Whirlpool ED25PW Bedienungsanleitung

Exterior

Light Freezer Retrlgerator moisture

Shelf slide

Meat drawer

Model and

serial number

Meat drawer

Base’grille

X ED25PW shown

NO-FROST

REFRIGERATOR-FREEZERS

ED25PW ED22PW

Contents

Page

Important Safety Instructions .........

Before Using Your Refrigerator .......

Using Your Refrigerator. ..............

Setting the controls ...................

Changing the control settings ..........

Exterior moisture control ..............

Adjusting the refrigerator shelves .......

Removing and adjusting the freezer

shelves.. .........................

Removing the freezer door shelves .....

Removing the crisper, meat drawer

andcovers ........................

Adjusting the crisper humidity control ...

Adjusting the meat drawer temperature

Removing the snack bin ...............

Adjusting the shelf glide ...............

Removing the freezer basket ...........

Removing the base grille ..............

Changing the light bulbs ...............

Cold water and ice dispenser ..........

Automatic ice maker ..................

Removing ice maker storage bin ........

Common ice maker problems ..........

Soundsyoumayhear .................

Energy saving tips ....................

Cleaning Your Refrigerator ...........

Food Storage Guide ..................

Storing fresh food ....................

Storing frozen food ...................

Caring For Your Refrigerator. .........

If You Need Service Or Assistance ....

Whirlpool Refrigerator Warranty ......

01991 Whirlpool Corporation

-3

Remove the Consumer Buy Guide Label, tape

and any inside labels before using the refrigerator.

To remove any remaining glue:

Rub briskly with thumb to make a ball, then

remove.

Soak area with liquid hand dishwashing

detergent before removing glue as described

above. Do not use sharp instruments, rubbing

alcohol, flammable fluids or abrasive cleaners:

These can damage the material. See “Important

Safety Instructions” on page 3.

NOTE: Do not remove any permanent instruction

labels inside your refrigerator. Do not remove the

Tech Sheet fastened under the refrigerator at

the front.

Thank you for buying a Whirlpool appliance.

Please complete and mail the Owner Regis-

tration Card provided with this product.

Then complete the form below. Have this informa-

tion ready if you need service or call with a

question.

Copy model and serial numbers from plate

(see diagram on front cover) and purchase date

from sales slip.

Keep this book and sales slip together in a

handy place.

Model Number

Serial Number

Purchase Date

Service Company Phone Number

ImportantSafetyInstructions

To reduce the risk of fire, electrical shock, or injury when using your

refrigerator, follow basic precautions including the following:

Read all instructions before using the

refrigerator.

Child entrapment and suffocation

are not problems of the past. Junked

or abandoned refrigerators are still

dangerous...even if they will “just sit

in the garage a few days!’

If you are getting rid of your old

refrigerator, do it safely. Please read

the enclosed safety booklet from

the Association of Home Appliance

Manufacturers. Help prevent accidents.

Never allow children to operate, play

with, or crawl inside the refrigerator.

Never clean refrigerator parts with

flammable fluids. The fumes can create

a fire hazard or explosion.

* FOR YOUR SAFETY.

DO NOT STORE OR USE GASOLINE OR

OTHER FLAMMABLE VAPORS AND LIQ-

UIDS IN THE VICINITY OF THIS OR ANY

OTHER APPLIANCE. THE FUMES CAN

CREATE A FIRE HAZARD OR EXPLOSION.

It is your responsibility to be sure your

refrigerator:

is installed and leveled on a floor that will hold

the weight, and in an area suitable for its size

and use.

is connected only to the proper kind of outlet,

with the correct electrical supply and ground-

ing. (Refer to the Electrical Requirements and

Grounding Instructions Sheet.)

is used only to do what home refrigerators are

designed to do.

is not near an oven, radiator or other heat

source.

is properly maintained.

is out of the weather.

is used in an area where the room tempera-

ture will not fall below 55°F (13°C).

is not used by anyone unable to operate

it properly.

is not loaded with food before it has time to

get properly cold.

- SAVE THESE INSTRUCTIONS -

BeforeUsingYourRefrigerator

3-prong grounding

type wall receptacle

Sprang

groundlng plug

Refrlgerato

power cord

All Right to raise;

Left to lower

Clean it

Clean your refrigerator before using it. See

cleaning instructions on page 14.

Plug it in

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused

and properly grounded electrical supply is

required. It is recommended that a separate circuit

serving only this appliance be provided. Use a re-

ceptacle which cannot be turned off with a switch

or pull chain. Do not use an extension cord.

See Electrical Requirements and Grounding

Instructions Sheet in your Literature Package.

Install properly

1. Allow % inch (1.25 cm) space on each side

and at the top of the refrigerator for ease of

installation.

2. If the refrigerator is to be against a wall, you

might want to leave extra space on the hinge

side so the door can be opened wider.

3. The refrigerator back can be flush against

the wall.

4. Make sure ice maker water supply has been

connected. Refer to Installation Instructions.

Level refrigerator-freezer

1. Remove the base grille. (See page 8.)

2. To raise front, turn screw in direction shown.

3. To lower front, turn screw in direction shown

4. Check with level.

5. Replace base grille. (See page 8.)

Lower

UsingYourRefrigerator

Setting the controls

Controls for the refrigerator and freezer are in the

refrigerator. To adjust a control, reach under the

console and turn the knob. When the refrigerator

is plugged in for the first time:

1. Set the Refrigerator Control to 3.

2. Set the Freezer Control to B.

Give the refrigerator time to cool down completely

before adding food. (This may take several hours.)

These settings should be about right for normal

household refrigerator usage.

The controls will be set about right when milk

or juice is as cold as you like and when ice cream

is firm.

Refrigerator Control adjustments range from

1 to 5. Freezer Control adjustments range from

AtoC.

Changing the control settings

If you need to adjust temperatures in refrigerator or

freezer, use the settings listed in the chart below. If

you have questions, call your COOL-LINE@ serv-

ice assistance number. (See page 18 .)

Adjust the Refngerator Control first.

Wait at least 24 hours between adjustments.

Then adjust the Freezer Control if needed.

CONDITION: REASON:

If Refrigerator Door opened often

Section is Large amount of food added

TOO WARM Room temoerature too warm

RECOMMENDED

CONTROL SETTINGS:

Refrigerator 4

Freezer A

If Freezer

Section is

TOO WARM

If Refrigerator

Section is

TOO COLD

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS

are TOO WARM

Door opened often

Large amount of food added

Very cold room temperature

(can’t cycle often enough)

Controls not set correctly

for your conditions

Refrigerator 3

Freezer C

Refrigerator 2

Freezer B

Heavy ice usage

Very cold room temperature

(can’t cycle often enough)

Door opened often

Large amount of food added

Very warm or very cold room

temperatures

Refrigerator 3

Freezer C

Refrigerator 4

Freezer B

Using Your Refrigerator

Continued

Glass

shelves are

heavy. Be careful.

Exterior moisture control

The Exterior Moisture Control on the Control

Console operates electric heaters around the door

openings. These heaters help keep moisture from

forming on the outside of the refrigerator.

1. Use the OFF setting when humidity is low.

2. Use the ON setting if moisture forms on the

outside of the refrigerator.

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use

your refrigerator. Glass shelves are strong enough

to hold bottles, milk and other heavy food items.

To remove glass shelves:

1. Remove items from shelf.

2. Tilt up at front.

3. Lift up at back.

4. Pull shelf straight out.

To replace glass shelves:

1. Guide the rear hooks into the slots in the

shelf supports.

2. Tilt up front of shelf until hooks drop into slot.

Lower front of shelf to level position.

Removing and adjusting the

freezer shelves

To remove the shelves:

1. Lift right side of shelf off supports.

2. Slide shelf out of shelf support holes.

3. Replace in reverse order.

To adjust the shelves:

1. Remove shelf as above.

2. Remove supports by sliding upward.

3. Relocate supports on desired level.

4. Replace shelf.

NOTE: The cup shaped supports go in the back

of the freezer.

Removing the freezer door shelves

(ED22PW)

Shelves can be removed for easier cleaning.

To remove door shelves:

1. Grasp shelf at both ends.

2. Lift up and pull out.

To replace door shelves:

1. Insert shelf hooks into guides on both sides.

2. Push down to lock in place.

..-

Pull

out to the stop,

Remove the

glass insert, I

lift the frame from

then the back. II

Removing the crisper, meat drawer

and covers

To remove the crisper or meat drawer:

1. Slide straight out to the stop.

2. Lift the front.

3. Slide out the rest of the way.

4. Replace in reverse order.

To remove the covers:

1. Push up glass insert from bottom, then slide

out with both hands.

2. Lift front of cover frame.

3. Lift out cover frame by pulling up and out.

4. Remove metal support cover.

To replace the covers:

1. Replace metal cover support on wall supports

in front section of cabinet.

2. Fit back oi corner into notch supports on walls

of refrigerator, then lower into place.

3. Slide back of glass insert into place, then

lower front.

Adjusting the crisper humidity control

You can control the amount of humidity in the

moisture-sealed crisper.

1. The control can be adjusted to any setting

between LOW and HIGH.

2. LOW (open) lets moist air out of the crisper for

best storage of fruits and vegetables with skins.

3. HIGH (closed) keeps moist air in the crisper for

best storage of fresh leafy vegetables.

Adjusting the meat drawer temperature

Cold air flows against the meat drawer through an

opening between the freezer and the refrigerator.

This helps keep the meat drawer colder than the

rest of the refrigerator.

Slide the control to let more or less cold air

through.

Using Your Refrigerator

Continued

Removing the snack bin (ED25PW)

To remove the snack bin:

1. Slide snack bin with an even, constant motion

straight out to the stop.

2. Lift the front.

3. Slide bin out the rest of the way.

4. Replace in reverse order.

Pull

out to the stop,

lift the front and

pull again.

IiIII

Meta! clips

Adjusting the shelf glide

The shelf glides can be used to secure odd

shaped items or to separate other items.

1. Grasp glide.

2. Slide glide along guide.

Shelf glide cannot be removed.

Removing the freezer basket

(Wire for ED25PW and plastic for ED22PW)

For proper air movement, keep the freezer basket

in place when the refrigerator is operating.

To remove the basket:

1. Slide the basket out to the stop.

2. Lift front to clear the stop.

3. Slide out the rest of the way.

To replace the basket:

1. Place basket on the slides.

2. Make sure the stops clear the front of the slides.

3. Slide basket in.

Removing the base grille

To remove the grille:

1. Open the doors.

2. Pull grille out.

3. Do not remove Tech Sheet fastened

behind grille.

To replace the grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.

3. Close the doors.

See cleaning instructions for defrost pan and

condenser coils on page 14.

defrost pan

Changing the light bulbs

Electrical Shock Hazard

Before removing a light bulb, either unplug

the refrigerator or disconnect the electricity

leading to the refrigerator at the main power

supply. Failure to do so could result in

electrical shock or personal injury.

To change the refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Console to find bulb.

3. Remove bulb.

4. Replace with a 40-watt tubular appliance bulb.

5. Reconnect power supply.

To change crisper light:

1. Disconnect refrigerator from power supply.

2. Pull top of light shield forward until it snaps free.

3. Lower light shield to clear bottom supports.

4. Pull light shield straight out to remove.

5. Replace with a 40-watt appliance bulb.

6. Replace light shield in reverse order.

7. Reconnect power supply.

To change upper freezer light

(ED25PW only):

1. Disconnect refrigerator from power supply.

2. Lift top of light shield up and pull shield out.

3. Replace bulb with a 40-watt appliance bulb.

4. Place shield over bulb and snap into place.

5. Reconnect power supply.

To change light below ice bin:

1. Disconnect refrigerator from power supply.

2. Push in sides of light shield until it snaps free.

3. Replace bulb with a 40-watt appliance bulb.

4. Replace the light shield.

5. Reconnect power supply.

To change dispenser light:

1. Disconnect refrigerator from power supply.

2. Reach the bulb through the dispenser area.

3. Replace with a heavy-duty IO-watt bulb.

4. Reconnect power supply.

NOTE: Not all commercial appliance bulbs will fit

your refrigerator. Be sure to replace bulb with one

of the same size and shape.

Using Your Refrigerator

Continued

Cold water and ice dispenser

Personal Injury Hazard

Tumbling ice and pressure on a fragile glass

can break it. Do not use a fragile glass when

dispensing ice or water. Failure to do so

could result in personal injury or breakage.

To dispense ice:

Press a sturdy glass against the ice dispenser

bar. Hold glass close to dispenser opening so

ice does not fall outside of glass.

2. Remove the glass to stop dispensing.

NOTE: The first few batches of ice may have an

off taste from new plumbing and parts. Throw the

ice away.

Ice is dispensed from the ice maker storage bin

in the freezer. When the dispenser bar is pressed,

a trapdoor opens in a chute between the

dispenser and the ice bin. Ice is moved from the

bin and falls through the chute. When the dis-

penser bar is released, a buzzing sound may be

heard for a few seconds as the trapdoor closes.

The dispensing system will not operate when

the freezer door is open.

NOTE: Large amounts of ice should be taken from

the bin, not through the dispenser.

To dispense water:

1. Press a sturdy glass against the water

dispenser bar.

2. Remove the glass to stop dispensing.

NOTE: Dispense enough water every week to

maintain a fresh supply.

Chilled water comes from a tank behind the meat

drawer:lt holds about 1’/2quarts (1.5 L).

When the refrigerator is first hooked up, press

the water dispenser with a glass or jar until you

have drawn and discarded 2 or 3 quarts (1.9 to

2.8 L). The water you draw and discard will rinse

the tank and pipes.

Allow several hours to chill the first tankful.

NOTE: The small tray beneath the dispenser is

designed to evaporate small spills. There is no

drain in this tray. Do not pour water into it.

Andere Handbücher für ED25PW

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whirlpool Kühlschrank Handbücher

Whirlpool

Whirlpool EDISSC Bedienungsanleitung

Whirlpool

Whirlpool WTH4714 A+M Bedienungsanleitung

Whirlpool

Whirlpool WSF26D2EXY02 Bedienungsanleitung

Whirlpool

Whirlpool ET8WTKXKB - 18 cu. Ft. Refrigerator Montageanleitung

Whirlpool

Whirlpool ET1MHKXMB05 Bedienungsanleitung

Whirlpool

Whirlpool GI6SDRXXQ Fehlerbehebungshandbuch

Whirlpool

Whirlpool REFRIGERATOR Bedienungsanleitung

Whirlpool

Whirlpool ED19AK Bedienungsanleitung

Whirlpool

Whirlpool WF179 Bedienungsanleitung

Whirlpool

Whirlpool ET8CHMXKQ04 Bedienungsanleitung

Whirlpool

Whirlpool ED2KHAXVB - 22 Cubic Foot 2008 Si Montageanleitung

Whirlpool

Whirlpool GC3NHAXVS - Side-By-Side Refrigerator Bedienungsanleitung

Whirlpool

Whirlpool UC 148 A Bedienungsanleitung

Whirlpool

Whirlpool W10346247A Bedienungsanleitung

Whirlpool

Whirlpool ET1FHTXM Gebrauchsanweisung

Whirlpool

Whirlpool GSC25C4EYW Bedienungsanleitung

Whirlpool

Whirlpool WRT111SFA Gebrauchsanweisung

Whirlpool

Whirlpool 3X S20D RCB 20 Bedienungsanleitung

Whirlpool

Whirlpool W8TXEWFYB Montageanleitung

Whirlpool

Whirlpool WH46TS3E Bedienungsanleitung

Whirlpool

Whirlpool 20RI-D3 SF Bedienungsanleitung

Whirlpool

Whirlpool ET1 8MK Bedienungsanleitung

Whirlpool

Whirlpool WBC3546 A+NFCW Abmessungen

Whirlpool

Whirlpool WSR57R18DM Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung