Whirlpool WWI206 Bedienungsanleitung

Whirlpool Customer Service

Service Manual

Model: WWI206

Contents

1、Precautions ------------------------------2

2、Specifications ---------------------------3

3、Installation -------------------------------4

4、Washing program ---------------------6

5、Wiring Diagrams ------------------------7

6、Trouble shooting ------------------------8

7、Exploded Views -------------------------15

8、Parts list ----------------------------------17

FullyAutomatically Washing Machine

This

documentation is onl

intended for

ualified technicians who are aware of the res

ective

safety regulations.

1.Precautions

When performing trouble-shorting and part replacement during service operation, be sure to

note the following precautions for safety reasons.

1-1.Safety Precautions

1-1-1.Do not use Non-genuine parts

The components of this washing machine have safety-features such as non-combustibility and voltage

withstanding. Therefore, always use the same parts when replacing parts. In particular, be sure to use

only designated parts in case of major safety parts identified by the marking.

1-1-2.Be sure that the washer is grounded

Connect the grounding wire to the shell plate, and lay it into earth of over 25cm in depth or ground it

to the power receptacle equipped with ground terminal.

* Never ground it to the telephone line , lightning rod or gas pipe.

1-1-3. Servicing precautions

After servicing , check to see that the screws, parts, and wiring are installed in their original

Positions, and check the installation between the external metals and the stock plug. In addition, place

The washing machine in a level position to prevent vibration and noise during operation.

1-1-4.Precautions in operation

* During spinning , don’t put your hand in the spin basket. Because the spin basket is roating at high

speed, roating parts may injure your hand.

* Put your laundry into the washer evenly. Because uneven laundry may cause noise or vibration.

* Before washing, check all pockets. If nails or pins remain in pockets, they may damage the washer or

clothes.

* Don’t press the control panel with a sharp object.

* Don’t use excessively hot water.

2.Specifications

Model: WWI206

2-1 Detention

Height

54.9

Width 53.7 cm

Depth 88 cm

2-2 Weight

Net weight 35 Kg

2-3 Standard specification

Voltage

220 　10％/60

V/Hz

Load after connection about 0.33 kW

Safety fuse 5 A

2-4 Specification of tub and basket

Rinse 170 rounds/m

Spine 850 rounds/m

Cloths load (maximum) 4.2 dried (maximum) Kg

2-5 Electrical and MotorAccessories

Motor 0.33 KW

Capacitor 12 Microfarad

Working voltage 220 V/AC

Force 58.8 Newton

2-6 water level switch

Low water level 26+2 Liter

Middle water level 32+2 Liter

High water level 46+2 Liter

批注:

3-1.Installation

* Open the box and take out the silent base.

* Insert the silent base with smooth face downward and slot it under the back portion of machine.

* Keep silent base intact while machine is operation and after use.

* Find a screw from document pack and screw the silent base into the screw hole on the base of the

machine.

3-2.Position the machine properly

(1) Position the washing machine at solid, the level ground, and the gradient should not exceed 2゜;

(2) Please don’t put the machine on the shelf;

(3) The distance between the machine and walls should be about 2 cms;

(4) When the ground is not smooth, adjust the right front foot spanner of machine;

(5) After adjusting, please push the foot spanner back.

3．3 Water connecting

(1) Open the box and take out the inlet hose;

(2) The following picture shows the method how to connect the inlet hose;

(3) After being lengthened, the whole length of the inlet hose can't exceed 5 meters.

3-4.Connecting the drain hose

(1) Open the box and take out the drain hose;

(2) The highest point of the drain hose can't exceed 8 cms, otherwise it should cause drain breakdown;

(3)Don’t seal up the drain hose to the sewer completely or directly put it into the water, otherwise it

siphon may occured;

(4) After being lengthened, the whole length of the drain hose can't exceed 3 meters.

3.5 Adjusting the direction of drain hose

(1) The method how to adjust the direction of drain hose is showed in the following pictures;

(2) While adjusting the direction of drain hose, revolve the drain hose connected with the drain valve in

order to form the natural angle and avoid inclining the tub ring.

Adjust the direction of drain hose.

zRelease the screw on the water outlet and push it in wards.

zWhen placing the machine lopsided, do not hurt the power cord and

clips.

zPull out the drain hose through the outlet at the bottom of machine.

zRelease the inside spring, push aside and tighten it.

zDismount the hole cover and install it on to the opposite hole.

zTurn the drain hose outlet to the selected direction.

zFix the drain hose with screw.

zTighten the drain hose with the clip provided.

4.Washing Procedure

4-1.Automatic Program

Program Soak

(min) Wash

(min) First

rinse

(min)

Second rinse

(min) Spin Remark

Heavy

3 Achieve ideal washing effect for thicker

and heavily soiled laundry items with

grease, such as Jean and working clothes.

Standard

Clean normal laundry items.

Delicate

For delicate fabrics, such as woolen and

silk

4-2Programs Selection

Program selection

Operation

Set standard (user can set by oneself if needs)

Soak--Wash--Rinse--Spin

Soak to clean stubborn stain

Soak 30 min ,rinse twice

Wash only

Detergent can be used repeatedly

Spin only

For draining water only If 3 times automatic unbalance adjustment

doesn’t correct the unbalance, it will be beep’

to call for manual adjustment.

Wash--rinse

To prevent clothes from crease

Rinse twice , 8 min in total.

Rinse--Spin

Wash and spin only

Rinse once ,3 Min in total.

5.Wiring Diagrams

WWI206

NO. color Starting point End point

L pink PCB Water level switch

K pink PCB Water level switch

J black Motor Power cord (L)

J brown Water inlet valve Power cord (L)

I yellow PCB Lid switch

H blue PCB Water inlet valve

G yellow PCB Lid switch

F white PCB Fuse

E red PCB Motor

D brown PCB Motor

C black Drain motor Power cord (L)

B black Water inlet valve Power cord (L)

A purple PCB Drain motor

6、Trouble Shooting

6－1、No power

NO Check power plug and wire.

Yes

Is the fuse

lown ? Replace

Is e ion

of PCB soft?

th connect

Check and adjust it.

Yes

Power switch is

wrong? Adjust or replace

Check the PCB

Yes

Attention :

When you face such problem, you should check if there is

power in customer's home frist.For example, wire, plug, fuse.

Yes

No power ?

Is there power

supply?

6、Trouble shooting

6－2、Water supply error

Water does not go in

Yes

Is the start/ hold button

ressed?

Open the faucet ,press the button.

Does the valve make

Is there water

supp

Check

Is there foreign

material

Yes

Clean the filter with a toothbrush

Is the connection of valve

ll ri

Is the switch in

pressostat

Is the wire of

pressostat soft?

lace the valve

Connect the wire securely.

Replace the pressostat.

Check the PCB

Yes

No Yes

Yes

6、Trouble shooting

6-3、Water inlet doesn't stop when it gets normal level

Valve make a beep

sound? Replace PCB.

Is the air hose bent or

leak? Repair or replace it.

Is the switch of pressostat

wrong?

Replace pressostat.

Is there foreign material

in valve? Replace

Is there foreign material in

drain valve? Take out of the staff.

Yes

Attention:

,PCB would scan the state of switch of the

pressostat.

Durin

the inlet

rocess . PCB would o

en the

circuit of valve when water reach the normal level,

switch is on.

Inlet doesn't sto

Inhaltsverzeichnis

Andere Whirlpool Waschmaschine Handbücher

Whirlpool

Whirlpool 8182616 Montageanleitung

Whirlpool

Whirlpool AWO/D 41105 Bedienungsanleitung

Whirlpool

Whirlpool Duet WFW9400VE03 Bedienungsanleitung

Whirlpool

Whirlpool 8539782 Bedienungsanleitung

Whirlpool

Whirlpool 2DLSQ8000JQ0 Bedienungsanleitung

Whirlpool

Whirlpool Duet WFW9200SQA12 Fehlerbehebungshandbuch

Whirlpool

Whirlpool WTW5500XW Bedienungsanleitung

Whirlpool

Whirlpool LA9800XT Bedienungsanleitung

Whirlpool

Whirlpool XVP9000TA Stücklistenhandbuch

Whirlpool

Whirlpool 7MWTW1504DQ0 Bedienungsanleitung

Whirlpool

Whirlpool WFW88HEAC Montageanleitung

Whirlpool

Whirlpool WFW86HEBW2 Bedienungsanleitung

Whirlpool

Whirlpool RAM5243A Bedienungsanleitung

Whirlpool

Whirlpool CAE2745FQ0 Bedienungsanleitung

Whirlpool

Whirlpool LA5460XS Bedienungsanleitung

Whirlpool

Whirlpool XWT-608 Bedienungsanleitung

Whirlpool

Whirlpool FFCR80120 Bedienungsanleitung

Whirlpool

Whirlpool WFW86HEBC Montageanleitung

Whirlpool

Whirlpool Cabrio WTW6600SB1 Bedienungsanleitung

Whirlpool

Whirlpool CHW9150 Bedienungsanleitung

Whirlpool

Whirlpool MS872F Bedienungsanleitung

Whirlpool

Whirlpool GCAM2792TQ2 Bedienungsanleitung

Whirlpool

Whirlpool WFW9400SZ - Metallic Water Drop R Duet HTR Ultra... Montageanleitung

Whirlpool

Whirlpool 2DLSQ7533JQ4 Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

Bosch

Bosch WAN2829BSN Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung