WELLTECH ATA Series Bedienungsanleitung
ATA Web User Guide
VoIP ATA series
(ATA171plus, ATA172plus,
ATA-171, ATA-172,
ATA-171M, ATA-171P)
User Guide
Released Date : January-2012
Firmware Version : V.300
ATA Web user guide
Welltech Technology Co., Ltd. 2 / 88 2012/1/2
1. Introduction........................................................................................................................4
2. Hardware Overview.........................................................................................................4
2.1 Two RJ-45 Network interface. ..........................................................................4
2.2 One or two RJ-11 analog telephone jack and line interfaces..............4
2.3 LED Indication........................................................................................................4
3. Software Overview..........................................................................................................4
4. Keypad Interface from analog phone set of ATA.................................................5
5. Instruction of Web Environment................................................................................7
5.1 Default setting........................................................................................................7
5.2 ATA network connection .....................................................................................7
5.3 Login VOIP Web page..........................................................................................7
5.4 VoIP main setting page.......................................................................................7
5.5 System Information..............................................................................................9
6. Phone..................................................................................................................................17
6.1 Phone Book............................................................................................................17
6.2 Dial Plan setting...................................................................................................19
6.3 Call Services..........................................................................................................28
6.4 General....................................................................................................................36
6.5 Volume.....................................................................................................................39
7. Network environment...................................................................................................41
7.1 WAN (network setting)......................................................................................41
7.2 DDNS........................................................................................................................43
7.3 VLAN.........................................................................................................................45
7.4 VPN (PPTP/L2TP connection)..........................................................................47
7.5 SNTP.........................................................................................................................48
8. NAT......................................................................................................................................49
8.1 LAN............................................................................................................................49
8.2 DMZ & MAC Clone...............................................................................................50
8.3 Virtual Server........................................................................................................51
9. SIP Setting........................................................................................................................52
9.1 Service (SIP register setting).........................................................................52
9.2 Codec .......................................................................................................................55
9.3 Advanced................................................................................................................57
9.4 STUN (STUN & Froce configuration)............................................................64
10. Management (Advanced configuration)..............................................................65
10.1 Status Log............................................................................................................65
10.2 Auto Configuration............................................................................................67
10.3 Auto Update........................................................................................................69
10.4 New Firmware....................................................................................................71
10.5 Advanced..............................................................................................................72
10.6 Password..............................................................................................................77
10.7 Tones Setting......................................................................................................80
10.8 Default...................................................................................................................84
10.9 Language..............................................................................................................85
11. Save & Reboot..............................................................................................................86
ATA Web user guide
Welltech Technology Co., Ltd. 3 / 88 2012/1/2
11.1 Function................................................................................................................86
11.2 Instruction...........................................................................................................86
12. Logout..............................................................................................................................87
12.1 Fuction...................................................................................................................87
12.2 Instruction...........................................................................................................87
ATA Web user guide
Welltech Technology Co., Ltd. 4 / 88 2012/1/2
1. Introduction
This user’s manual is for all ATA series VoIP terminal adapter (ATA). This user’s
manual explains the IVR instruction, web configuration, and command line
configuration for the ATA. Before using the ATA, some setup processes are required
to make the ATA work properly. Please refer to the “Instruction of Web Environment”
for further information.
2. Hardware Overview
The ATA has the following interfaces for Network, telephone interface, LED indication,
and power connector.
2.1 Two RJ-45 Network interface.
These two interfaces support 10/100Mps Fast Ethernet. You can connect WAN RJ-45
Fast Ethernet port to the ADSL or Switch, and connect the LAN port to your
computer.
2.2 One or two RJ-11 analog telephone jack and line interfaces.
You can connect one analog telephone to the terminal adapter and one PSTN line
(ATA-171P or ATA-171M). Or, two analog telephone sets at ATA172plus and ATA-172.
Or, one telephone set at ATA171plus and ATA-171.
2.3 LED Indication.
There are three LED indicators on the ATA to show the Power, Register, and Off-Hook
status.
3. Software Overview
Network Protocol Tone
SIP v1 (RFC2543), v2 (RFC3261)
IP/TCP/UDP/RTP/RTCP
IP/ICMP/ARP/RARP/SNTP
TFTP Client/DHCP Client/ PPPoE Client
Telnet/HTTP Server
DNS Client
NAT/DHCP Server
Ring Tone
Ring Back Tone
Dial Tone
Busy Tone
Programming Tone
Phone Function
Codec
Volume Adjustment
Speed dial key
Phone book
Flash
G.711: 64k bit/s (PCM)
G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)
G.729A: 8k bit/s (CS-ACELP)
G.729B: adds VAD & CNG to G.729
G.723.1
IPAssignment
Static IP
DHCP
PPPoE
Voice Quality
VAD: Voice activity detection
CNG: Comfortable noise generator
LEC: Line echo canceller
Packet Loss Compensation
Adaptive Jitter Buffer
Security
HTTP 1.1 basic/digest authentication for Web setup
MD5 for SIP authentication (RFC2069/ RFC 2617)
QoS
Call Function
ToS field
Call Hold
Call Waiting
Call Forward
Caller ID
3-way conference
NAT Traversal
STUN
Configuration
ATA Web user guide
Welltech Technology Co., Ltd. 5 / 88 2012/1/2
DTMF Function
Web Browser
Telnet
IVR/Keypad
In-Band DTMF
Out-of Band DTMF
SIP Info Firmware Upgrade
SIP Server
Registrar Server (Five SIP accounts)
Outbound Proxy
TFTP
HTTP
4. Keypad Interface from analog phone set of ATA
You can use analog phone set’s keypad to operate, configure and listen to
configuration (IVR play voice messages in English) at ATA without using web
interface. The following table is the access code of each feature. Off-Hook
analog phone and dial IVR access code and follow the voice prompts to
configure ATA IP address and other features.
Group IVR Action IVR access code Parameter(s) Notes:
Function Dial out from
PSTN Line 0＊None
Press 0* can route your call to PSTN
Line from analog phone set directly,
you can dial out from PSTN Line. (For
model ATA-171P and ATA-171M only)
Function Unlock keypad
setting #190# None After you unlock keypad setting, you
may start to configureATA from
keypad.
Function Reboot
#195# None After you hear “Option Successful”
from IVR message, please hang-up.
The system will reboot automatically.
Function Factory Reset
#198# None
System reboot automatically.
WARNING: ALL “User-Changeable”
NONDEFAULT SETTINGS WILL BE
LOST including network and service
provider data.
Function Enable PPTP
client #116# None System will automatically reboot and
PPTP client will be enabled
Function Disable PPTP
client #117# None System will automatically reboot and
PPTP client wll be disabled
Function Enable VLAN
#118# None System will automatically reboot and
VLAN will be enabled.
Function Disable VLAN
#119# None System will automatically reboot and
VLAN will be disabled
Function Enable Call
Waiting #138# None System will automatically reboot and
Call Waiting will be enabled.
Function Disable Call
Waiting #139# None System will automatically reboot and
Call Waiting will be disabled.
Function Enable
Anonymous #140# None System will automatically reboot and
Send Anonymous CID was enabled.
Function Disable
Anonymous #141# None System will automatically reboot and
Send Anonymous CID was disabled.
Function Blind Transfer
#510# None
This feature was only performed
during a phone call. ForATA-171M,
this will transfer the current IP line to
another IP line.
Function Attendant Transfer
#511# None
Only be performed in a phone call
conversation. For ATA-171M, this
will transfer the line to IP from PSTN
(must be in IP mode to execute this
command)
Function 3-way calling (IP
Conference) #512# None Only be performed in a phone call
conversation.
Function Attendant Transfer
#514# None
Only be performed in a phone call
conversation. For ATA-171M, this will
transfer the call to PSTN from IP (must
be in PSTN mode to execute this
command)
Info Check WAN IP
#126# None IVR will announce the current WAN IP
ATA Web user guide
Welltech Technology Co., Ltd. 6 / 88 2012/1/2
Address address of the ATA
Info Check LAN IP
Address #120# None IVR will announce the current LAN IP
address of the ATA
Info Check IP Type
#121# None IVR will announce if DHCP in enabled
or disabled.
Info Check the Phone
Number #122# None IVR will announce current in use VoIP
number
Info Check Network
Mask #123# None IVR will announce the current network
mask of the ATA.
Info Check Gateway IP
Address #124# None IVR will announce the current gateway
IP address of the ATA.
Info Check Primary
DNS Server
Setting #125# None IVR will announce the current setting
in the Primary DNS field.
Info Check Firmware
Version #128# None IVR will announce the version of the
firmware running on theATA.
Setting Set DHCP client #111# None The system will change to DHCP
Client type
Setting Set Static IP
Address #112xxx*xxx*xxx*xxx# Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
DHCP will be disabled and system will
change to the Static IP type.
Setting Set Network Mask #113xxx*xxx*xxx*xxx# Enter value-using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point. Must set Static IP first.
Setting Set Gateway IP
Address #114xxx*xxx*xxx*xxx# Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point. Must set Static IP first.
Setting Set Primary DNS
Server #115xxx*xxx*xxx*xxx# Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point. Must set Static IP first.
Setting Set Codec
#130+[1-8]#
1:G.711 u-Law, 2: G.711 a-Law,
3:G.723.1, 4: G.729a, 5: G.726 16K,
6:G.726 24K, 7: G.726 32K, 8: G.726
40K,
You can set the codec you want to the
first priority.
Setting Set Handset Gain #131+[00~15]# Handset Gain from 0~15 You can set the Handset gain to proper
value, default is 6
Setting Set Handset
Volume #132+[00~12]# Handset Volume from 0~12 You can set the Handset volume to
proper value, default is 10
Setting Set Auto
Configuration
Mode #137X# Select the auto configuration mode, in the
X field, you can press the following;
0:OFF, 1:TFTP, 2:FTP
You can set the auto configuration
method you want, default is off
Setting Set Auto
Configuration For
TFTP Server #135xxx*xxx*xxx*xxx# Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
Must set auto configuration method to
TFTP first
Setting Set Auto
Configuration For
FTP Server #136xxx*xxx*xxx*xxx# Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
Must set auto configuration method to
FTP first
ATA Web user guide
Welltech Technology Co., Ltd. 7 / 88 2012/1/2
5. Instruction of Web Environment
5.1 Default setting
5.1.1 Default network setting
Netwrok Mode: Default NAT Mode
WAN Port: DHCP Client Mode
LAN Port: DHCP Server Enable, IP Address: 192.168.123.1
5.1.2 Web login
VoIP Web Login default link, http://192.168.123.1:9999
Account Login :
Administrator: Login Account: root, Password: test
System: Login Account: system, Password: test
Normal: Login Account: user, Password: test
5.2 ATA network connection
Please connect PC Ethernet cable to LAN port, and set PC to DHCP mode. Default IP address
is 192.168.123.150.
5.3 Login VOIP Web page
Provide login system management page.
User Name Input user’s name, it can be numeral or letters.
Password Input password, it can be numeral or letters.
Login [button] Login to the ATA
Clear [button] Clear all informations
5.4 VoIP main setting page
5.4.1 Function instructions
Provide below function [Information (system information), Phone (phone
environment), Network (network environment), NAT (local network), SIP (SIP
parameter setting), Management (enhance setting), Save & Reboot , Logout ].
ATA Web user guide
Welltech Technology Co., Ltd. 8 / 88 2012/1/2
5.4.2 Function description
item Description
Gateway Device type: Gateway(ATA) or Phone
Information Current device information list
Phone Phone item provide [Phone Book , Dial Plan , Call Service ,
General setting, Volume setting] function
Network Network setting provide [WAN , DDNS, VLAN , VPN (PPTP/L2TP),
SNTP (time sync)] function
NAT NAT provide [LAN setting, DMZ & Mac Clone, Virtual Server]
function.
SIP SIP provide [Service (SIP registeration), Codec selection,
Advanced setting, STUN (STUN & Fource setting)] function.
Management Management item provide [Status Log , Auto Config , Auto
Update , New Firmware , Advanced , Password , Tones ), Default
(reset to default), Language ]function。
Save & Reboot Save and Reboot function
Help
Logout Logout system.
ATA Web user guide
Welltech Technology Co., Ltd. 9 / 88 2012/1/2
5.5 System Information
5.5.1 Function description
There are network information, firmware version and SIP register status.
5.5.2 System Information example
Figure 1: FXS, FXS+PSTN, FXS+FXO. LAN Mode: Bridge.
(Figure 1)
ATA Web user guide
Welltech Technology Co., Ltd. 10 / 88 2012/1/2
Figure 2: FXS, FXS+PSTN, FXS+FXO; LAN Mode: Bridge + VPN.
(Figure 2)
Andere Handbücher für ATA Series
1
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere WELLTECH IP-Telefon Handbücher
WELLTECH
WELLTECH FXSO GATEWAY SIP 3701A Bedienungsanleitung
WELLTECH
WELLTECH WellPhone-305 Bedienungsanleitung
WELLTECH
WELLTECH LAN Phone 399 Bedienungsanleitung
WELLTECH
WELLTECH SIP-Phone 302 Bedienungsanleitung
WELLTECH
WELLTECH LP399 Series Bedienungsanleitung
WELLTECH
WELLTECH SIP-Phone Bedienungsanleitung
WELLTECH
WELLTECH WellPhone-305 Bedienungsanleitung
WELLTECH
WELLTECH LP399 Series Bedienungsanleitung
