Whirlpool ED20PK ED22PK Bedienungsanleitung

NO-FROST

REFRIGERATOR-

FREEZER

Model ED20PK

Please read this

Use and Care Guide

before you do anything else...

This booklet tells you how to start your

refrigerator, clean It, move shelves and adJust

controls. It even tells you what new sounds to

expect from your retrlgerator.

Treat your new refrigerator with care. Use it

only to do what home refrigerators are designed

to do.

Parts and features

FREEZER

CONTROL

FREEZER/

LIGHT Y

MODELAND

SERIALNUMBER

OMPARTMENT

ADJUSTABLE

LASSSHELVES

ADJUSTABLE

FREEZER

SHELVES

ICE

CRISPERCOVER

/ STATIONARY

DOOR

SHELVES

MEATDRAWER

AIR CONTROL

(on slde wall)

MEAT DRAWER

Thank you for buying a Whirlpool appliance. Please complete and mall the Owner Reglstra-

tlon Card provlded wlth this product.

Then complete the form below. Have this information ready

if you need service or call with a question.

Copy Model and Serial Numbers from plate

(see diagram above) and purchase date Model Number

from sales slip.

Keep this book and sales slip together in a

Serial Number

handy place.

Purchase Date

Service Company Phone Number

Contents

IMPORTANT SAFETYINSTRUCTIONS

BEFOREUSING YOUR REFRIGERATOR

Remove Sales Label

Clean It

Plug ltln

Install Properly

Level Refrigerator-Freezer

USING YOUR REFRIGERATOR . .

Setting the Controls

Changing the Control Settings

Exterior Moisture Control . . . . . . . .

Adjusting the Refrigerator Shelves . .

Removing the Crisper, Meat Drawer

and Covers . . . . . . . . . . . . . . . . . . .

Adjusting Meat Drawer

Temperature .

Removing Freezer Bin

Page

Removing and Adjusting the

Freezer Shelves ..................... 7

Changing the Light Bulbs ............ 7

Optional Automatic Ice Maker ....... 7

Ice Cube Trays ...................... 8

Removing the Base Grille ............ 8

Sounds You May Hear ............... 8

Energy Saving Tips .................. 9

CLEANING YOUR REFRIGERATOR....... 9

Cleaning Chart ..................... 10

FOOD STORAGEGUIDE ................

Storing Fresh Food ................... 11

Storing Frozen Food ................. 12

VACATION AND MOVING CARE. .......

IFYOU NEEDSERVICEOR ASSISTANCE .

WHIRLPOOL REFRIGERATOR

WARRANTY ............................ 20

01989 Whirlpool Corporation

IMPORTANT

SAFETY INSTRUCTIONS

refrigerator, follow basic precautions including the following:

l Read all instructions before using It is your responsibility to be sure your

the refrigerator. refrigerator:

l Child entrapment and suffocation are not l

is installed and leveled on a floor that will

problems of the past. Junked or aban-

hold the weight, and in an area suitable for its

doned refrigerators are still dangerous...

size and use.

even if they will “just sit in the garage a l

is connected only to the right kind of outlet,

few days!’

with the right electrical supply and ground-

If you are getting rid of your old refrigerator,

ing. (Refer to the Electrical Requirements and

do It safely. Please read the enclosed

Grounding Instructions Sheet.]

safety booklet from the Association l

is used only to do what home refrigerators

of Home Appliance Manufacturers. Help

are designed to do.

prevent accidents. l

is not near an oven, radiator or other heat

l Never allow children to operate, play with,

source.

or crawl inside the refrigerator. l

is properly maintained.

l Never clean refrigerator parts with flam- l

is out of the weather.

mable fluids. The fumes can create a fire

hazard or explosion. l

is used in an area where the room tempera-

l K)R YOUR SAFETY.

ture will not fall below 55°F (13°C).

DO NOT STOREOR USEGASOLINE OR OTHER l

is not used by anyone unable to operate

FLAMMABLE VAPORS AND LIQUIDS IN THE

it properly.

VICINITY OF THIS OR ANY OTHERAPPLIANCE. l

is not loaded with food before it has time to

THEFUMESCAN CREATEA FIREHAZARD OR

get properly cold.

EXPLOSION. - SAVETHESEINSTRUCTIONS -

Before using your

refrigerator

1.Removesaleslabels...

Remove the Consumer Buy Guide Label, tape

and any

inside

labels before using the refrigera-

tor.

To remove any remaining glue:

Rub briskly with thumb to make a ball then

remove.

2. Soak area with liquid hand dishwashing de-

tergent before removing glue as described in

step 1.

DO NOT USEsharp Instruments, rubbing alco-

hol, flammable flulds or abrasive cleaners.

These can damage the material. See “lmpor-

tant Satety Instructions” on page 3.

NOTE: DO NOT REMOVE ANY PERMANENT IN-

STRUCTION LABELS INSIDE YOUR REFRIGERATOR.

Do not remove the Tech Sheet fastened under

the refrigerator at the front.

2. Clean it...

Clean your refrigerator before using it. See

cleaning instructions on page 9.

3. Plug it in...

J-PRONG GROUNDING

TYPE WALL RECEPTACLE

REFRIGERAibR 3-PRONG

POWER CORD GROUNDING PLUG

RECOMMENDED GROUNDING METHOD

A 115Volt, 60 Hz., AC only 15 or 20 ampere fused

and properly grounded electrical supply is re-

quired. It is recommended that a separate circuit

sewing only this appliance be provided.

Do not use an extension cord. Use a recepta-

cle which cannot be turned off with a switch or

pull chain.

See Electrical Requirements and

Grounding Instruction Sheet in your Literature

Package.

4. Install properly...

Allow

inch (1.25 cm) space on each side and

at the top of the refrigerator for ease of

installation.

2. If the refrigerator is to be against a wall, you

might want to leave extra space on the hinge

side closest to the wall so the door can be

opened wider.

3. The refrigerator back can be flush against the

wall.

5. Level refrigerator-freezer...

FRONT ROLLER

II I

VELING SCREW

IGHT TO RAISE;

LEFTTO LOWER

Remove base grille. (See page 8.)

2. To raise front, turn screw in direction shown.

3. To lower front, turn screw in direction shown.

Check with level.

5. Replace base grille. (See page 8.1

Using your refrigerator

FREEZERCO/NTROL REFRIGERATOR;ONTROL EXTERIORM&T”RE CONTROL LIGHTSWITCH

Setting the controls...

Controls for the refrigerator and freezer are in the

refrigerator. When the refrigerator is plugged in for

the first time...

Set the REFRIGERA-

TOR CONTROL To 3.

Set the FREEZER

CONTROL TO B.

Give the refrigerator time to cool down com-

pletely before adding food.

(This may take sev-

eral hours.)

These settings should be about right for nor-

mal household refrigerator usage.

The controls will be set about right when milk or

juice is as cold as you like and when ice cream is

firm.

Changing the control settings... l

Adjust the Refrigerator Control first.

If you need to adjust temperatures in refrigerator

Wait at least 24 hours between adjustments.

or freezer, use the settings listed in the chart below.

Then adjust the Freezer Control if needed.

RECOMMENDED

CONDITION: REASON: CONTROL SETTINGS:

If Refrigerator Door opened often Refrigerator 4

Section is Large amount of food added Freezer A

TOO WARM Room temperature too warm

If Freezer Door opened often

Section is Refrigerator 3

Large amount of food added Freezer C

TOO WARM Very cold room temperature

QUESTIONS?

(can’t cycle often enough]

...call your If Refrigerator

COOL-LINE’ Section is Controls not set correctly Refrigerator 2

service for your conditions Freezer B

TOO COLD

assistance

telephone If ICE isn’t Heavy ice usage

MADE FASTENOUGH Refrigerator

number Very cold room temperature Freezer :

(page 16). (can’t cycle often enough)

If BOTH SECTIONS Door opened often 4

are TOO WARM Refrigerator

Large amount of food added Freezer B

Very warm or very cold

room temperatures

Exterior Moisture Control

The

Exterior Moisture Control

on the Control

COnSOk Opt?KYkS

electric

heaters around the I. Use the “OFF” setting when humidity is low.

door openings. These heaters help keep moisture 2. Use the “ON”

setting

if moisture forms on the out-

from forming on the outside of the refrigerator, side of the refrigerator.

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use

To remove glass shelves:

your refrigerator. Glass shelves are strong enough

to hold botties, milk and other heavy food items.

Tilt up at front.

2. Lift up at back.

GLASS SHELVES ARE

HEAVY. BE CAREFUL

3. Pull shelf straight out.

To replace glass shelves:

1. Guide the rear hooks into the slots in the shelf

supports.

2. Tilt up front of shelf until hooks drop into slot.

Lower front of shelf to level position.

Removing the crispeq meat drawer and covers...

To remove lhe crisper and meat drawer:

Slide crisper and meat drawer straight out to the

stop, lift drawer, then slide the rest of the way out.

2. Replace in reverse order.

To remove the covers:

Push up crisper cover glass insert from bottom,

then slide out with both hands.

2. Lift front of cover frame.

3. Lift out cover frame by pulling up and out.

4. Repeat for meat drawer cover.

To replace the covers:

Fit back of meat drawer cover in notch supports

on walls of refrigerator, then lower into place.

2. Repeat for crisper cover frame.

3. Slide back of crisper cover glass insert into

place, then lower front.

II I

PULL OUT TO THE STOP,

REMOVE THE

GLASS INSERT,

Lln THE FRAME FRONT,

Llm THE FRONT

GLASS IS HEAVY

BE CAREFUL.

Adjusting meat drawer temperature...

USE CONTROL TO ADJUST

Cold air flows against the meat drawer through

MEAT DRAWER TEMPERATURES

an opening between the freezer and the refrigera-

tor. This helps keep the meat drawer colder than

the rest of the refrigerator.

Slide the control to let more or less cold air

through.

Removing freezer bin...

For proper air movement, keep the freezer bin in

place when the refrigerator is operating.

To remove the bin:

Slide bin out to the stop.

2. Lift the front to clear the stop.

3. Slide out the rest of the way.

To replace lhe bin:

Place bin on the slides.

2. Make sure the stops clear the front of the slides.

3. Slide bin in.

Removing and adjusting the freezer shelves...

To remove the shelf:

Liff right side of shelf off supports.

2. Slide shelf out of shelf support holes.

3. Replace in reverse order.

To adjust the shelf:

Remove shelf.

2. Remove supports by sliding upwards.

? track

3. Replace supports on desired level.

4. Replace shelf.

NOTE:The cup shaped supports go in the I

of the freezer.

Changing the light bulbs...

Electrical Shock Hazard

Before removing a light bulb, either unplug the refrigerator or disconnect the electricity

leading to the refrigerator at the main power supply. Shock

and injury can occur if electricity

remains connected.

To change refrigerator light:

Disconnect refrigerator from power supply.

2. Reach behind the control console to find bulb.

3. Remove bulb.

4. Replace with a 40-watt appliance bulb.

5. Reconnect power supply.

To change freezer light:

Disconnect refrigerator from power supply.

2. Grasp front of light shield.

3. Pull bottom of shield forward until it snaps free.

4. Remove bulb.

GRASP LIGHT SHIELD

PULL BOTTOM FORWA

5. Replace with a 40-watt appliance bulb.

6. Press light shield straight on until it snaps into

place.

7. Reconnect power supply.

Optional automatic ice maker...

If You have the automatic ice maker accessory,

or if You plan to add one later (Part No. ECKMF-90)

there are a few things You will want to know:

The ON/OFF lever is a wire signal arm.

Down...for making ice automatically.

UpAo shut off the ice maker.

DO NOT TURN ICE MAKER ON UNTIL IT IS CON-

NECTEDTO THEWATERSUPPLY.

LOWER

SIGNAL

ARM TO

START IT

RAISE

SIGNAL

ARM TO

STOP ICE

The dial or lever on the side of the ice maker

changes the size of the cubes.

Shake the bin occasionally to keep cubes sepa-

rated, and to obtain increased storage capacity.

It is normal for ice crescents to be attached by a

corner. They will break apart easily.

You will hear water running when ice maker is

working. You’ll hear ice fall into the bin. Don’t let

these sounds bother You.

. The ice maker will not operate until the freezer

is cold enough to make ice. This can take

overnight.

. Because of new plumbing connections, the first

ice may be discolored or off-flavored. Discard

the first few batches of ice.

continued on next page

If ice is not being made fast enough and more

ice is needed, turn the Refrigerator Control to-

ward a higher number. Wait a day and, if neces-

sary, turn the Freezer Control toward C.

If you remove the ice bin, raise the signal arm to

shut off the ice maker. When you return the bin,

push it all the way in and lower the arm to the ON

position.

If cubes are stored too long, they may develop

an off-flavor...like stale water. Throw them away

They will be replaced. Cubes in the ice bin can

also become smaller by evaporation.

Good water quality is important for good ice

quality. It is not recommended that the ice maker

be connected to a softened water supply Water

softener chemicals such as salt from a malfunc-

tioning softener can damage the ice maker

mold and lead to poor quality ice. If a softened

water supply cannot be avoided, then it is impor-

tant that the water softener be well maintained

and operating properly

Ice cube trays...

If cubes are not used, they may shrink. The mov-

ing cold air starts a slow evaporation. The longer

cubes are stored, the smaller they get.

F ~~&t”,~both ends.

2. Twist slightly.

Removing the basegrille...

To remove the grille:

Open the doors.

2. Pull grille outward as shown.

Do not remove Tech sheet

fastened behind

grille.

To replace the grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.

3. Close the doors.

Sounds you may hear...

Your new refrigerator may make sounds that your old one didn’t.

Because the sounds are new to you, you might be concerned about them.

Don’t be. Most of the new sounds are normal, Hard surfaces like the floor,

walls and cabinets can make the sounds seem louder.

The following chart describes the kinds of sounds that might be new to

you, and what may be making them.

Poulble Sounds: Probable Causes:

l Slight Hum, Sotl HISS:

l Cllcklng or Snapping

Sounds:

You may hear the refrigerator’s fan motor and moving air.

The thermostat makes a definite click when the refrigeratorstops running.

It also makes a sound when the refrigerator starts. The defrost timer will

click when the defrost cycle starts and stops.

l Water Sounds:

When the refrigerator stops running, you may hear gurgling in the tubing

for a few minutes after it stops. You may also hear defrost water running

into the defrost water pan.

l Ice Maker Sounds:

- trickling water

- thud (clatter of ice)

If your refrigerator has an ice maker you may hear buzzing [from the

water valve], trickling water and the clatter of ice dumped into the bin.

l Running Sounds:

8 Your refrigerator has a high-efficiency compressor and motor. It will run

longer than older designs, It may even seem to run most of the time.

Energy saving tips...

You can help your refrigerator use less electricity.

Check door gaskets for a tight seal. Level the

cabinet to be sure of a good seal.

Clean the condenser coils regularly.

Open the door as few times as possible. Think

about what you need before you open the door.

Get everything ouf at one time. Keep foods orga-

nized so you won’t have to search for what you

want. Close door as soon as food is removed.

Go ahead and fill up the refrigerator, but don’t

over crowd it so air movement is blocked.

It is a waste of electricity to set the refrigerator

and freezer to temperatures colder than they

need to be. If ice cream is firm in the freezer and

drinks are as cold as your family likes them, that’s

cold enough.

Keep the Exterior Moisture Control on the “OFF”

setting unless moisture forms on refrigerator

exterior.

Make sure your refrigerator is not next to a heat

source such as a range, water heater, furnace,

radiator or in direct sunlight.

Cleaning your refrigerator

Both the refrigerator and freezer sections defrost

automatically. But both should be cleaned about

once a month to help prevent odors from building

up. Of course, spills should be wiped up right away.

To clean your refrigerator turn the Refrigerator

Control to OFF, unplug it, take out all removable

parts and clean it according to the following

directions.

continued on next page

Cleaning chart

PART

Removable parts

(shelves, crisper, meat

drawer, etc.)

Outslde

lnslde walls

(Freezer

should be allowed to

warm up so cloth won’t

stick.)

Door liners

and gaskets

Dark plastics

(covers and panels)

WHAT TO USE HOW TO CLEAN

Sponge or cloth; mild

Wash removable parts by hand with

detergent and warm warm water and a mild detergent.

water.

Rinse and dry

Sponge, cloth or paper

Wash with warm water and a mild

towel; mild detergent: detergent.

Do not use abrasive or

appliance wax (or

harsh cleansers.

good auto paste wax).

Rinse and dry

Wax painted metal surfaces at least twice

a year with appliance wax or a good auto

paste wax. Apply wax with a clean, soft

cloth.

Do not use wax on plastic parts.

Waxlng painted metal surfaces provldes rust protection.

Sponge, soft cloth or

Wash with warm water and

paper towel, baking - mild detergent or

soda, warm water, mild

detergent. -baking soda (2 tablespoons [26 g] to

1quart [.95 L.] warm water).

Rinse and dry

Sponge, soft cloth or

Wash with mild detergent and warm

paper towel; mild water.

detergent, warm water.

Rinse and dry.

DO NOT USEcleaning waxes, concentrated detergents, bleaches

or cleansers containing petroleum on plastfc parts.

Mild detergent and

Wash with a soft cloth or sponge.

warm water; soft, clean

sponge or soft, clean

Rinse and dry.

cloth.

Defrost pan

DO NOT USEpaper towels, window sprays, scouring cleansers,

or flammable flulds. These can scratch or damage the material.

See “Important Safety Instructions” on page 3.

Sponge or cloth; mild

Remove base grille. (See page B.]

detergent and warm

water.

To remove defrost pan, lift pan over wire

brace (remove tape, if any).

Wash defrost pan with warm water and

mild detergent.

Rinse and dry

Replace with notched corner to the rear.

Push it all the way in.

Condenser coils

Floor under

retrlgerator

Vacuum cleaner: using

the extended narrow

attachment.

Floor cleaners.

Make sure defrost drain tube is pointing

into pan.

Replace base grille.

Remove base grille.

Clean dust and lint from condenser at

least every other month.

Replace base grille.

Roll refrigerator out only as far as water

supply line allows.

Clean the floor.

Roll refrigerator back.

Check to see if the refrigerator is level.

Andere Handbücher für ED20PK ED22PK

Inhaltsverzeichnis

Andere Whirlpool Kühlschrank Handbücher

Whirlpool

Whirlpool BOTTOM MOUNT REFRIGERATOR GB2SHDXT Benutzerhandbuch

Whirlpool

Whirlpool TOP-MOUNT REFRIGERATOR Bedienungsanleitung

Whirlpool

Whirlpool ET1FTEXV Gebrauchsanweisung

Whirlpool

Whirlpool ET20MK Bedienungsanleitung

Whirlpool

Whirlpool GB9SHKXMQ02 Bedienungsanleitung

Whirlpool

Whirlpool KDDC24RVS Bedienungsanleitung

Whirlpool

Whirlpool W8TXEGFYQ Montageanleitung

Whirlpool

Whirlpool ARC 0700 Bedienungsanleitung

Whirlpool

Whirlpool WRF57R18DM Bedienungsanleitung

Whirlpool

Whirlpool EDI9MT Bedienungsanleitung

Whirlpool

Whirlpool R-92 Bedienungsanleitung

Whirlpool

Whirlpool WRT111SFDB Bedienungsanleitung

Whirlpool

Whirlpool ADN 140W Bedienungsanleitung

Whirlpool

Whirlpool WRS325FDAB Kurzanleitung

Whirlpool

Whirlpool ET16AK Bedienungsanleitung

Whirlpool

Whirlpool GZ25FSRXYY Bedienungsanleitung

Whirlpool

Whirlpool ET8WTEXVQ Montageanleitung

Whirlpool

Whirlpool ET6WSKXSQ01 Bedienungsanleitung

Whirlpool

Whirlpool ETl8JM Bedienungsanleitung

Whirlpool

Whirlpool ED2GTKXNQ00 Bedienungsanleitung

Whirlpool

Whirlpool AGG 902 IX Bedienungsanleitung

Whirlpool

Whirlpool S-04-GNF32E WO Bauanleitung

Whirlpool

Whirlpool REFRIGERATOR Bedienungsanleitung

Whirlpool

Whirlpool WB70E973W Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung