White Rodgers F95-391 Bedienungsanleitung

Thermostat With Humidity Control

Digital 7-Day Programmable

90 SeriesTM

P R E M I U M

1F95-391

Operating Instru tions

Retain for Future Use

WHITE-RODGERS

Premium options

to ustomize the thermostat

to fit your appli ation.

Easy, Menu-Driven Set-Up

and Programming 765432

17 16 15 14 13

Introduction Configuration Troubleshooting

Programming Features FAQs Index

THE THERMOSTAT BUTTONS

See inside front cover for illustration

showing button locations.

(Blue arrow) owers temperature

setting (45°F or 7°C minimum)

(Red arrow) Raises temperature

setting (99°F or 37°C maximum)

The multi-color indicator glows:

green for 1st stage, yellow for 2nd stage,

flashing yellow for 3rd stage, red for

emergency heat and flashing red for

malfunction condition in system.

4 This button (on top of the cover)

lights the display.

5 Used to initiate or review

thermostat programming or advance to

next program period in programming

mode.

6 Used with TIME

FWD

/TIME

BACK

to set the clock.

7 Used to adjust the time backward,

or to select the previous menu item.

8 Used to adjust the time forward, or

to select the next menu item.

9 Used with TIME

FWD

/TIME

BACK

to set the current day.

10 Used to advance operation to the

next program period or advance to the

next day in programming mode.

11 Used to manually override

programming to hold at a selected

temperature.

12 Used to view ambient humidity or

modify humidity setting.

ORIENTATION

Selects fan operation (see The

Display page 3). This button is also

used to program the fan to run

continuously during a program period.

Used to enter the service menu to

change or reset humidifier, air filter,

UV bulb, and service timers.

Sets the system mode (HEATing,

EMERgency (Heat Pump models

only) OFF, COOLing, or

AUTOmatic changeover).

16 Used to adjust the clock one hour

forward or back.

17 Used to start or return to program

operation.

LARGE LIGHTED (LCD) DISPLAY

The thermostat display alternately

shows the current time and the current

temperature on the left side. The

display also shows the temperature

you have programmed or set on the

right side of your screen.

1 Display system mode (OFF,

AUTO, HOLD, VACA or HUMD).

During programming displays the time

period (MOR, DAY, EVE, NHT)

being programmed. In the configura-

tion menu, the menu item name is

shown, one word at a time (PRGM

MODE, EMR, COOL FAN DELA

OFF, etc.).

2 CHECK STAT appears when the

thermostat detects certain problems

within itself. CHECK SYSTEM

appears when the themostat detects

certain problems in the heating/cooling

or humidity system.

3 Indicates the length of time

remaining in a temporary hold

condition. Also indicates the length of

time remaining in VACATION mode.

4 Displays FAN ON when the fan is

operating continuously. Displays FAN

AUTO when the fan cycles with the

heating or cooling system.

5 Displays the setpoint temperature.

In HUMD mode, shows humidity

setpoint.

6 Alternately displays room

temperature and time of day. In

HUMD mode, shows actual humidity.

7 Shows the current day of the week.

When programming, shows the day(s)

being programmed.

8 The word HEAT or COOL will

appear above or below the setpoint if

area 1 is needed to display other

information.

FAN AUTOHRS

CHECK STAT SYSTEM

°F

MON

FAN AUTO

HEATHEAT

HRS

CHECK BATTERY

°F

MON WED THU FRI SAT SUNTUEWED THU FRI SAT SUNTUE

1 1

2 3 4

INTRODUCTION

Introduction .....................................................3

Configuration ..............................................4-11

Manual Operation and Programming ......12-17

Features .................................................... 18-26

FAQs ......................................................... 27-30

Troubleshooting ....................................... 31-34

Index ...............................................................35

Use the tabs at the bottom of the page to quickly

locate sections.

Introduction Configuration TroubleshootingProgramming Features FAQs Index

Thank you for purchasing your

new White-Rodgers 90 Series

thermostat with humidity control.

White-Rodgers has been producing

energy saving controls for over 60

years. We have been designing and

producing the White-Rodgers 90

Series family of electronic pro-

grammable thermostats since 1982.

White-Rodgers 90 Series is the

third generation of the electronic

programmable family. We believe

you will find that the White-

Rodgers 90 Series is the most user

friendly and technologically

advanced thermostat and humidity

control available today.

You will find information about

thermostat buttons (page 1) and

display beginning on page 2.

CONFIGURATION

The configuration menu allows you to set thermostat operating characteristics to your system or personal requirements.

To enter the menu, press TIME

FWD

and TIME

BACK

once at the same time. Press TIME

FWD

to advance through the

menu options. Press arrow keys to change options.

Step Press Button(s) Displayed Press or to select: COMMENTS Ref

(Factory Default) Page

0 °F

(0) 5 LO to

5 HI

Adjusts temperature display higher or lower.

2EMR

(ON) OFF ON

ON L

Selects EMR option ON or OFF or ON .

TIME FWD

3RH

(0) 20 LO to

20 HI

Adjusts humidity display.

TIME FWD

4DRY

(OFF) LO or HI to OFF

To reduce or eliminate condensation during cold

weather. Use O setting first, if condensation persists

use HI setting.

TIME FWD

5OPTM CMFT

(ON) OFF

Enables improved dehumidification in cooling mode

if humidity is above setting.

TIME

FWD

6OPTM DHUM

(OFF) ON

Available if OPTM CMFT is ON. Provides extra

dehumidification if humidity is above setting. May

reduce temperature setpoint by up to 3 degrees.

TIME FWD

User Configuration Menu

User Configuration Menu (Continued)

Configuration

7(°F) °C

Adjusts temperature display between

°F or °C

TIME

FWD

8SET FAN

(0) 0 HRS (OFF) to

6 HRS

Set Fan (one shot) option. Set the duration of the

one shot option.

TIME

FWD

9BEEP

(ON) OFF

Turns beeper ON or OFF.

TIME

FWD

10 HEAT FAST

(ON) OFF

ON allows second stage to energize if setpoint is raised

3 or more degrees. OFF (economy) minimizes second

stage operation on setpoint changes.

TIME

FWD

11 COOL FAST

(OFF) OFF

ON allows second stage to energize if setpoint is

lowered 3 or more degrees. OFF (economy) minimizes

second stage operation on setpoint changes.

TIME

FWD

Enables Remote Sensor A (connected to SA).

TIME

FWD

REMT SEN A

(OFF) ON

Enables Remote Sensor B (connected to SA).

TIME

FWD

REMT SEN B

(OFF) ON

Enables Remote Sensor C (connected to SA).

TIME

FWD

REMT SEN C

(OFF) ON

15 STAT SEN L

(ON) OFF

OFF Disables Thermostat Sensor. (Only available if

remote sensor A, B, or C is connected).

TIME

FWD

9&10

User Configuration Menu (Continued)

CONFIGURATION MENU

FEATURES

AdjustableTemperature Display.

(User menu Item 1), The room

temperature display can be adjusted to

read higher or lower by following the

User menu and adjusting the tempera-

ture to a higher or lower value. The

thermostat is calibrated at the factory to

display a very accurate room tempera-

ture, but due to various conditions and/

or personal preference, you may wish to

adjust the thermostat display higher or

lower (up to 5°F). For example, if the

thermostat displays a room temperature

of 70° and you want it to display 73° the

display can be adjusted to read 73°. To

adjust, refer to the CONFIGURATION

section (page 5, step 1).

Selectable Energy Management

Recovery (EMR).

(User menu Step 2) EMR causes the

thermostat to start operating the system

early in order to make the building

temperature reach your program

setpoint at the time you specify. In

multistage heating, the thermostat will

start 8 minutes early for every 1°F

difference between the room tempera-

ture and the next programmed

temperature. In cooling and heat pump

applications, the thermostat uses 15

minutes per °F. For heating applica-

tions in large buildings where extra

time to reach the set temperature may

be desired, EMR ong may be

selected. When EMR ON L is selected

in the user menu (page 5, item 2) the

thermostat uses 15 minutes per °F.

EXAMP E: If the temperature in the

room is 65°F and the thermostat is

programmed for 70°F at 7 AM, the

thermostat will start approximately 40

minutes early. The difference between the

room temperature (65°F) and the setpoint

(70°F) is 5° and 5° X 8 minutes per °F =

40 minutes. The setpoint on the display

will actually change to display 70° about

40 minutes early. The maximum time the

thermostat can start early in heating is 75

Enables outdoor temperature sensor. Requires optional

F145-1378 outdoor sensor.

TIME

FWD

TEMP OUT

(OFF) ON 10

minutes (or 3 hours, 45 minutes if EMR

ON L is selected). The maximum time in

cooling and heat pump applications is 3

hours and 45 minutes. Cooling or heat

pump applications start earlier because it

takes longer to reach the desired

temperature. This feature also minimizes

the use of the auxiliary stages if conditions

are such that the compressor stages are

adequate to reach the desired setpoint.

To select or deselect this feature, refer to

the CONFIGURATION section (page 4,

step 2).

Adjustable Hum d ty D splay (RH)

(User Menu step 3) The room

humidity display can be adjusted to

read higher or lower by following the

configuration menu and adjusting the

humidity to a higher or lower value.

The thermostat is calibrated at the

factory to display a very accurate

room humidity, but due to various

conditions and/or personal preference,

you may wish to adjust the thermostat

display higher or lower (up to +/-

20%). For example, if the thermostat

displays room humidity of 40% but

you want it to display 43% you can

adjust it. To adjust, refer to the

CONFIGURATION section (page 4,

step 3).

Programmable Automat c

Hum d ty Reduct on (DRY)

(User Menu step 4)

This feature automatically lowers

humidity setting when the outside

temperature drops. This is to prevent

the interior windows/walls from

reaching the dew point where water

condenses on surfaces. To achieve

automatic humidity reduction, the

thermostat lowers the humidity when

furnace cycles are long. When the

furnace runs shorter cycles, it increases

humidity. For suggested settings see

table below.

Programmable Dehum d f cat on

Opt mal Comfort Mode (OPTM

CMFT)

(User Menu step 5)When turned on

this feature automatically reduces

indoor humidity during calls for

cooling if humidity is 2% above

setting. Humidity is set by pressing the

Humidity button when in the appropri-

ate mode, in this case Cooling, and

pressing the or buttons to

set desired humidity (range 40 to 95)

level followed by pressing Run

Program. This dehumidification

feature uses less energy by maintaining

temperature and dehumidifying only

when a call for Cooling is required.

Configuration

Programmable Dehumidification

Optimal Dehumidification Mode

(OPTM DHUM)

(User Menu step 6)When turned on

this feature automatically reduces

indoor humidity if humidity is 2%

above setting. Humidity is set by

pressing the HUMIDITY button

when in the appropriate mode, in this

case Cooling, and pressing the

or buttons to set desired

humidity level followed by pressing

RUN

PROGRAM. This dehumidifi-

cation feature may use more energy

by making dehumidification a priority

initiating a call for cooling if humidity

is 2% above desired setting. This

feature may also over-cool the

condition space by up to 3 degrees to

achieve the desired humidity level.

Fahrenheit or Celsius

Temperature Display.

(User menu Step 7) This thermostat

is factory set to display temperature in

Fahrenheit. If you prefer, you may

configure the thermostat to display

Celsius. See the CONFIGURATION

Section, page 4.

Single Period Fan Control.

(User menu Step 8) This feature

allows you to have the fan run for a

predetermined period of time by

pressing the FAN key twice within 1.5

seconds. If a time is set in the User

menu (page 4, step 8) the display will

show FAN, # hrs and PRG FAN ON

for six seconds. After six seconds the

display will continue to indicate PRG

FAN ON for the time period selected.

After this time period, the fan will

return to normal operation. To return the

fan to normal operation before the end of

the time period, press the FAN button.

Beeper on.

(User menu, Step 9) The thermostat

has a beeper that will emit a tone when

any key is pressed. In the user menu, the

BEEP feature can be turned OFF using

or to provide silent key

operation.

Heat Fast.

(User menu, Step 10) This feature,

when set to ON, will bring the second

stage of heating on any time you

manually raise the temperature three or

more degrees above room temperature.

If HEAT FAST is set to OFF, the

thermostat will delay the second stage

from 0 to 0 minutes based on how well

the first stage is keeping up with your

setting.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers 1F95-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F72-151 Bedienungsanleitung

White Rodgers

White Rodgers 1F85-277 Bedienungsanleitung

White Rodgers

White Rodgers 1E65-144 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-1277 Bedienungsanleitung

White Rodgers

White Rodgers 1F90-71 Bedienungsanleitung

White Rodgers

White Rodgers 1F80-0224 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-0671 Bedienungsanleitung

White Rodgers

White Rodgers 1F80-0261 Bedienungsanleitung

White Rodgers

White Rodgers 1F59-11 Montageanleitung

White Rodgers

White Rodgers 1F97-1271 Bedienungsanleitung

White Rodgers

White Rodgers 1F93-380 Bedienungsanleitung

White Rodgers

White Rodgers 1F85-275 Bedienungsanleitung

White Rodgers

White Rodgers 1C21 Bedienungsanleitung

White Rodgers

White Rodgers 1F51N-619 Bedienungsanleitung

White Rodgers

White Rodgers 1E30(W) Bedienungsanleitung

White Rodgers

White Rodgers 1F95-391 Bedienungsanleitung

White Rodgers

White Rodgers 1F87-361 Bedienungsanleitung

White Rodgers

White Rodgers 1F83-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F56W-911 Bedienungsanleitung

White Rodgers

White Rodgers 1F96 Series Bedienungsanleitung

White Rodgers

White Rodgers 1F90-51 Bedienungsanleitung

White Rodgers

White Rodgers 179 Bedienungsanleitung

White Rodgers

White Rodgers 1F82-0261 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung