White Rodgers COMFORT-SET 90 SERIES Bedienungsanleitung

INTRODUCTION

Thank you for purchasing

your new Comfort-Set®90

Series thermostat. Your new

White-Rodgers Thermostat

uses solid state micro-

computer technology to

provide precise time/tem-

perature control. This ther-

mostat offers the flexibility

to design heating and cooling

programs that fit your needs.

Adaptable to most 24 volt

light commercial forced air,

multistage or heat pump

systems with electric or

fossil fuel auxiliary.

You will find information

about thermostat buttons and

display in the component

section beginning on page 2.

Instructions for optional

Introduction Orientation Configuration Programming Features Index

thermostat configuration

begin on page 4. Program-

ming information begins on

page 7. Descriptions of the

thermostat’s features begin

on page 11.

We have also added thumb

tabs to help you find sections

of the manual.

ORIENTATION

THE THERMOSTAT BUTTONS

See inside front cover for illustration

showing button locations.

1(Blue arrow) Lowers temperature

setting (45°F or 7°C minimum)

2(Red arrow) Raises temperature

setting (99°F or 37°C maximum)

3The multi-color indicator glows:

green for 1st stage, yellow for 2nd stage,

red for emergency heat and flashing

red for malfunction condition in

system.

This button (on top of the cover)

lights the display.

Used to initiate or review thermo-

stat programming or advance to next

program period in programming mode.

Used with TIME

FWD

/TIME

BACK

to set the clock.

Used to adjust the time backward,

or to select the previous menu item.

Used to adjust the time forward, or

to select the next menu item.

Used with TIME

FWD

/TIME

BACK

to set the current day.

Used to advance operation to the

next program period or advance to the

next day in programming mode.

Used to manually override

programming to hold at a selected

temperature.

Used to enter and configure the

VACATION mode.

Selects fan operation (see The

Display

). This button is also used

to program the fan to run continuously

during a program period.

14 Used to set the filter change-out

time, or to reset the filter change timer.

15 Sets the system mode (HEATing,

EMERgency, OFF, COOLing, or

AUTOmatic changeover).

16 Used to adjust the clock one hour

forward or back.

17 Used to start or return to program

operation.

FAN AUTOHRS

CHECK BATTERY STAT SYSTEM

°F

MON

PRG

FAN ON

HEATHEAT

HRS

CHECK BATTERY

°F

MON WED THU FRI SAT SUNTUEWED THU FRI SAT SUNTUE

18 18

19 20 21 21

2324

Figure 1. The Display

THE DISPLAY

18 Displays system mode (HEAT,

EMER, OFF, COOL, AUTO,

HOLD, or VACA). During program-

ming displays the time period

(OCCU, UNOC) being programmed..

In the configuration menu, the menu

item name is shown, one word at a

time (PRGM MODE, EMR, COOL

FAN DELA OFF, etc.).

CHECK STAT appears when the

thermostat detects certain problems

within itself. CHECK SYSTEM

appears when the thermostat detects

certain problems in heating or cooling

the system.

Indicates the length of time

remaining in a temporary hold

condition. Also indicates the length of

time remaining in VACATION mode.

21 Displays FAN ON when the fan is

operating continuously. Displays FAN

AUTO when the fan cycles with the

heating or cooling system. Displays

PRG FAN ON when fan is pro-

grammed to be on during a period.

22 Displays the setpoint temperature.

Alternately displays room

temperature and time of day.

24 Shows the current day of the week.

When programming, shows the day(s)

being programmed.

25 The word HEAT or COOL will

appear above or below the setpoint if

area 18 is needed to display other

information.

Orientation

The configuration menus allow you to

set certain thermostat operating

characteristics to your system or

personal requirements.

To enter the User Configuration menu,

press PROGRAM

RUN

to make sure

the thermostat is in the run program

mode, then press TIME

FWD

and

TIME

BACK

at the same time. The

display will show the first item in the

configuration menu.

The following charts (pages 5 & 6)

describe each item on the menus. Press

TIME

FWD

to move forward to the

next item in the menu or TIME

BACK

to move backward to the previous

item. Set these according to your

personal preference using or

. To enter the Keypad Lock

menu, while in the User Menu, press

and hold TIME

FWD

and TIME

BACK

for at least two seconds.

To exit either menu and return to

normal operation, press PROGRAM

RUN

. To re-enter to the User menu at

any time press PROGRAM

RUN

then press TIME

FWD

and TIME

BACK

at the same time. While in the

menus, if you do not press any buttons

for two minutes, the thermostat will

revert to normal operation.

CONFIGURATION

Step Press Button(s) Displayed Press or to select: COMMENTS Ref

(Factory Default) Page

0 °F

(room temperature) 5 LO to

5 HI

2EMR

(ON) OFF

or ON L

Adjusts temperature display higher or lower.

3(°F) °C

Adjusts temperature display to °F or °C.

4SET FAN

(0) 0 - 6 HRS

5BEEP

(ON) OFF

6HEAT FAST

(OFF) ON

7COOL FAST

(OFF) ON

8TEMP OUT

(OFF) ON

Enables outdoor temperature sensor. Requires

optional remote sensor connected to terminal OT

and remote thermistor probe. Also displays outdoor

temperature if active.

Selects EMR option ON or OFF or L ON.

Set Fan (one shot) option. Set the duration of a

temporary fan option.

Turns keypad beeper ON or OFF.

OFF delays starting second stage for economy.

ON starts second stage earlier with user intervention.

OFF delays starting second stage for economy.

ON starts second stage earlier with user intervention.

TIME

and TIME

FWD

BACK

TIME

FWD

TIME

FWD

TIME

FWD

TIME

FWD

TIME

FWD

TIME

FWD

TIME

FWD

User Menu

Configuration

9FONE (Icon)

(OFF) ON

10 COMP RUN TIME

(00) (Compressor run time

in hours)

Returns to normal operation.

11 AUX RUN TIME

(00) (AUXILIARY run time

in hours)

Telephone RUN program feature. Requires optional

X10 system.

Shows accumulated time compressor has run.

To reset to 00, press and .

Shows accumulated time AUXILIARY has run.

To reset to 00, press and .

PROGRAM

RUN

TIME

FWD

TIME

FWD

TIME

FWD

Step Press Button(s) Displayed Press or to select: COMMENTS Ref

(Factory Default) Page

PART LOCK

(OFF) ON

2LOCK

(OFF) ON

Partial Keypad lockout OFF or ON.

Returns to normal operation.

Total Keypad lockout OFF or ON.

PROGRAM RUN

TIME

and TIME

(hold for two

seconds)

FWD

BACK

TIME FWD

Keypad Lockout Menu (access from User Menu)

User Menu (Continued)

PROGRAMMING

MANUAL OPERATION

Your Comfort-Set®90 Series thermo-

stat can be used to control temperature

manually (without programming). For

manual operation, press

SYSTEM

select HEAT or COOL, then press

PROGRAM

HOLD

. Use or

to set the temperature as

desired.

PROGRAMMED OPERATION

Planning Your Program

The sample schedule (page 9) shows

the factory installed programs for

heating and cooling. The heating and

cooling programs are separate, and

must be programmed individually. To

use the factory program, set the clock

and press PROGRAM

RUN

with the

thermostat

SYSTEM

set to Heat, Cool,

or Auto.

Fill out the blank schedule (page 10)

with the time and temperatures you

want in your program. Fill in every

space for your program.

The same temperature can be repeated

more than once if you do not want the

temperature to change over several

time periods.

Entering Your Program

To Set the Clock:

1. Press PROGRAM

RUN

2. Press SET

TIME

. The display will

show the hour. Use TIME

FWD

TIME

BACK

to set to the current hour

and AM/PM designation.

3. Press SET

TIME

again. The

display will show minutes. Use TIME

FWD

or TIME

BACK

to set to the

current minutes.

4. Press PROGRAM

RUN

To Set the Day:

5. Press SET

DAY

. The display will

indicate a day of the week. Use TIME

FWD

or TIME

BACK

to set to the

current day of the week.

6. Press PROGRAM

RUN

To Set the Program:

7. Press

SYSTEM

to select HEAT (for

heating program) or COOL (for

cooling program).

8. Press PROGRAM

VIEW

one time.

The display will show OCCU and the

settings for time and temperature. The

display will also show MON for

Monday.

9. If you program Monday the first

time you press PROGRAM

VIEW

will be copied to the rest of the week.

To program the other days of the week

press

ADV.

/DAY until you reach the

Programming

day you wish to change and follow

Steps 10, 11 & 12. You can also copy

the program from one day to another.

To copy, press

HOLD

/COPY. The

display will show COPY, and all the

other days of week will be flashing.

Press

HOLD

/COPY again to copy the

day into the rest of the week or press

TIME

FWD

or TIME

BACK

until

you reach the day you want to copy to

and press

HOLD

/COPY.

10.Press TIME

FWD

or TIME

BACK

to set the time on the display as

selected in your HEATING or

COOLING SCHEDULE. Be sure to

check the AM or PM on the display.

11.Press the red or blue

key to adjust the temperature to match

your schedule. If you want the fan ON

continuously during this period, press

FAN

12.Press PROGRAM

VIEW

one time.

OCCU on the display will change to

UNOC. Repeat steps 10 and 11 to

enter time and temperature for this

period.

13.Press PROGRAM

ADV.

to change

MON to TUE and show the OCCU

time and temperature settings. Repeat

steps 10 through 12 to enter times and

temperatures for this day.

14.Continue through the entire

schedule, entering time and tempera-

ture for each day and period. When

you are satisfied that your program

matches your schedule, press PRO-

GRAM

RUN

. Programming is now

complete for this mode and your

program is running.

15.To program the other mode, repeat

the procedure from step 7.

Dieses Handbuch passt für folgende Modelle

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers 1E56W-444 Bedienungsanleitung

White Rodgers

White Rodgers P150 Bedienungsanleitung

White Rodgers

White Rodgers 750 Bedienungsanleitung

White Rodgers

White Rodgers 7904 Bedienungsanleitung

White Rodgers

White Rodgers 1f86-244 Bedienungsanleitung

White Rodgers

White Rodgers 1F82-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F85-277 Bedienungsanleitung

White Rodgers

White Rodgers 1F83-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F57-306 Bedienungsanleitung

White Rodgers

White Rodgers M30 Bedienungsanleitung

White Rodgers

White Rodgers 1F82-0261 Bedienungsanleitung

White Rodgers

White Rodgers 1G66 Bedienungsanleitung

White Rodgers

White Rodgers 1F80-51 Bedienungsanleitung

White Rodgers

White Rodgers 90 SERIES 1F95-391 Bedienungsanleitung

White Rodgers

White Rodgers 1F97-0671 Bedienungsanleitung

White Rodgers

White Rodgers 1A65W Bedienungsanleitung

White Rodgers

White Rodgers 1F95-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F81-261 Bedienungsanleitung

White Rodgers

White Rodgers 1E78 Bedienungsanleitung

White Rodgers

White Rodgers 500 Bedienungsanleitung

White Rodgers

White Rodgers 1F80ST-0471 Bedienungsanleitung

White Rodgers

White Rodgers UP400 Verdrahtungsschema

White Rodgers

White Rodgers 1C30(W) Bedienungsanleitung

White Rodgers

White Rodgers IF73 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung