temperatures below -30°C.
• The included Probe Wraps included with your iGrill® 2allow for
convenient storage of your probes and are magnetic so that they
can be stored under your iGrill® 2when not in use.
9
The coloured probe indicators are for visual identication
of the probe(s) within the app and cosmetic purposes only.
They are not designed for heat safety.
The probes should be cleaned by wiping them down with a
damp towel or sanitary wipe. The probes are not dishwasher
safe. Take care not to get the wiring of the probes wet as
well as the area where the probes’ wiring meets the probe.
The probes are not waterproof and damage may result from
water exposure. Never submerge your probes in water.
Temperatures below -30ºC or above 300ºC will not display
in the Weber®iGrill®App and will cause the probe to
disappear from connection.
Probe Wrap Use
To wrap your probe(s):
• Hold the probe wrap so that the clip segment is on the bottom left
and the logo is legible in the centre of the probe wrap.
• Snap the probe into the probe wrap’s clip, ensuring that the probe’s
body follows the contour of the probe wrap and leaves a 1,27 cm
gap between the probe and the wire channel of the probe wrap.
The tip of the probe should be pointed downward.
• Wrap your probe’s wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the iGrill®2
Display
The display of the iGrill® 2 contains the following:
10
Display
• Displays temperature of currently active probe.
• Displays “DC” for temperatures below -30ºC.
• Displays “DH” for temperatures above 300ºC.
• Displays “OFF” during power off sequence.
• Animates during power on sequence and during reset.
Bluetooth®LED
• Blinks blue when discoverable and awaiting pairing.
• Illuminates solid blue when paired.
Probe Indicator LEDs
• Far left side LED illuminates to indicate Probe 1 temperature is
being displayed.
• Middle left side LED illuminates to indicate Probe 2 temperature is
being displayed.
• Middle right side LED illuminates to indicate Probe 3 temperature is
being displayed.
• Far right side LED illuminates to indicate Probe 4 temperature is
being displayed.
Probe Toggle Buttons
The iGrill® 2has two buttons adjacent to the power button to toggle
between probes when there is more than one probe connected.
• Pressing the < or > button will switch from the currently displayed
probe temperature (as indicated by the illuminated probe indicator
LED) to the next probe.
• Holding either the < or > button down for one second will activate
a cycle that will continuously cycle through displaying each probe’s
temperature.
Andere Handbücher für igrill2
2
Inhaltsverzeichnis
Andere Weber Grill Handbücher
Weber
Weber Genesis 1300 Bedienungsanleitung
Weber
Weber BABY Q 100 Bedienungsanleitung
Weber
Weber Genesis 310 Bedienungsanleitung
Weber
Weber CHARCOAL Bedienungsanleitung
Weber
Weber Weber Wok Bedienungsanleitung
Weber
Weber Platinum 2200 LP Bedienungsanleitung
Weber
Weber 89374 Bedienungsanleitung
Weber
Weber Genesis S-310 Bedienungsanleitung
Weber
Weber E/S-310/320 Bedienungsanleitung
Weber
Weber Genesis II E-315 Bedienungsanleitung
Weber
Weber 57882 Bedienungsanleitung
Weber
Weber 1000 LX Series Bedienungsanleitung
Weber
Weber E-210/310 Bedienungsanleitung
Weber
Weber Summit 670 Datenblatt
Weber
Weber Summit 89565 Bedienungsanleitung
Weber
Weber 42090 Bedienungsanleitung
Weber
Weber SUMMIT S-670 Bedienungsanleitung
Weber
Weber 57884 Bedienungsanleitung
Weber
Weber Summit E 470 Bedienungsanleitung
Weber
Weber PULSE Bedienungsanleitung
