WESTERSTRAND CIRCLE LINE Bedienungsanleitung

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 1 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

Manual

CIRCLE LINE

With NTP

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 2 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

Allmänt

This product is a digital clock for indoor use which is synchronised via NTP. The user can set the light

intensity by a potentiometer inside the clock. The user can set the light intensity. At power failure the time is

updated in a Timekeeper circuit. After the power failure the digital clock starts up on correct time.

The network setting is made via a WEB-browser.

When synchronised, the clock is automatically set to correct time. The colon will flash when time from the NTP

server is accepted.

All versions display time in hours and minutes. Time is expressed in 24 hours format. Seconds are

shown graphically in a circle.

If time is not initially programmed "--:--" is shown instead of digits for time.

LAN connection

The digital clocks are equipped with a RJ45 (10BASE-T) connector for direct connection to the LAN via an

Ethernet switch. Each clock has a unique IP address. The IP address, gateway, subnet mask and server IP

address is set up via a WEB-browser. If DHCP is used the clock will receive its IP address automatically from

the DHCP server.

The clock is delivered with DHCP, fall-back adress 192.168.3.10.

The MAC-address is labelled at the clock.

NTP

To distribute correct time to different users in a Local Area Network (LAN) the Network Time Protocol (NTP)

is used. NTP is a part of the protocol family TCP/IP. Westerstrand digital clocks type Ethernet LAN are

operated and controlled by Time distributed in the Network.

What happens if power is down?

If power is down the diodes are turned off. The internal clock continues to keep correct time at least during 24

hours. When power is up again correct time is displayed directly.

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 3 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

Installation

Remove the back plate from the casing and mount it on wall or bracket. See measurements for

attachment below.

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 4 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

Cable connections to the power supply board are shown in the figure below

Fig. Connection 230V AC

Mains (230V AC, 50Hz) should be connected to the Power terminal. When the clock is

permanently installed a readily accessible disconnect device shall be incorporated in the fixed

wiring. Installation fuse max10A. Power wire 1,5mm².

Connect network LAN to the RJ 45 connector located on C.P.U board at the mounting plate.

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 5 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

Configuration using a WEB-browser

Password

A password is required. Always enter user admin.

Default password is password. If the first letter of the

password is blank no question about user and password

will appear.

If you forget the password, then a TELNET session

must be started. The last line shows a number of

characters within square brackets []. Contact

Westerstrand and enter this value.

After login a list of functions is displayed:

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 6 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

Status >>

Show status of the clock. The information is refreshed every 10th second or by a click on button Refresh.

IP= The IP address of the clock

MAC= Unique address. Always 00-90-C2-aa-bb-cc. The last 3 numbers (aa-bb-cc) are found on the

network card, e.g. CA8E83

UTC= Current UTC time

LT= Current Local time

Country= Country code (ARE = UNITED ARAB EMIRATES)

DST= Daylight Saving Time (Not applicable for United Arab

Emirates)

Sync= Information about synchronisation status

<=4 the clock has not been synchronised

>=5 the clock is synchronised

NTP mode= NTP work mode

NTP server= Address of NTP server

Number of time settings= 1089 (The clock has been synchronised 1089 times)

Uptime= 65305 (The clock has been running 65305 seconds since the last power failure or reset)

Firware= Firware version

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 7 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

General >>

Program general parameters

Name Symbolic name, max. 48 signs. This name is shown in the status menu.

Password Enter a new password. The password must be repeated.

Ignore password by choosing password with a blank as 1st character.

12/24 hour 12h: Time is displayed in 12 hour format.

24h: Time is displayed in 24 hour format.

Firmware On (Checked): Open the clock for firmware download.

Download After restart this value always is Off. Also see section Firmware below.

If On is set by mistake, then the clock must be restarted

Save Save parameters. If new password was entered then the clock will restart. Then the web

reader (e.g. Internet Explorer) also must be restarted.

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 8 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

Network >>

Enter general network parameters.

DHCP Off – Static IP address according to IP below.

On – DHCP IP address with fallback according to IP fallback below.

IP/IP fallback IP address

Gateway Network gateway

Subnet mask Network subnet mask

DNS IP address of DNS server

SNMP If SNMP is ON the clock will send SNMP traps to the selected SNMP server. The clock

also will answer SNMP poll requests. Please contact Westerstrand for more information

about SNMP and MIB-files.

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 9 av 13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

NTP >>

Enter NTP parameters.

NTP mode

Client: Ask ‘NTP server’ for time

DHCP: Ask automatically via the DHCP server (DHCP option 0042)

Broadcast: Accept broadcast time messages.

Client+ A Broadcast NTP message will restart an internal timer. If no broadcast NTP

Broadcast: messages are received, then NTP request will start automatically according

to ‘Interval(s)’.

DHCP+ A Broadcast NTP message will restart an internal timer. If no broadcast NTP

Broadcast: messages are received, the unit will try to receiver NTP server IP address by

using the DHCP server option 042. I found NTP request will start

automatically according to ‘Interval(s)’.

NTP Server Select NTP server, e.g. 192.168.1.237 or as an URL ntp1.sp.se. Also see DHCP server

above.

Country/Timez Select country. A NTP server sends UTC time. The clock will correct this to local time

and adjust for DST (Day-Light-Saving) automatically. A rule for DST (daylight saving

time) for each country is hard coded in the firmware. Also see DHCP server above.

Country Winter Summer Timezone acronym

GBR UTC+0 UTC+1 WET/WEST

CET UTC+1 UTC+2 CET/CEST

ARE UTC+4 UTC+4 United Arab Emirates

Interval Interval in seconds between NTP requests. (Used in

client/server mode only).

Help>>

A short help file in PDF format is displayed.

Dokument: 1872en02.doc

Förf.: TAn

Datum: 2010-11-16

Sida: 10av13

WESTERSTRAND URFABRIK AB

Box 133 Tel. 0506 48 000 Internet:: www.westerstrand.se

545 23 TÖREBODA Fax. 0506 48 051 E-mail: info@westerstrand.se

SNMP

SNMP is enabled in function Network. The clock will send traps to the management server and answer on

polls. The SNMP functions have been tested with a freeware program from IReasoning

(www.ireasoning.com) and with Castle Rocks Management Console SNMPc. Contact Westerstrand for

further information.

RASER

This program is used for finding network clocks and setting parameters. RASER sends broadcast messages

on UDP port 9999. All Westerstrand Ethernet controllers will answer.

Install with setup file SETUP_RASERxxx.EXE (xxx=version e.g. 107). Icon 'RaSer' is created on the

desktop. Start the program. Click on button [Help]. Manual RASER.PDF is displayed. Check this manual

for further information.

Find a Westerstrand Ethernet module

1. Set firmware mask. Examples:

* Search all Westerstrand Ethernet modules (default)

RAWEL Search only modules with letter RAWEL (Digital Clocks) in the firmware text, e.g.

RAWEL-G105

2. Set IP mask. Examples:

255 Broadcast to all, i.e. 255.255.255.255 (default)

13 Only show answers from segment 255.255.13.255

3. Click on button [Search]. The box becomes green. Program RASER will timeout after 5 seconds. Break

a search by a click on [Break].

Andere Handbücher für CIRCLE LINE

Inhaltsverzeichnis

Andere WESTERSTRAND Uhr Handbücher

WESTERSTRAND

WESTERSTRAND Quartz Movement Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Analogue NTP Clock Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND QWTIME III WDP M+S Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Lumex 5 Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Lumex 5 Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND QUARTZ CLOCK Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND CIRCLE LINE NTP PoE Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND KNX Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Analogue NTP Clock Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND LUMEX 7 Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Analogue clock Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Analog indoor clock with WiFi Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND mini WDP-Y Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND AUREA II Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND QUARTZ MOVEMENT Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Analogue NTP Clock Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Lumex 5 Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND Wireless Clock Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND QWTIME III WDP-WL Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND CIRCLE LINE NTP Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND AUREA ALPHA Bedienungsanleitung

WESTERSTRAND

WESTERSTRAND CIRCLE LINE Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung