Wicrypt Lynx Bedienungsanleitung
Lynx Instruction Manual
Quick Start Guide
For more information isit www.wicrypt.com
Items Check List
Device
5V Charger and Cable
Sim Card
Page 2
Before starting, check that all the following items have been included with your
device. If anything is missing, contact your dealer
Hotspot hub Device is being referred to as in this manual for the purpose of simplicity
You should install the mobile app or go to the Wicrypt website link
and create a Wicrypt account. www.dashboard.wicrypt.com
Nomenclature
Page 3
Hotspot hub Device is being referred to as in this manual for the ur os
of sim licity
Power Switch
(ON/OFF)
Network IndicatorNetwork Indicator
Wifi Indicator
Ethernet Indicator
Battery Indicator
USB ort
Power Source Port
Ethernet Port
Sim Port
Device Reset
Contents
Page 4
Introduction 2
Items C eck List 2
Nomenclature 3
Contents 4
Quick Start Guide 5
Setting up t e Device 5
Connection via Wi-Fi 6
Connection via Et ernet Cable 7
Device Dashboard Setup 9
How to Connect to your Wicrypt Device 9
How to Register a Device 10
How to Setup Device Password 12
How to C ange Device SSID Name 14
How to Switc from Personal to Business Mode 16
How to Switc from Buisness to Personal Mode 18
How to Setup/C ange your Device name (SSID) to your Business Name 21
Staking 25
How to Stake and Start Mining Wicrypt Network
T
okens (WN
T
)25
Quick Startup Guide
Setting up the Device
1
Make su e the inte nal batte y is cha ged, if not, connect the device to a
powe sou ce
2
Inse t you sim ca d o connect to the inte net via you ethe net cable.
3
Tu n ON the Device.
Page 5
Quick Startup Guide
4
Wait for 6 minute for the Wicrypt firmware to fini h initialization. Confirm the
following LED ; Network indicator, Wi-Fi indicator and Ethernet Indicator are
ON.
Page 6
Connection via Wi-Fi
1
En ure that the Wi-Fi light i on and blinking. It can take up to 6 minute for
the device to be ready
2
Connect your phone or PC via WiFi to the device SSID.
Note: The network indicator blink when it i on
Quick Startup Guide
3
Authenticate your device via the Wicrypt captive portal (this step is only
required if Wicrypt business is enabled)
Page 7
Note: You can access the captive portal using the URL wicryptlogin net or 192 168 4 4 if
the captive portal is not displayed automatically
Connection via Ethernet Cable
1
Kindly follow the steps in setting up your device with a SIM card above in page
5
Set up your device
with a SIM card
2
Connect an ethernet cord from the PC to any of the LAN ports
Quick Startup Guide
4
Click th quick s tup tap and switch from LAN to WAN
Page 8
Not : You can acc ss th captiv portal using th URL wicryptlogin.n t or 192.168.4.4 if
th captiv portal is not display d automatically.
3
Auth nticat your d vic via th Wicrypt captiv portal. (this st p is only
r quir d if Wicrypt busin ss is nabl d).
Dashboard Device Setup
Page 9
How to connect to you Wic ypt Device
1
Insert a SIM card or connect your Wicrypt device via the Ethernet cable to the
internet
2
Make sure you are connected to the device network via Wi-Fi or Ethernet
cable
3
Open your browser and type in the IP 192.168.4.4 or the URL wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or
Dashboard Device Setup
Page 10
How to egiste a Device
1
Insert a SIM card or connect your Wicrypt device via the Ethernet cable to the
internet
4
Input “admin” as the device password to login to the portal
5
Click ‘Login’
Andere Handbücher für Lynx
1
Inhaltsverzeichnis
Andere Wicrypt Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
