DIRECT2-JT2
This product is warranted to be
free of defects in materials or
workmanship to the original
purchaser for a period of 3
years from the date of
purchase. Should warranty
service be required, return the
unit postage paid along with
the original sales receipt to:
Whirlwind Music Dist., Inc.
99 Ling Road
Rochester NY 14612
Whirlwind will, at its option,
repair or replace the unit. This
warranty does not cover
damage resulting from abuse,
unauthorized modifications or
use of the product in
unintended applications.
www.whirlwindusa.com
®
INPUT 1 and 2 (¼” jack X 2)
For input of the signal from the
source. The source may be the
output of any type of musical
instrument or amplifier speaker
output. (WARNING! When connecting to
speaker outputs, the DIRECT-JT does not
supply the proper amplifier load required
by most tube type amplifiers. Do not use a
tube amplifier's speaker output alone with
the Direct2-JT. You must also have a
speaker or appropriate dummy load
connected to avoid possible damage to the
amplifier.)
THRU / COMBINE (¼” jack X 2)
Provides a “Y” connection or “loop
through” from the input when the
COMBINE / THRU button is in the
THRU position. Becomes a second
input that is resistively combined
from the INPUT jack when the
button is in the COMBINE position.
CMBNE / THRU (Button X 2)
Configures the ¼” input jacks as either
dual inputs (CMBNE) or parallel IN and
THRU connections (THRU).
PAD / OFF (Button X 2)
Applies 20dB of input attenuation when
in the PAD position for use with very
“hot” instrument signals or when
connecting the DIRECT-JT to the
speaker output of an amplifier.
OUTPUT (XLR jack X 2)
A male XLR, provides a balanced low
impedance signal for connection to
balanced, low-impedance equipment
(mixing console, workstation, etc.)
LIFT / GND (Button X 2)
Disconnects the ground between the
input(s) and the XLR output when set to
the LIFT position to help eliminate
hum. Ground remains connected when
set to the GND position.
