Whalen Fallbrook SPUS-FBPS-GM Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2021-03-19 Rev. 0001-A

Fallbrook Printer Stand

Model # SPUS-FBPS-GM

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP

POINTS, SHARP EDGES AS RECEIVED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenfurniture.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Fallbrook Printer Stand

MODEL # SPUS-FBPS-GM

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

You are now ready to assemble the KD unit

M A X I M U M

R E C O M M E N D E D W E I G H T

L O A D S

MAXIMUM LOAD 22.7 kg / 50 lb

MAXIMUM LOAD 4.5 kg / 10 lb

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS

INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

123

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Left Side Panel (Qty. 1)

C- Right Side Panel (Qty. 1) D- Back Panel (Qty. 1) E- Bottom Panel (Qty. 1)

F- Adjustable Shelf (Qty. 1) G- Cross Bar (Qty. 1) H- Drawer Front Panel (Qty. 1)

I- Drawer Back Panel (Qty. 1) J- Drawer Left Side Panel (Qty. 1) K- Drawer Right Side Panel (Qty. 1)

L- Drawer Bottom Panel (Qty. 1) M- Drawer Bottom Support (Qty. 1) CL- Left Slide Track (Qty. 1)

CR- Right Slide Track (Qty. 1) DL- Left Slide Runner (Qty. 1) DR- Right Slide Runner (Qty. 1)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Small Cam Lock (2) Large Cam Lock (3) Cam Bolt (4) M6 x 30 mm Wood Dowel

(Qty. 6) (Qty. 16) (Qty. 22) (Qty. 4+1 extra)

(5) M8 x 30 mm Wood Dowel (6) M4 x 30 mm Screw (7) M3.5 x 14 mm Screw (8) M4 x 10 mm Bolt

(Qty. 22+1 extra) (Qty. 8+1 extra) (Qty. 12+1 extra) (Qty. 2)

(9) Drawer Pull (10) Shelf Pin (11) Floor Leveler

(Qty. 1) (Qty. 4) (Qty. 4)

Tools required (not included): Phillips screwdriver.

Assembly Instructions

NOTE: DO NOT fully tighten all cam locks and bolts until you finish assembling all parts. Once

assembled, go back and fully tighten all cam locks and bolts.

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (3) into the designated small holes on the Drawer Front Panel (H) using a

Phillips screwdriver.

3. Insert the Small Wood Dowels (4) into the inner holes on the Drawer Back Panel (I) at both end and

attach it between the Drawer Side Panels (J and K) with four 30 mm Screws (6).

Grooves line up with each

other and face inward

Assembly Instructions

4. Slide the Drawer Bottom Panel (L) into the grooves until fully inserted into the Drawer Back Panel (I).

5. Fasten the Drawer Bottom Support (M) to the Drawer Back Panel (I) with two 30 mm Screws (6).

Cam locks mounting

holes faces outward

Assembly Instructions

6. Stand the previous assembly at its back panel and insert the Small Wood Dowels (4) into the inner holes

on the Drawer Side Panels (J and K).

7. Position the Drawer Front Panel (H) onto the inserted Wood Dowels (4) and fasten it in place by engaging

six Small Cam Locks (1). (Refer to page 2 on Cam Lock system operation supplement). Make sure that

the Drawer Bottom Panel (L) fits securely into the groove of the Drawer Front Panel (H).

8. Fasten the Left Slide Runner (DL) to the Drawer Left Side Panel (J) using three 14 mm Screws (7).

9. Repeat the same procedure to fasten the Right Slide Runner (DR) to the Drawer Right Side Panel (K).

The end roller

faces backward

The groove is

located at back

Assembly Instructions

10. Attach the Drawer Pull (9) to the front of the Drawer Front Panel (H) with two 10 mm Bolts (8).

11. Using the pilot holes as a guide, fasten the Left Slide Track (CL) to the Left Side Panel (B) with three 14

mm Screws (7).

Mounting Holes

Slide roller

The opening faces downward

Assembly Instructions

12. Repeat the same procedure to fasten the Right Slide Track (CR) on the Right Side Panel (C).

13. Securely screw the Cam Bolts (3) into the designated small holes on the Top Panel (A) and Side Panels

(B and C) using a Phillips screwdriver.

Mounting Holes

Slide roller

Assembly Instructions

14. Attach the Back Panel (D) to the Top Panel (A) with two Large Wood Dowels (5) and two Large Cam

Locks (2).

15. Fasten the Bottom Panel (E) to the Back Panel (D) using two Large Wood Dowels (5) and two 30 mm

Screws (6).

Cam lock mounting

holes face outward

Cam locks face inward

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Devon File EC-DEDF Bedienungsanleitung

Whalen

Whalen ATD60H-13AX Bedienungsanleitung

Whalen

Whalen WSWB72-ST-E Bedienungsanleitung

Whalen

Whalen Raine File White Bedienungsanleitung

Whalen

Whalen LEVELUP GS-BF16R-B Bedienungsanleitung

Whalen

Whalen WSCSC6172WB Bedienungsanleitung

Whalen

Whalen Bayside CUS60AC-1 Bedienungsanleitung

Whalen

Whalen WSC72-MW-E Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-12-UK Bedienungsanleitung

Whalen

Whalen Industrial Audio Tower Bedienungsanleitung

Whalen

Whalen Kellum WMFP54EC-26GR Bedienungsanleitung

Whalen

Whalen CSC7PCHD-3VN Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CSC7PD-8-2PC Bedienungsanleitung

Whalen

Whalen WSHK5SQB Bedienungsanleitung

Whalen

Whalen WSHD5SQB Bedienungsanleitung

Whalen

Whalen Springfield SPLS-SPMDBK-HW Bedienungsanleitung

Whalen

Whalen SPCA-MMPD Bedienungsanleitung

Whalen

Whalen Trimble Bookcase ECOM-TR30BK Bedienungsanleitung

Whalen

Whalen OD-LA60LD Bedienungsanleitung

Whalen

Whalen Evans Creek CTCDC-1 Bedienungsanleitung

Whalen

Whalen SPLS-RBK-WH Bedienungsanleitung

Whalen

Whalen Fallbrook SPUS-FBBK-GM Bedienungsanleitung

Whalen

Whalen MLCRD Bedienungsanleitung

Whalen

Whalen Villa Tuscano Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung