White Rodgers NP110 Bedienungsanleitung

Model # NP110

Made in China

Single-Stage Thermostat

37-7581

Install Guide

GUIDE CONTENTS

Preparations ................................................. 3

Thermostat details........................................ 4

Removal of your old thermostat.................... 5

Mounting and wiring your new thermostat.. 10

Checking thermostat operation................... 12

Speciﬁcations ............................................. 20

Troubleshooting.......................................... 21

Failure to follow and read all instructions carefully before installing or operating this control could cause personal injury

and/or property damage.

WARNING

1. PREPARATIONS

1.1 Check package contents

This package should contain the following items:

• Thermostat

• Mounting screws and wall anchors (x2)

• 2 AAA batteries

• Terminal wire label stickers

• Installation instructions

1.2 Gather tools

Required tools:

□ Flat-head Screwdriver □ Small pliers (needle-nose) □ Drill with 3/16” (4 mm) bit

Optional tools:

□ Wire cutters/stripper □ Hammer

2. THERMOSTAT DETAILS

The thermostat buttons and switches

(Up arrow) Raises temperature setting.

(Down arrow) Lowers temperature setting.

FAN switch (ON, AUTO).

SYSTEM switch (COOL, OFF, HEAT).

Fan

On Auto Cool Off Heat

System

3. REMOVING OLD THERMOSTAT

3.1 Turn off power

To prevent electrical shock and/or equipment damage, disconnect electrical power to the system at the main fuse or circuit breaker box, or by ﬂipping

a switch at the air handler. Do not restore power until installation is complete.

WARNING

To ensure the power to your heating and cooling system has been turned off, try to turn on heating or cooling by

changing the temperature on your old thermostat.

3.2 Remove the old thermostat cover

Remove the old thermostat’s front cover from the wall base. Some covers pull off easily, while others may need to

be released by using a screwdriver.

3.3 Label wires

Tip: Taking a picture with a camera or smartphone can help you not only remember how wires are connected

to the terminals, but can also ensure that you label your wires correctly. Mislabeling the wires may result in a

high energy bill or damage to your heating and cooling system.

Your old thermostat may have a sealed glass tube containing mercury. Be careful not to damage the tube or dispose of the tube in your trash. For safe

disposal information, please see Mercury Notice on page 27.

CAUTION

Using your screwdriver, carefully unscrew one wire at a time from the terminal block and attach the corresponding

wire label sticker.

Please note that not all terminals may be used, and that there’s no standard color code for thermostat wires, so your

wire colors may vary. For your reference, we’ve included a terminal label reference chart to help you connect the

wires in your old thermostat to your new thermostat in case you get stuck.

Terminal labeling reference chart

If your current terminal has

the following letter

Label the wires with the

following letters Terminal function

RH, R, R5, 5 RH 24V Power (Heating)

RC RC 24V Power (Cooling)

W, W1, 4 W Heating Relay

Y, Y1 Y Cooling Relay

G G Fan Relay

O O Reversing Valve (for heat pump applications

energized in Cool mode)

B B Reversing Valve (for heat pump applications

energized in Heat mode)

3.4 Identify jumper wire

For terminal RC and RH:

On your old thermostat, if… Then, on your new thermostat…

Terminal RC and RH are connected

with a jumper wire Leave the jumper wire in its place

There’s only one R wire (RC, RH, R or R5)

coming out of the wall Leave the jumper wire in its place

Terminal RC and RH (or 5 or R5) are NOT

connected by a jumper wire Remove the jumper wire between RC and RH

For terminal Y and W:

If you have a heat pump with reversing valve, connect Y and W with a jumper wire on your new thermostat.

If you need help with labeling and wiring, please contact Customer Support at 877.654.9394 or email

wr[email protected] — we’re here to help!

3.5 Remove old thermostat base

With all of your wires disconnected and properly labeled, you may now safely remove the thermostat base from

your wall.

Tip: Worried about having your wires falling into your wall? Keep the wires secure by wrapping the them

around a pencil.

4. MOUNTING AND WIRING YOUR NEW THERMOSTAT

4.1 Install new thermostat base

Mount your new thermostat base using the supplied screws. Drill holes and insert wall anchors to secure the

thermostat base to the wall, if necessary.

4.2 Connect wires to corresponding terminal blocks

Match each labeled wire to it’s corresponding terminal on the mounted thermostat base. Insert each labeled wire into

the hole of it’s matching terminal, and using the screwdriver, tighten the screw on the terminal block securely.

Take care when securing and routing wires so they do not short to adjacent terminals or rear of thermostat. Personal injury and/or property damage

may occur.

CAUTION

Inhaltsverzeichnis

Andere White Rodgers Thermostat Handbücher

White Rodgers

White Rodgers UP300 Verdrahtungsschema

White Rodgers

White Rodgers 1F93-380 Bedienungsanleitung

White Rodgers

White Rodgers 750 Bedienungsanleitung

White Rodgers

White Rodgers 1F72-151 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-391 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-1291 Bedienungsanleitung

White Rodgers

White Rodgers 1E78 Bedienungsanleitung

White Rodgers

White Rodgers 1F56N-911 Bedienungsanleitung

White Rodgers

White Rodgers 37C72U Bedienungsanleitung

White Rodgers

White Rodgers 1C26 Bedienungsanleitung

White Rodgers

White Rodgers 1F94-71 Bedienungsanleitung

White Rodgers

White Rodgers 1E65-144 Bedienungsanleitung

White Rodgers

White Rodgers 1F87-51 Bedienungsanleitung

White Rodgers

White Rodgers 1F95-397 Bedienungsanleitung

White Rodgers

White Rodgers Thermostat Bedienungsanleitung

White Rodgers

White Rodgers 1F89EZ-0251 Montageanleitung

White Rodgers

White Rodgers 1E78-151 Installationsanleitung

White Rodgers

White Rodgers WHITE RODGERS 1E50N-303 Bedienungsanleitung

White Rodgers

White Rodgers 1F83-261 Bedienungsanleitung

White Rodgers

White Rodgers 1E78-140 Bedienungsanleitung

White Rodgers

White Rodgers 1D51 Bedienungsanleitung

White Rodgers

White Rodgers 7904 Bedienungsanleitung

White Rodgers

White Rodgers 90 SERIES 1F95-391 Bedienungsanleitung

White Rodgers

White Rodgers 1F85RF-275 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung