White Rodgers 1F92W-71 Bedienungsanleitung

OPERATION GUIDE

Multi-stage/Heat Pump Electronic

Digital Thermostat

1F92W-71

WHITE-RODGERS

Operator: Save this booklet for future use!

About Your New Thermostat . . .

Please read this manual thoroughly before operating or programming your thermostat. If you

have questions, contact us at the address shown on the back cover of this manual.

Your new White-Rodgers Digital Multi-stage/Heat Pump Thermostat uses the technology of a

solid-state microcomputer to provide precise time/temperature control. This thermostat offers

you the flexibility to design heating and cooling programs that fit your needs.

In This Guide . . .

Operator: Save this

booklet for future use!

YOUR NEW THERMOSTAT'S

FEATURES........................................... 4

OPERATING YOUR THERMOSTAT ........ 5

PARTS OF THE THERMOSTAT

The Back Of the Thermostat Body

The Display

The Thermostat Buttons

OPERATING FEATURES

PROGRAMMING YOUR

THERMOSTAT ................................... 18

PLANNING FOR YOUR NEEDS

ENTERING YOUR PROGRAM

Set Current Time and Day

Enter Heating Program

Enter Cooling Program

CHECK YOUR PROGRAMMING

QUESTIONS AND ANSWERS ............... 29

YOUR NEW THERMOSTAT’S FEATURES

• Five-day/two-dayprogrammingcapability

• Simultaneous heat and cool program

storage

• Four separate time and temperature set-

tings per 24-hour period

• Up to 3 stages of heat and up to 2 stages

of cool

• Computed Energy Management Recov-

ery (EMR)

• Automatic changeover (operator select-

able)

• Two hour temperature override

• Manual program override (HOLD tem-

perature)

• "Advance Program" button

• Armchair programming capability

• Backlit LCD displays continuous setpoint,

time, and room temperature

• Adjustable cycle times

• 9 volt Energizer®alkaline battery backup

• Compressor long term cycle protection

• Compressor short cycle protection

• Blower delay in the cooling cycle

• Preprogrammed temperature control

• Audio and visual prompting during opera-

tion

• Programmable blower control

• Temperature range 40°to 99°F

•°F/°C convertibility

• Compatible with optional Remote Sensor

• Electric Heat (installer-selectable)

OPERATING YOUR THERMOSTAT

Beforeyoubeginprogrammingyournewther-

mostat,youshouldbefamiliarwithitsfeatures

and with the display and the location and

operationofthethermostat buttons.Theinfor-

mation in this section will help you become

familiar with your thermostat so that you can

easily program it.

Your thermostat consists of two parts: the

thermostat body and the subbase.

Press

SYSTEM

HEAT-OFF-COOL-AUTO

to turn thermostat OFF

before removing or attaching the ther-

mostat body. Equipment damage and/

or personal injury could occur.

CAUTION

The subbase is attached to the wall, but you

can remove the thermostat body for easy pro-

gramming. To remove the thermostat body

from the subbase, grasp the thermostat body

and gently pull it out from the bottom of the

subbase, then pivot up. To attach the thermo-

stat body, line up the four terminal pins on the

upper section of the thermostat back with the

matching connector on the subbase. Insert

these, then gently pivot the thermostat body

downtoconnecttheninepinconnectorsonthe

lower portion of the thermostat back. Gently

push until the snap connectors engage. DO

NOT FORCE OR PRY THE THERMOSTAT,

as this may damage the unit.

PARTS OF THE THERMOSTAT

The Back of the Thermostat Body

Turn the thermostat body over. On the back

are the 9 volt Energizer®alkaline battery and

the option switches.

1. The 9 volt Energizer®alkaline battery pro-

vides power to the thermostat when the

24 VACpowerisinterrupted(forexample,

whenyou remove the thermostat from the

wall for programming). A fresh battery will

maintain the stored program for approxi-

mately one week. If power loss is long

enough for the program to be lost, the

thermostat will automatically maintain a

factory preprogrammed heating tempera-

ture of 64°F and a cooling temperature of

82°F after power is restored. You must

reprogram the thermostat if this happens.

If the word BAT is flashing in the display

window, the battery is low and should be

replaced with a fresh 9 volt Energizer®

alkaline battery. The battery will provide

power for all functions except the display

lightandaudioprompting,whichworkonly

on 24 VAC power. If the word BAT is

displayedcontinuously(non-flashing),the

thermostat is not being supplied with

24 VAC power and is being powered by

the battery alone.

Press

SYSTEM

HEAT-OFF-COOL-AUTO

to turn thermostat OFF

before removing thermostat from the

wall to replace the battery.

2. You may adjust option switch #4 for auto-

matic changeover from heating to cooling

(see OPERATING FEATURES).

CAUTION

BACK OF THERMOSTAT BODY

Option switches 9-pin connector

4-pin connector Battery

W18

Other than and , the buttons are

located behind the thermostat door. To open

the door, use your fingernail in the indentation

at the top center of the door. Pull the door out,

then swing the door down on its hinges.

Following are brief descriptions of the display

and the thermostat buttons.

The Display

1Continuously displays system mode

(HEAT,EMER, OFF,COOL,AUTO,

HOLD).Duringprogramming,theprogram

period is displayed (MOR, DAY, EVE,

NHT).

Alternately displays room temperature (F

denotes degrees Fahrenheit and Cde-

notesdegreesCelsius)andtimeofday (A

denotesAMtimeandPdenotesPMtime).

Displays the setpoint temperature.

5 DAY indicates that the displayed pro-

gram is the weekday program. 2 DAY

indicatesthatthedisplayedprogramisthe

weekend program.

ThewordBATflashesonthedisplaywhen

the 9 volt alkaline battery is weak and

should be replaced. The word BAT will be

displayed continuously (non-flashing)

when the thermostat is operating on bat-

tery power only.

FAN is displayed when the blower is

operatingcontinuously,regardlessofheat-

ing or cooling system cycling. FAN is

displayed during automatic fan operation

(when the blower cycles with the heating

or cooling system).

1 2 3

466

2 DAY 5 DAY

FAN FANBAT

5 DAY FAN

EMER. PUMP

MALF. AUX.

TIME

FWD

SYSTEM

HEAT-OFF-COOL-AUTO

SET

CLOCK VIEW

PRGM HOLD

TEMP

TIME

BACK

FAN

ON - AUTO

SET

DAY RUN

PRGM ADV

PRGM

The Thermostat Buttons and Lights

Sets the system mode (HEATing,

EMERgency backup, OFF, COOLing, or

AUTOmatic changeover [user selectable

feature]).

Selects fan operation (see #6, above).

Thisbuttonisalsousedtoprogramthefan

to run continuously during a program pe-

riod.

Runsdisplayforwardorbackwardthrough

time, day, or anticipation settings during

programming.

10 Used with

TIME

FWD

and

TIME

BACK

to set current

time and day of the week.

Usedduringprogrammingtosetthedayof

the week. Also used with

SET

CLOCK

to enter

anticipation setting mode.

Used to initiate or review thermostat pro-

gramming.

Used to start program operation after pro-

gramming. Also used to return thermostat

to program operation after being in HOLD

mode.

Used to manually override programming

to hold at a selected temperature (when

HOLD is displayed).

Used to advance thermostat program to

the next program period (for example,

from the MOR program to the DAY pro-

gram).

(Blue arrow) Lowers temperature setting

(40°F or 4°C minimum).

Inhaltsverzeichnis

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers 1A11-2 Bedienungsanleitung

White Rodgers

White Rodgers 1F97W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1E78-151 Installationsanleitung

White Rodgers

White Rodgers 1F95-1271 Bedienungsanleitung

White Rodgers

White Rodgers 1F94-71 Bedienungsanleitung

White Rodgers

White Rodgers 700 Bedienungsanleitung

White Rodgers

White Rodgers 1F94W-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F87-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F62-21 Bedienungsanleitung

White Rodgers

White Rodgers 1F97W-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F82-261 Bedienungsanleitung

White Rodgers

White Rodgers 1F97-1277 Bedienungsanleitung

White Rodgers

White Rodgers 1F90 Bedienungsanleitung

White Rodgers

White Rodgers 1F90-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F80-261 Bedienungsanleitung

White Rodgers

White Rodgers EMERSON BLUE 1F98EZ-1421 Bedienungsanleitung

White Rodgers

White Rodgers 1F80-361 Bedienungsanleitung

White Rodgers

White Rodgers UP300 Verdrahtungsschema

White Rodgers

White Rodgers 1F80-261 Bedienungsanleitung

White Rodgers

White Rodgers 1e+78 Bedienungsanleitung

White Rodgers

White Rodgers 1F70 Bedienungsanleitung

White Rodgers

White Rodgers 1F72-151 Kurzanleitung

White Rodgers

White Rodgers UP400 Verdrahtungsschema

White Rodgers

White Rodgers 1C30(W) Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung