Whirlpool FHT1200 Installationsanleitung
產品安全指引、使用說明及安裝指南
Model 產品型號 : FHT1200
2
繁體中文
1
18
Please read the following instructions carefully before using the device, and keep this user manual for future reference.
為了您能更好地使用本產品，請您在使用前仔細閱讀此使用說明書，以發揮本機的最佳效能，並妥善保管好說明書。
1
EN
USER MANUAL
2-3
4
5
6
7
7
8
8
9-12
13-15
16
16
INDEX
Important Safety Information
Product Overview
Product Features
Product Structure
Touch Control Panel And Remote Display Panel
Before Use
Product Unpacking
Remote Battery Installation
Positioning
Operation Condition
Use Your 2 in 1 Fan Heater
Operation Method of Each Function Button
On/Off Mode
Heating Mode Selection
Fan Mode Selection
Auto Swing
Timer
Temperature Setting For Heating Mode
Continuous Electric Memory Function
Care and Maintenance
Safety Warning & Safety Precautions
Cleaning & Maintenance
Product Specification
9
10
10
10
10-11
11-12
12
2
Important Safety Information
Important Safety Information
- Please don’t have the wind blow
to the children directly for a
long time. It may influence the
children’s health.
- Please don’t touch the plug by
wet hands.
- Persons (including children)
with reduced physical, sensory
or mental capabilities, or any
individual lacking experience
and knowledge should be
supervised or given instruction
by a person responsible for
their safety when they using
this appliance. Unless being
supervised, children can’t use
this appliance.
Intended Use Of The Product
- Do not use it on outdoor areas.
- This appliance is for household
use only.
Installation
- If there is abnormal smell or
noise when uses the product,
please stop using and pull out
the power cord immediately.
- Please don’t put the wood or
metal stick into the air inlet or
outlet. It may lead to electric
shock, or product damage.
- Place the appliance on a stable
and flat surface to avoid it
tipping over or being knocked
over.
- Do not immerse the appliance
or the electrical cord or plug in
liquids.
- Do not use the 2 in 1 Fan Heater
in front of or close to an open
window.
- Store the appliance away from
direct sunlight and out of the
reach of children.
- Do not insert any objects
into the 2 in 1 Fan Heater.
- When using the 2 in 1 Fan
Heater, keep combustible
materials or explosive objective,
away from 2 in 1 Fan Heater.
- Do not share the dame
circuit receptacle with others
appliances, otherwise may
have burn hazard.
- Do not use extension cord.
- Do not operate the appliance
with a damaged cord or plug.
Send the 2 in 1 Fan Heater
to a suitably qualified or
appointed service agent for
inspection and repair.
- Unplug 2 in 1 heater if it fails to
operate properly and inform
customer service center.
- Filter must be installed in
place appropriately when
using, otherwise, there may
be potential fire hazard.
Your Safety And Safety Of
Others Is Very Important
• Follow all the safety precautions
listed below for safety and
to reduce the risk of injury or
electrical shock.
- Read all the instructions
carefully before using this
appliance and keep then
for future reference.
- Please read all instructions
carefully before using this
product. When using the
appliances, should always
follow this instruction to
reduce the risk of fire, electric
shock, and injury to person.
- Retain the manual. If you pass
the product to a third party,
make sure to include this
manual.
- This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
- Children should be supervised
to ensure that they do not
play with the appliance.
- Unplug the appliance during
cleaning.
- some parts of this product
can become very hot and
may cause burns. Particular
attention has to be given
where children and vulnerable
people are present.
CAUTION
3
EN
Important Safety Information
- The 2 in 1 Fan Heater must not
be located immediately below a
socket outlet or other appliance.
- Do not use this 2 in 1 Fan Heater
in the surrounding of a bath, a
shower or a swimming pool.
- Stop using immediately when
water splash into product,
otherwise, it may have electric
shock hazard.
- Do not use in wet area such as
bathroom.
- Make sure no water inside the
product before you use it.
- Do not use the appliance for any
purpose not expressly specified
in this manual.
- This appliance must be attended
at all times when it is switched
on.
- Do not put clothes or towels
directly on the 2 in 1 Fan Heater
or use it to dry laundry.
- Do not touch hot surface when
in use.
- Do not use the 2 in 1 Fan Heater
near animals or plants.
- Dispose of packaging properly.
- The 2 in 1 Fan Heater only for
personal use, not for heating
any liquids or other danger
things.
- Do not use 2 in 1 Fan Heater with
a programmer, timer, separate
remote-control system or any
other device that switches the 2
in 1 Fan Heater on automatically,
since a fire risk exists if the 2
in 1 Fan Heater is covered or
positioned incorrectly.
- Do not place the power cord on
hot surface when using.
Child Safety
• Do not place the appliance close
to children or pets. Never let
children operate this appliance.
Close supervision is necessary
when this is used near children.
Cleaning And Maintenance
•
Do not use this 2 in 1 Fan Heater
in small rooms when they are
occupied by persons not capable
of leaving the room on their own,
unless constant supervision is
provided.
• In order to use the product
more conveniently and avoid
any danger caused by wrong
operation, please pay attention
to the notices.
- Turn it off and remove plug
until the product stops
working and cool down
completely before clean
the unit.
Electrical Warnings
• Must be supplied with 220V
-240V~/50Hz.
• The plug must be plugged
into an appropriate outlet that
is installed and grounded in
accordance with local law and
regulations.
• Do not modify the plug
provided with the appliance.
If it does not fit the outlet,
please consult with a qualified
electrician for advice.
- If the supply cord is damaged,
it must be replaced by
the manufacture, qualified
persons in order to avoid a
hazard.
- Please do not pull out the
power plug by pulling the
power cord. It may cause
the power cord damage or
electric shock.
- Please don’t put heavy unit
onto the power cord or fold
the power cord. It may lead to
electric shock.
- Disconnect power plug from
power supply when the
appliance is not in use for a
long period of time.
- Do not pull the power supply
cord to remove it from the
socket. Do not twist or press
the power supply cord, and
make sure it is not broken.
Correct Use
- In order to avoid overheating,
do not cover the 2 in 1 Fan
Heater.
WARNING
WARNING
4
1. 2 in 1 Fan Heater include fan and heating function, available in the whole year.
2. PTC ceramic heating element, change the power automatically based on the variation of the
ambient temperature. No oxidation characteristics bring the product longer service life.
3. Two heating and fan mode levels selection.
4. 1-12 hours timer.
5. Automatic swing, comfortable airflow and heating supply, wind downy, heat evenly.
6. Temperature Setting Range 15℃-35℃.
7. Using crossflow cooling fan, low noise (Low Fan Mode).
8. With Tip-over safety protection, double over-heating protection ( Themostat, temperature
fuse), use more safety.
9. Convenient operation with infrared remote control function.
10. Wide-angle air supply.
Product Overview
Product Features
5
EN
Warning Label:
To avoid overheat, Do not
cover the 2 in 1 Fan Heater.
1. Remote control
receiver
2. Wind outlet
3. Front cover
4. Base
5. Filter cover
6. Filter
7. Top cover
8. Control panel
9. Power cord
10. Power switch
11. Remote controller
Product Overview
Product Structure
Front View Side View Back View
11
10
05
01
02
03
04
09 07
08
06
Top View
6
1. ON/OFF button
2. Power indicator.
3. High / Low Fan mode button. Switch the fan mode, High/Low fan mode selection.
4. High Fan mode indicator. When the lights on (Orange Light), the High Fan mode is activated.
5. Low Fan mode indicator. When the lights on (Orange Light), the Low Fan mode is activated.
6. High/Low Heating mode button. Switch the heating mode, High/Low Heating mode selection.
7. High Heating mode indicator. When the lights on (Orange Light), the High Heating mode is activated.
8. Low Heating mode indicator. When the lights on (Orange Light), the Low Heating mode is activated
9. Timer / temperature set button. Setup the operation time & temperature. (P.10 -12)
to set the operation
10. Timer / temperature number button
11. Temperature set indicator. When the lights on, can press
12. Timer indicator. When the lights on, can press to set the operation time .
13. Swing button.
14. Swing indicator.
Button Instructions
Remote Display Panel
Touch Control Panel /
Display Panel
Touch Control Panel And Remote Display Panel
/
Product Overview
9
5
1
2
13
11
14
12
10
9
4
3
8
6
7
10
temperature.
7
EN
Before Use
Product Unpacking
Remote Battery Installation
• Unpack all the packaging materials
• Carton box, foams, plastic bag, stickers must be removed.
• Pull out the battery cover at the back of remote control ( see Picture 3).
• Pay attention to the battery polarity, and insert the battery (see Picture 4).
• Put back the battery cover into the remote control.
Use 3V CR2032 Battery
• Keep children away from the packaging since the folded packing and plastic bag
may cause suffocation.
•Check all accessories and documents. Please check the accessories inside the package
according to packing list, contact the shop from which you purchased if anything is
missing.
Remote Control
Picture 3
Picture 4Battery
CAUTION
WARNING
8
Before Use
Positioning
Operation Condition
• Place the unit in an upright position
• On a stable and flat surface. Carpet or futon is a very unstable place. Do not place above floor
level such as on table.
• Enough space around the unit. Recommended space: Side 90 cm or more; Filter side 90cm or
more; Behind 90cm or more; Front 90cm or more)
• Avoid place in direct sunlight
• Any electric machine in the same space, if there is noise or cannot display correct time, move the
product as far as possible from other electric machine.
Operation ambient temperature -5℃ - 35℃
(Heating Mode).
• Operation ambient humidity RH﹪ < 85﹪
(When 25℃).
• 220V ac power supply only.
• Plugging Power plug into power socket.
-”BiBi” Sounds indicate connect to power
source.
-Only Power indicator light up in the control
panel.
-All keys are no response, except “POWER”
key.
-Press “POWER” to start the machine.
Do not use in the following places
• Directly sunshine
• Outdoor
•Narrow space environment such as inside
cabinet
•With a lot of steam or oil such as kitchen
• Wet place such as bathroom
Do not use the product in
below area
- With a lot of chemicals are used such as
factory, hospital, laboratories
- With a lot of flammable gas or oil
- With a lot of steam or oil such as kitchen
- With a lot of sulfide gas such as hot spring
- With high humidity or wet place such as
bathroom
Behind 90cm
or more
Front 90cm
or more
Filter side 90cm
or more
Side 90 cm
or more
CAUTION
WARNING
Inhaltsverzeichnis
Andere Whirlpool Heizung Handbücher
Beliebte Heizung Handbücher anderer Marken
Empire Heating Systems
Empire Heating Systems WCC65 Bedienungsanleitung
Wetekom
Wetekom 92 86 43 Bedienungsanleitung
Desa
Desa SPC170-F Bedienungsanleitung
Watlow
Watlow Watrod Electric Tubular Heaters Bedienungsanleitung
Haverland
Haverland ECO-DRY GPS Series Stücklistenhandbuch
Stelpro
Stelpro ASILVC2060 Series Bedienungsanleitung