Whalen SUMCMF-23 Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg., Inc. Page 1 Factory No. 16086

Sumner Corner Media Fireplace

Stock # SUMCMF-23

ADULT ASSEMBLY AND SET-UP REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our customer service number and have your instructions

and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to [email protected]

LOT NUMBER:

DATE PURCHASED: / /

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 2 Factory No. 16086

QUALITY GUARANTEE

We are confident that you will be delighted with your Whalen Furniture purchase.

Should this product be defective in workmanship or materials or fail under normal use, we will

repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is

designed to meet your highest expectations. We guarantee that you will immediately see the value of

our fine furniture.

This warranty gives you specific legal rights and you may also have other rights which vary from

State to State.

Customer Service: 1-866-942-5362

8:30 a.m. - 4:30 p.m., PST, Monday to Friday

www.whalenstyle.com

MANUFACTURER: Whalen Furniture Mfg., Inc.

CATALOG: Sumner Corner Media Fireplace (SUMCMF-23)

DATE OF MANUFACTURE: January 2014

MADE IN CHINA

MAXIMUM RECOMMENDED WEIGHT LOADS

FITS UP TO MOST 45” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.2 kg)

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH

FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND

WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT

PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN CENTRE

OF UNIT; CRT TVS, IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS OR

OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS COULD

FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.

MAXIMUM LOAD 50 lb. (22.6 kg)

PLACE TV BEHIND THE STOPPER

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 3 Factory No. 16086

Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert the Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the KD unit.

XXFINAL

12 43

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 4 Factory No. 16086

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are

present before beginning assembly.

A- Top Panel (1) B- Center Shelf (1) C- Bottom Panel (1)

D- Front Bottom Molding (1) E- Back Bottom Stretcher (1) F- Left Lower Side Panel (1)

G- Left Lower Front Panel (1) H- Right Lower Side Panel (1) I- Right Lower Front Panel (1)

J- Center Front Molding (1) K- Upper Side Panel (2) L- Door (1)

M- Back Panel (1) N- Top Corner Extension (1) O- Corner Long Support (1)

P- Corner Short Support (1) Q- Firebox Support (2) R- Upper Front Panel (2) Fireplace Insert (1)

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 5 Factory No. 16086

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) M8 x 20 mm Wood Dowel

(42+2 extra) (42+2 extra) (40+2 extra) (2+1 extra)

(5) #8 x 1-1/2” Screw (6) #8 x 3/4” Screw (7) 5/8” Flat Head Screw (8) 5/8” Washer Head Screw

(4+1 extra) (3+1 extra) (12+1 extra) (16+1 extra)

(9) 1/2” Bolt (10) 2” Lag Bolt (11) Straight Metal Bracket (12) Angle Metal Bracket

(10+1 extra) (4+1 extra) (2) (2)

(13) Floor Leveler (2) (14) Plastic Connecter (5) (15) Door Pull (1) (16) 5/8” Small Bolt (2)

(17) Acrylic Stopper (1) Glue (1) Touch-up Pen (1) Tipping Restraint Hardware Kit (2)

(Included in plastic bag)

Tools required: Phillips screwdriver and Rubber Mallet (not provided).

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 6 Factory No. 16086

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts listed. Assembly the unit on

a carpeted floor or the empty carton to avoid any scratch.

2. Locate the Top Panel (A), Center Shelf (B) and Bottom Panel (C) with the holes facing up. Securely screw

the Cam Bolts (2) into the designated small holes, as shown above. Fully tighten with a Phillips screwdriver.

Cam Bolt

(22 used in this step)

②

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 7 Factory No. 16086

Assembly Instructions

3. Secure screw the Cam Bolts (2) into the designated small holes on the Left and Right Front Panels (G and I)

and Lower Side Panels (F and H), as shown in the illustration.

Cam Bolt

(10 used in this step)

②

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 8 Factory No. 16086

Assembly Instructions

4. Insert two M8 x 30 mm Wood Dowels (3) into the inner holes of the Left Lower Side Panel (F). Tap in with

a rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.

5. Align the drilled holes on the Left Lower Front Panel (G) with the inserted Wood Dowels (3) on the Left

Side Front Panel (F), and then press them together. Secure the Front Panel (G) into place by engaging two

Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).

6. Repeat the last two steps to combine the Right Lower Side and Front Panels (H and I) together.

M8 x 30 mm Wood Dowel

(4 used in this step)

③

Cam Lock

(4 used in this step)

①

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 9 Factory No. 16086

Assembly Instructions

7. Align and attach the Center Front Molding (J) to the Center Shelf (B) by using two M8 x 30 mm Wood

Dowels (3) and two Cam Locks (1). Make sure that the Cam Locks face inward. As shown above.

Cam Lock

(2 used in this step)

①

M8 x 30 mm Wood Dowel

(2 used in this step)

③

Stock # SUMCMF-23

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 10 Factory No. 16086

Assembly Instructions

8. Align and attach the Back Bottom Stretcher (E) to the Bottom Panel (C) by using two M8 x 30 mm Wood

Dowels (3) and three Cam Locks (1). Make sure that the Cam Locks face inward.

9. Proceed to fasten the Front Bottom Molding (D) to the Bottom Panel (C) with two M8 x 30 mm Wood

Dowels (3) and three Cam Locks (1). As shown.

Cam Lock

(6 used in this step)

①

M8 x 30 mm Wood Dowel

(4 used in this step)

③

Andere Handbücher für SUMCMF-23

Inhaltsverzeichnis

Andere Whalen Kamin im Innenbereich Handbücher

Whalen

Whalen Linwood MNFP60LW26IO Bedienungsanleitung

Whalen

Whalen WSF59AV26C-WH Bedienungsanleitung

Whalen

Whalen Windham Bedienungsanleitung

Whalen

Whalen WSLWFP54-6 Bedienungsanleitung

Whalen

Whalen Farmstead WSF60FM23R-AO Bedienungsanleitung

Whalen

Whalen Barston WMFP48EC-25DC Bedienungsanleitung

Whalen

Whalen Millstead WSF60MS26GAO Bedienungsanleitung

Whalen

Whalen WSF54OW30W Bedienungsanleitung

Whalen

Whalen WH300-26C2D-RGBM Bedienungsanleitung

Whalen

Whalen 48" Barn Door Fireplace Bedienungsanleitung

Whalen

Whalen Middleton WSF72WV26-DB Bedienungsanleitung

Whalen

Whalen Evanston MNFP60ES26GA Bedienungsanleitung

Whalen

Whalen Glenmore WS03061226 Bedienungsanleitung

Whalen

Whalen MNFP52EW26CA Bedienungsanleitung

Whalen

Whalen Shelby WSF72SY26C Bedienungsanleitung

Whalen

Whalen Middleton WSF60WV23-DB Bedienungsanleitung

Whalen

Whalen SF122-23A Bedienungsanleitung

Whalen

Whalen WSF36SH23C Bedienungsanleitung

Whalen

Whalen Linwood MNFP48LW23IO Bedienungsanleitung

Whalen

Whalen Shelby WSF36SY23C Bedienungsanleitung

Whalen

Whalen MNFP60PV26WT Bedienungsanleitung

Whalen

Whalen Barston Laminated Fireplace Handbuch

Whalen

Whalen Middleton WSF48WV23-DB Bedienungsanleitung

Whalen

Whalen WMFP31EC-1 Handbuch

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch