
GENERAL INFORMATION
1. A qualified electrician, in accordance with IEE wiring regulations, should carry out
connection to mains wiring.
2. Ensure that the rated voltage and frequency requirements are compatible with the
available mains supply.
3. Cleaning of reflectors and lenses should be carried out using clean, soft and lint free
cloths and anti-static cleaning fluid.
4. Do not carry out high voltage insulation test, i.e. 500/1000v this may damage internal
components.
5. Electrically isolate this luminaire during maintenance.
6. Replacing the light source within this luminaire shall only be carried out by the
manufacturer, service agent or a similar qualified person.
Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Telephone +44 (0)870 5 087 087 Facsimile: +44 (0)870 5 084 210
Registered No. 3848973 England Registered Office: As above
PK-LEAF-TEGANSLIM
TECHNICAL SUPPORT
Tel: 0161 331 5700
www.whitecroftlighting.com
TEGAN SLIM 600SQ
RECESSED LED
LUMINAIRE
Installation Instructions
Jun 2018 - Rev04
SPECIFICATION
Dimensions 595 x 595 mm
Weight 4.2kg STD / 5.5kg EM/EP opons
Finish Body RAL 9003
Materials Body Rigid 0.5 mm mild steel
Diuser Area - Tp(b) 1.5mm Acrylic diuser material.
Tp(a) 3mm Polycarbonate diuser material.
Oce -2.5mm acrylic micro prism
Lamp Opons 2 x LED boards.
Control Gear Fixed Output electronic control gear.
Dali Dimming gear.
Ceilings Lay-in T15 and T25 only.
Emergency opons 3 hour maintained integral inverter
Integral COMEPS inverter (can be wired as Easy Test)
IP Rang IP44
Supply 220V-240V 50/60Hz
Cable spec 1.5mm2 Max