Whirlpool ADN 213 Bedienungsanleitung

Operating Instruction

ADN 213, ADN 214, ADN 215, ADN 216,

ADN 217, ADN 218, ADN 219, ADN 220

We deliver for you to use the refrigerating devices meeting high quality requirements responding

to world standards. The safety of the product you chose is confirmed by “B” and “CE”

markings.

Please read the present operating instruction carefully. Special attention should be paid to safety

guidelines. Please keep the operating instruction to use it also during the later operation of the

device.

Dear Customers!

Table of Contents:

1. INTRODUCTION.......................................................................................................................3

2. RESPONSIBILITY AND WARRANTIES................................................................................3

3. REMARKS CONCERNING SAFETY AND PROPER OPERATION.....................................4

4. PROPER OPERATION OF THE DEVICE................................................................................5

5. DATA / TECHNICAL FEATURES..........................................................................................6

6. GENERAL DESCRIPTION OF THE DEVICE.........................................................................6

7. PACKAGING AND TRANSPORT ...........................................................................................6

8. INSTALLATION AND EXPLOITATION OF THE DEVICE .................................................7

8.1. INSTRUCTION FOR ELECTRONIC CONTROLLEER...................................................8

9. DEVICE MAINTENANCE......................................................................................................16

10. PRACTICAL SUGGESTIONS ..............................................................................................16

11. RECYCLING THE USED REFRIGERATING DEVICES...................................................16

12. PROPER EXPLOITATION RULES OF REFRIGERATION DEVICE ...............................17

1. INTRODUCTION

Refrigerating devices like: cases, glass cases, tables are designed for storing of previously cooled food

products, to display them and sell them in retail.

Freezer devices, like: cases, tables are designed for storing of previously frozen food products (pork-

butcher’s products, meat, vegetables, fruits), they are not designed for freezing food products.

Structure of the device ensures getting the optimal exploitation parameters for the given type of the

device, on condition of adherence to all the suggestions included in the present instruction. In order to

ensure proper functioning and getting the best possible parameters, the producer suggests the users to get

familiar with operation and maintenance of the device and basic issues concerning operational safety.

Thorough compliance with suggestions of instruction will help to eliminate accidental damage.

2. RESPONSIBILITY AND WARRANTIES

The producer introduces to market the refrigeration devices compliant with safety requirements, not

endangering the safety of people, animals and property provided their correct installation, proper

technical maintenance and operation according to purpose.

The producer places the CE marking on device that confirms the equipment conformity to adequate law

regulations.

The producer warrants proper functioning of the device. Particular warranty conditions are described in

warranty certificate.

The following are not warranted:

damage during transport, during loading and offloading (in such conditions the claims should be

issued to the company transporting the device),

damage or malfunctions caused by the connection or startup that are improper or not compliant with

instruction, lack of maintenance (for example, cleaning the condenser),

damage of electrical equipment, including the engines, caused by drop of voltage,

damage caused by improper maintenance, not compliant with operating instruction,

window panes, bulbs and fluorescent lamps damaged during transport and exploitation of the device,

heating wire fuse

repositioning of the door hinges.

Device repairs during warranty period:

-should be performed by authorized service of the producer;

service performed by unauthorized people results in void of warranty;

-in the report, please include: problem description, device type, factory number and date of purchase.

The producer provides the user with spare parts for the devices used during at least five years from

production discontinuation.

In order to ensure efficient and safe functioning of the device, you are required to:

use only AUTHORIZED

service,

use only GENUINE spare parts.

3. REMARKS CONCERNING SAFETY AND PROPER OPERATION

The device is designed to be operated by adults only. The child play in the vicinity of the working device

is inadmissible, all the more using the device in operation to play.

Advice for the user:

−

after receiving the device, check its technical condition and equipment according to the operating

instruction; report possible damage to the seller within 24 hours;

−

level the device in the operating place, if it is wheeled, block the brakes;

−

maintain the device in good technical condition;

−

the products to be stored or exposed in refrigerating device should be placed cooled to storage

temperature;

−

the products to be stored or exposed in freezing device have to be placed in the device frozen to

storage temperature;

−

do not overload the device, i.e. watch the load to be compliant with technical data, watch the

admissible payload of shelves;

−

fill the refrigerating / freezing device interior after its initial cooling;

−

place the products in a way to enable the air circulation in evaporator and inside the device;

−

you should remember to remove water gathering in the condensate container (excluding the devices

equipped with condensate evaporator);

−

clean the device interior with water solution of dish washing liquid, using soft cloth or sponge,

previously switching off the mains.

−

dust the front surface of the condenser every two months, in case of heavier dustiness do it more

frequently;

−

open the door for the shortest possible time;

−

use only the equipment delivered with refrigerating device;

−

in case of placing the cases in a row (especially freezing ones), allow the clearance of minimum 10

centimeters between them. Not allowing such clearance will cause an ice buildup between cases;

−

in case of damage, disconnect mains and call service;

−

the producer suggests training of the personnel operating the device in the range of device operation,

as well as in the range of basic issues of safety and hygiene of work;

−

connect the device to the mains network equipped with efficient equipotential switch system.

It is forbidden to:

−connect the device to mains without ensuring of efficient equipotential switch system,

−store spoiled products,

−place warm products inside working chamber of refrigerating device,

−place unfrozen products to freezing device,

−cover and block the ventilation holes of the device,

−tilt the device more than 45°, but if it was necessary, wait about 1 hour before starting the device,

allowing the compressor oil to flow down,

−store delicatessen products without packaging for more than 3 days,

−store the products causing accelerated corrosion process (acids, bases),

−lift and transport the refrigerator counters holding them by plastic edges,

−place the shelves in drafts,

−place the devices near heat sources.

−in devices, the interior of which is finished with aluminum it is forbidden to store food products

of acidic character. Use only the devices made of acid-resistant steel for this purpose.

4. PROPER OPERATION OF THE DEVICE

Refrigerating devices can be exploited in a ventilated room in the following environment temperature

ranges:

refrigerator and freezer cases solid door from +16 to +43°C and relative humidity not exceeding 60%,

refrigerator and freezer cases glass door from +16 to +32°C and relative humidity not exceeding 60%,

refrigerator and freezer tables from +16 to +32°C and relative humidity not exceeding 60%,

To assure the best working conditions for the device, the user should locate the device in the coldest place

of the room. The device should not be exposed to direct operation of sunlight, precipitation; it should not

be located near heat sources (heaters, heating walls, etc.).

It is recommended to:

−have a proper ventilation in the room,

−have a minimum 50 centimeters clearance between highest point of device and ceiling of the

room,

−place the refrigeration device at least 10 centimeters from the wall of the room.

Device in operation generates heat, to enable its dissipation air circulation and ventilation should be

provided.

Installation of the device in the room not meeting the above requirements voids warranty.

Refrigeration devices are equipped with electronic controllers, providing optimal utilization of properties

of the given type of device. The producer programs the controllers based on thorough type research held

and opinions of the users. Still, there are occurrences when it is necessary to reprogram the controller

based on individual user requirements, like for example room humidity too high or very intensive rotation

of products. Such cases are to be agreed with the producer before the purchase of the device. Controller

settings are divided into two groups:

-accessible for user

-accessible for service (change of these parameters can be performed only by consent of the producer).

The operation of the device is fully automated. The producer sets the parameters of electronic thermostat

in a way to provide the user with possibility to regulate the temperature range of the interior (regulated by

the user), as well as effective evaporator defrosting and condensate removal. The way of setting of the

desired temperature is given in the appendix to the present instruction, for the used temperature regulator,

respectively. Eventual change of system parameters accessible for service can be performed only by

consent of the producer.

All controllers used by the producer have the option of manual defrosting available to user, if there is a

need of additional defrosting of the evaporator caused by hard operation conditions of the device. The

behavior of the device is the same with manual and automatic defrosting.

5. DATA / TECHNICAL FEATURES

Tables enclosed.

6. GENERAL DESCRIPTION OF THE DEVICE

1. Refrigerator cases (full door) are designed for short-term storing of food products, like: foiled dairy

and pork-butcher’s products etc., and glass cases (paned door) for storing and exposing of food

products like: foiled dairy and pork-butcher’s products etc.

2. Freezer cases are designed for storing of frozen food products, like: dairy and pork-butcher’s

products, meat, vegetables and fruits (they are not used for freezing).

3. Refrigeration tables are designed for short-term storing of foiled food products, like: dairy and pork-

butcher’s products, salads etc., as well as beverages and processed food.

Freezer tables for storing of food products as above, previously frozen.

4. Two-temperature cases. Freezer part (lower chamber) is designed for storing of frozen food products,

like: dairy, pork-butcher’s products, meat, vegetables and fruits.

Refrigeration part (upper chamber) ) is designed for short-term storing of foiled products, like: dairy,

pork-butcher’s products, salads, etc. as well as beverages and processed food.

7. PACKAGING AND TRANSPORT

The producer sends the device with a transport pallet, protected with foil cover at minimum. The device

should be transported in working position, protected against displacement.

ATTENTION!! During transport and relocation, do not tilt the device more than 45°, because this

can cause damage to the compressor.

A fork lift truck or a transpallet should be used to lift and move the packed product, paying

particular attention that the weight is evenly balanced to prevent the risk of tipping over (avoid

excessive tilting)

ATTENTION: as weight is concentrated on the top part of the appliance, avoid pulling at it during

handing (danger of tipping the appliance over and damaging the feet).

The packaging consists of cardboard and a wooden pallet. The appliance is secured to the pallet by

4 special slots.

A set of symbols are printed on the cardboard packaging according to international standards,

giving indications which should be observed during loading and unloading ,handling and storage of

the appliances.

These symbols are sketched as follows:

Unpacking Instructions

•Any damage should be immediately reported to the carrier.

•The appliance should be unpacked immediately to check that it is intact and has suffered no

damage during transport.

•Do not cut the cardboard with sharp tools to avoid damaging the underlying steel panels.

•Lift the cardboard packaging up and off the appliance.

•After having placed the appliance in its final position of installation, remove the wooden

base block.

•Level the appliance by tightening or unscrewing or unscrewing the bottom part of the feet.

•Connect it and leave it switched-on for a certain period (at lest some hours) before checking

its functioning. During the transport it is possible that some lubricating oil of the

compressor has come into the refrigeration circuit obstructing the capillary: consequentely

the appliance will work for some time not cooling till oil has returned into the compressor.

•Remove the PVC protective film from the interior and exterior walls, avoiding the use of

metal tools.

8. INSTALLATION AND EXPLOITATION OF THE DEVICE

1. It is not allowed to switch the device on without efficient equipotential switch system!!! The

device is equipped with protective PE cord.

2. Before connecting mains to the device, check the voltage conformity between device and network

(data on rating plate).

3. Connecting the device to electrical network should be done in such a way that the plug is visible and

easily accessible for service.

It is inadmissible to use extensions and branch-joints!!!

4. The device should be powered from separate low-voltage circuit equipped with protective cord and

protected with fuse up to 10 A (shelves up to 16A).

5. Before commencing any maintenance or cleaning activities, switch the device off, and then remove

the plug from power outlet.

The device is started by inserting the plug into power outlet and then switching the power on. The

lighting of the switch signals the device in operation.

In low-temperature devices the door frame heater and condensate outlet heater are powered with safe

voltage 24V. Eventual repairs of electrical installation and replacement of power cord can be done only

by certified electrician.

WARNING!!

Loading the products to be

stored in the refrigerator in

the wrong way can cause the

appliance to malfunction.

8.1. INSTRUCTION FOR ELECTRONIC CONTROLLEER

USER INTERFACE

The user has a display and four keys for controlling status and programming of the instrument.

At start-up the instrument performs a Lamp Test; for few seconds the display and the leds blink, in order

to verify their integrity and correct operation. The instrument has two main menus: the “Machine

Status” and “Programming” menu.

ACCESSING AND USING MENUS

Resources are arranged in a menu, which can be accessed by pressing and quickly releasing the “set” key

(“Machine Status” menu) or by holding down the “set” key for more than 5 seconds (“Programming”

menu). To access the contents of each folder, indicated by the relevant label, just press the

“set” key once. You can now scroll through the contents of each folder, modify it or use its functions. If

you do not use the keyboard for over 15 seconds (time-out) or if you press the “fnc” key once, the last

value shown on the display is confirmed and you return to the previous screen mask.

MACHINE STATUS MENU

To access the “Machine Status” menu Press and quickly release the “set” key. If alarms are not present,

the label “SEt” appears. By using the “UP” and “DOWN” keys you can scroll through the other folders

in the menu:

-Pb1: probe 1 value folder;

-Pb2: probe 2 value folder

-SEt: Setpoint setting folder.

Set Setting

Access the “Machine Status” menu by pressing and quickly releasing the “set” key. The label of the “SEt”

folder appears. To display the Setpoint value press the “set” key again. The value appears on the display.

To change the Setpoint value, use the “UP” and “DOWN” keys within 15 seconds. If the parameter is

LOC = y the Setpoint cannot be changed.

Alarm on

If alarm condition exists, when accessing The “Machine Status” menu the “AL” folder label appears (see

the “Diagnostics” section).

Displaying Probes

By pressing the “set” key when the appropriate label appears, the value of the probe associated to it is

displayed.

Andere Handbücher für ADN 213

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whirlpool Kühlschrank Handbücher

Whirlpool

Whirlpool WRT313CZLZ Bedienungsanleitung

Whirlpool

Whirlpool RT25BK Montageanleitung

Whirlpool

Whirlpool ET4WSKYS Gebrauchsanweisung

Whirlpool

Whirlpool W55VM 1100 W Bedienungsanleitung

Whirlpool

Whirlpool WRT318FZDB Montageanleitung

Whirlpool

Whirlpool W10359303A Bedienungsanleitung

Whirlpool

Whirlpool Gold GS5DHAXVY Bedienungsanleitung

Whirlpool

Whirlpool WRS342FIAB Bedienungsanleitung

Whirlpool

Whirlpool ET1MHKXM Bedienungsanleitung

Whirlpool

Whirlpool Referigerator Bedienungsanleitung

Whirlpool

Whirlpool 8W8TXDGFXT00 Bedienungsanleitung

Whirlpool

Whirlpool ED5FVGXSS04 Bedienungsanleitung

Whirlpool

Whirlpool ED2FHEXT - 21.8 cu. ft. Refrigerator Bedienungsanleitung

Whirlpool

Whirlpool GI7FVCXWA Bottom Bedienungsanleitung

Whirlpool

Whirlpool ED2VHGXMB01 Bedienungsanleitung

Whirlpool

Whirlpool ED22MK Bedienungsanleitung

Whirlpool

Whirlpool W5TXEWFWB - 15 cu. Ft. Refrigerator Montageanleitung

Whirlpool

Whirlpool W55TM 4110 W Bedienungsanleitung

Whirlpool

Whirlpool 6ED2FHKXKQ Bedienungsanleitung

Whirlpool

Whirlpool GS6NHAXVQ - 25 Cubic Foot Qualified Refrige Fehlerbehebungshandbuch

Whirlpool

Whirlpool 3ED20PK Bedienungsanleitung

Whirlpool

Whirlpool GB2SHTXTS - Fridge Bottom Mount Bedienungsanleitung

Whirlpool

Whirlpool ER8MHKXRB Bedienungsanleitung

Whirlpool

Whirlpool 5622 Kurzanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung