WiebeTech FCD Bedienungsanleitung

Forensic ComboDock User’s Manual - 1 -

FORENSIC ComboDock™

USER’S MANUAL

Revised October 23, 2006

Features

•Portable and rugged write-blocked solutions to image drives

in the field – WiebeTech's proprietary write-blocking technology

offers easy read-only access to suspect hard drives through high

speed FireWire 800 (400 compatible) interfaces.

•Retrieve data from 3.5" IDE drives through FireWire 800 (400

compatible) – Forensic ComboDock is the best solution for

accessing data from suspect 3.5" IDE drives. It quickly attaches

drives via FireWire 800 (400 compatible). With two FireWire

ports, it's daisy-chainable for more versatility.

•Triple status indicators – show power connected, power on/off,

and hard drive access

•Rugged design, built to last – Grab it and go! Forensic ComboDock is tough as nails and made to

last. The small and rugged case contains a complete, high speed Oxford Semiconductor OXFW922

bridge and is constructed from briefcase-tough aluminum for durability. World-compatible AC adapter

accepts 100-240VAC so you can trot the globe.

•Connect even more types of drives with Combo Adapters

Use ComboDock in conjunction with our lineup of Combo Adapters and retrieve data on other drive

types such as 1.8" Toshiba (found in iPods), 1.8" Hitachi drives, MicroDrives (found in iPod mini),

PCMCIA drives, 2.5" notebook drives and SATA drives.

•Bus-powered version available! Powered via FireWire - not a wall wart

For more portability check out our bus-powered version of Forensic ComboDock. That's right ... bus-

powered, needing NO AC ADAPTER to power the drive. The outer FireWire port accepts bus power

from hosts that provide adequate power, allowing single cable operation. Available for IDE drives (FCD-

BP) or with the SATA adapter included (FCD-BP-SATA).

Forensic Device User Advisory

We recommend that you perform a final check on this product.

Prior to first use, please verify that the write-blocking function of this product is working properly. This is

easily done: attach a known good formatted drive, and verify that the drive mounts properly on your

computer. Use a drive that has data on it that you are willing to overwrite. Transfer files to the drive. The

files will appear to transfer to the drive. Thereafter, unmount the drive and remount the drive. The files

that you wrote to the drive should not appear after the drive is remounted. If they do appear, there is a

problem with your Forensic Device, and you should contact our support department for further

instructions.

WiebeTech support may be reached at:

(866) 744-8722 (toll free)

(316) 744-8722 (international)

(316) 744-1398 (fax)

[email protected] (email)

WiebeTech LLC

Installation Instructions

This step is optional but recommended.

Attach bottom plate to your 3.5 inch IDE hard drive. The purpose of the

bottom plate is to provide protection to your drive electronics. Attach the

bottom plate to your drive. Use the four screws which are supplied. Attach a

rubber bumper to each corner. Extra bottom plates are available from

WiebeTech.

Drive-Side Connectors

AFour-pin power connector (Female)

BKeyed IDE connector (Female)

Back-Side Ports

A1394b FireWire 800 Ports (2)

BDC Power connector from AC adapter

CTwo-position power switch: OFF / ON

Drive must be jumpered as Master. Consult the instructions for your drive.

Forensic ComboDock will not read from drives configured as Slave. Some

drives have two Master settings, one with slave present and one with no Slave

present. Try the “Master with NO Slave Present” setting first. Certain drives,

especially Western Digital, may require the drive to be jumpered to “Cable

Select” when the “Master” setting does not work.

Attach the four-pin power connector from the ComboDock to the drive before

connecting the IDE connector.

HINT: You can start the connector as shown, then use the bottom of the case to push it in. Just be

careful that the case does not slip off of the connector.

The forty pin IDE connector on the ComboDock matches exactly with your

drive. The connector is keyed to match the drive. Ensure that you have

carefully lined it up. Firmly, but with great care, attach the ComboDock to

your drive. You may notice the gasket that runs along the side of the dock

facing the drive. This is for FCC compliance and should not be removed.

A B C

Forensic ComboDock User’s Manual - 2 -

WiebeTech LLC

Power supply. The 12V adapter must supply power to Forensic

ComboDock. Once power is attached, the Forensic ComboDock is ready to

attach to a computer via a FireWire cable. Forensic ComboDock may utilize

any 12V regulated switching power supply capable of supplying 2A or greater.

Do not use unregulated adapters, as damage may occur to the Forensic

ComboDock or the attached drive.

When power is attached, the green LED will illuminate (A). The green LED in

the middle illuminates when the power switch is in the ON position (B). The

red LED illuminates when the drive is being accessed (C). The red LED

access indicator will illuminate briefly after the unit is powered up, indicating

that the FireWire Bridge has successfully established communication with the

drive. Thereafter, it will illuminate whenever the drive is accessed. If the

access LED does not blink shortly after drive spin up, it may indicate a

problem with the drive or the Forensic ComboDock. If the access LED blinks

at a steady rate, this also may be indicative of a problem or an incorrectly

jumpered drive. Contact technical support for further assistance if necessary.

8. Usage with a Mac. Operation is plug and play under Mac OS 9.1, 9.2 and OS X. No drivers are needed. FireWire 800

ports are FireWire 400 host compatible.

Usage with a PC. The Forensic ComboDock is plug and play with 98SE, 2K, ME, and XP. No drivers are needed.

FireWire 800 ports are FireWire 400 host compatible.

Macintosh Booting. The firmware supports FireWire booting on a Mac that supports booting from an external FireWire

drive.

Installation Instructions for optional SATA Converter:

There are two connectors that attach to the Forensic

ComboDock:

A– 40-Pin IDE Connector (Male)

B– Four-Pin Power connector (Male)

Attach the power connector of the ComboDock to the SATA

Converter.

Attach the IDE Connectors of the ComboDock and the SATA

Converter.

Forensic ComboDock User’s Manual - 3 -

WiebeTech LLC

Turn the ComboDock and the SATA Converter upside down.

Attach the power connector to the Serial ATA hard drive.

Attach one end of the Serial ATA cable to the data connector

on the hard drive.

Attach the other end of the SATA cable to the SATA

Converter. You may now use the ComboDock as previously

described using the AC adapter and FireWire cables.

Note: This version of the ComboDock does not support CD/DVD drives. You may contact support for additional information.

Forensic ComboDock is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.

FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.”

Forensic ComboDock

Tested to comply

with FCC standards

FOR HOME OR OFFICE USE

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

1) Ensure that the bottom plate and case of your attached drive is grounded, either to the DriveDock case or to an Earth ground.

2) Use a FireWire cable with RFI reducing ferrites on each end.

3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

If you have any questions or problems, please contact support@wiebetech.com for technical support. If

you are interested in purchasing more WiebeTech products, check our website or contact

[email protected]. We appreciate being able to serve you!

Forensic ComboDock User’s Manual - 4 -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere WiebeTech Lagerung Handbücher

WiebeTech

WiebeTech NVMe WriteBlocker Bedienungsanleitung

WiebeTech

WiebeTech CGB Bedienungsanleitung

WiebeTech

WiebeTech Forensic FRTX400H-QJ Bedienungsanleitung

WiebeTech

WiebeTech DGB Bedienungsanleitung

WiebeTech

WiebeTech SIS 1 Bedienungsanleitung

WiebeTech

WiebeTech RTX100-SJ Bedienungsanleitung

WiebeTech

WiebeTech SIS2-SR Bedienungsanleitung

WiebeTech

WiebeTech Ditto x86 SE Bedienungsanleitung

WiebeTech

WiebeTech BayDock 800 Handbuch

WiebeTech

WiebeTech MJ 1 Bedienungsanleitung

WiebeTech

WiebeTech MGB Bedienungsanleitung

WiebeTech

WiebeTech RTX400-UR Bedienungsanleitung

WiebeTech

WiebeTech RTX400-SJ Bedienungsanleitung

WiebeTech

WiebeTech RT8 Bedienungsanleitung

WiebeTech

WiebeTech TDK Bedienungsanleitung

WiebeTech

WiebeTech ProSATA SS8 Bedienungsanleitung

WiebeTech

WiebeTech FCD-BP Bedienungsanleitung

WiebeTech

WiebeTech FODDP Bedienungsanleitung

WiebeTech

WiebeTech RTX400-UR Bedienungsanleitung

WiebeTech

WiebeTech RTX400-QR Bedienungsanleitung

WiebeTech

WiebeTech FW8 Bedienungsanleitung

WiebeTech

WiebeTech RT5E Montage- und Bedienungsanleitung

WiebeTech

WiebeTech TDKES2 Bedienungsanleitung

WiebeTech

WiebeTech SIS5-UR Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

HP P9000 Bedienungsanleitung