WiebeTech SIS4-SJ Bedienungsanleitung

SilverSATA IV SJ User Manual - 1 -

SilverSATA™ IV SJ

USER’S MANUAL

Revised 9/21/2006

Features

•Connects through fast eSATA. When configured in a

software RAID, we’ve seen data transfer speeds faster

than 200MB/sec!

•Each SATA hard drive has its own data channel for

maximum speed.

•Hot-swappable trays allow you to quickly change out

drives. Trays are interchangeable with other products in

the SilverSATA series.

•Its attractive design takes up little desktop space,

occupying a tiny footprint for so much storage capability

(up to 3 Terabytes).

•Sturdy aluminum case provides excellent heat dissipation

and rugged durability.

Table of Contents

Before Installation 2

Contents of the box 2

Identifying the parts of the product 2

Hardware Setup 3

Installing hard drives 3

Connecting to a computer 4

LED Indicators 5

Usage with Macs 5

Usage with Windows computers 5

Warnings and Notices 6

Technical Specifications 6

WiebeTech LLC

SilverSATA IV SJ User Manual - 2 -

Before Installation

1. Check the accessories with your SilverSATA IV. Please contact WiebeTech if any items are

missing or damaged. The box should contain the following items:

SilverSATA IV enclosure 1

Removable trays (inside enclosure) 4

eSATA cables 4

Power cord 1

Packet of keys and drive screws 1

Manual and Warranty information (on CD)

2. Familiarize yourself with the parts of your SilverSATA IV. This knowledge will be useful during

hardware setup.

Front View Rear View

WARNING: Do not block the v

fan during operation. Overheating

damage the device or hard drives.

entilation

may

WiebeTech LLC

SilverSATA IV SJ User Manual - 3 -

Hardware Setup

1. Install a host bus adapter (HBA) with 4 eSATA ports into an empty

expansion slot inside your computer (optional). If your computer already

has 4 available eSATA ports, you can skip this step. Compatible HBA cards

are available from WiebeTech (www.wiebetech.com). The following general

steps will work for most cards. Instructions for individual cards may vary, so

consult your host card’s user manual.

a) Power down the computer system.

b) Insert the PCI card into an available PCI slot. Do not force it, but it will take firm pressure to fully

seat the interface. It may help to gently rock the card back and forth as you apply pressure.

c) Once the card is fully seated in the slot, secure it in place with a screw.

d) Turn the computer back on.

e) Install the appropriate drivers for the card. These are usually found on the CD or diskette that

came with the card. The drivers for WiebeTech cards are found on the “Product Information &

Manuals” CD. Browse to the folder “Other WiebeTech Products - Manuals & Drivers ÆPCI,

PCIe Host Cards” and then select the subfolder for your specific model.

2. Remove a tray from the SilverSATA IV enclosure. Insert the included key into the lock hole to

release the tray’s handle and then slide the tray straight out.

3. Remove the plastic insert from the tray. The plastic inserts help protect the trays during

shipment. They are not needed to operate the unit, and must be removed before drives can be installed.

WiebeTech LLC

SilverSATA IV SJ User Manual - 4 -

4. Install your SATA hard drive into the tray. Lay the drive into the frame of the removable tray,

making sure it lays flat. Align the 4 screw positions then use the included screws (#6-32) to secure the

drive into position.

5. Insert the tray into the SilverSATA IV unit. Gently push the tray along the sliding track into the

hard drive compartment and then close the tray, as illustrated below. Repeat steps 2 through 5 for each

of the other trays.

6. Plug in the eSATA cables and power cord. The SilverSATA IV connects to your computer

through eSATA, an external application of Serial-ATA technology. One end of the cable connects to the

back of the unit. Insert the other end into an eSATA port on the computer.

Your SilverSATA IV is now ready to use! Turn on the power switch on the back of the unit. If your drives

are already formatted, you can begin using them right away. New hard drives will need to be formatted

before they can be used. Initially, each drive is seen as a separate drive by the computer. If you wish,

you may format each drive into a separate volume and use them individually. If you have software for

creating a RAID (Redundant Array of Independent Disks), you may combine the drives into a single

volume for faster performance and/or data redundancy. Some operating systems, such as OS X, have

this software built in.

WiebeTech LLC

SilverSATA IV SJ User Manual - 5 -

LED Indicators

•HDD Access LED will flash blue when the computer accesses data on the hard drive.

•Power LED will glow blue if the power is turned on.

•Fail LED will light red if the internal temperature exceeds 60° C or the fan fails.

Usage with Macintosh computers

Mounting and Unmounting Volumes

When you connect the unit to the Mac for the first time and turn on the power,

you may see a message saying that the disks are unreadable. This is because

you must format the drives before use. The easiest way to do this is with Mac

OS X’s Disk Utility. Select “Mac OS Extended” as the format type. After the

volume is formatted, an icon representing the drive volume will appear (mount)

on the desktop. You can now use the volume just like an internal hard drive.

Unmount each volume before powering down the unit by dragging the

volume’s icon to the trash bin, or by selecting the volume then pressing

Command-E. Shutting down the unit without first unmounting the volume can

result in data loss.

Booting to the SilverSATA IV

Your ability to boot to the SilverSATA IV depends upon whether or not the eSATA host to which it is

connected supports this feature. Many eSATA hosts do not support booting.

Usage with Windows computers

Formatting/Mounting Volumes

Before you can use your SilverSATA IV, you must first format the drives. Use Disk Management, which

you can find by right-clicking on My Computer then selecting Manage. Select NTFS for the format type.

After the volume is formatted, an icon representing the drive volume will appear in My Computer. You

can now use the volume just like an internal hard drive.

Ejecting Volumes

You will not be able to eject the SilverSATA IV like you can with devices that connect via FireWire or

USB. Make sure no applications are accessing data from the drives before powering off the unit. Check

the drive access LEDs to make sure no drive activity is taking place. Turning off the SilverSATA IV during

hard drive access could result in data loss.

WiebeTech LLC

SilverSATA IV SJ User Manual - 6 -

Warnings and Notices

•Use only hard drives that are in perfect condition. Avoid using drives that have ever developed

bad sectors during previous usage. This could lead to possible device failure or loss of data.

•The SilverSATA IV supports drives of various specifications and different capacities. However, if

you wish to use the drives in a software RAID configuration, we recommend using drives of the

same brand and type for optimal performance. If drives of different capacities are used, the

capacity of the smallest drive will determine how much of each drive is used. The additional

capacity on the larger drives will not be used by the RAID.

•Creating a software RAID level 0 will allow you to use the full capacity of the drives, and offers the

best data transfer speeds. However, RAID 0 offers no protection for the data. If one drive fails in

a RAID 0, the data on all of the drives is irretrievably lost. Before creating a software RAID,

investigate the various RAID types and choose the one that is best for your needs.

•If you create a software RAID 0, do not attempt to hot swap trays. Drives must be kept together in

a RAID 0, or data loss will result.

Technical Specifications

Product name / Code SilverSATA IV SJ / SIS4-SJ

Host Interfaces eSATA (one connection for each drive)

Data Interface Speed SATA 3.0GHz (up to 300MB/sec)

Drive Types Supported 3.5” SATA1 & SATA2 hard drives (Serial-ATA) up to 750GB+

Hot-Swappable Trays Yes, when used with a SATA host that supports hot-swapping.

Operating System

Requirements Windows 2K, XP, Server 2003

Mac OS X

Cooling Fan 80mm ball bearing fan for cooling hard drives

Operating Temperature 50 – 85° Fahrenheit (10 – 30° Celsius)

Operating Humidity 5% to 95%, noncondensing

Power Supply Input: 100-240VAC

Output: 200 Watts

Certifications CE/FCC

External Material Aluminum alloy case

Shipping Weights 10 pounds, sans drives

15 pounds, with drives

Dimensions (124mm W x 210mm D x 166mm H)

Warranty 1-year limited warranty. See warranty statement for details and limitations.

WiebeTech offers free phone support for 90 days after purchase (1-866-744-8722).

After 90 days, email support is available at [email protected].

SilverSATA is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.

WiebeTech LLC

SilverSATA IV SJ User Manual - 7 -

FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.”

SilverSATA IV SJ

Tested to comply

with FCC standards

FOR HOME OR OFFICE USE

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

1) Ensure that your unit is plugged into a grounded electrical outlet.

2) Use a data cable with RFI reducing ferrites on each end.

3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

If you have any questions or problems, please contact support@wiebetech.com for technical support. If

you are interested in purchasing more WiebeTech products, check our website or contact

[email protected]. We appreciate being able to serve you!

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere WiebeTech Lagerung Handbücher

WiebeTech

WiebeTech CGB Bedienungsanleitung

WiebeTech

WiebeTech FCD Bedienungsanleitung

WiebeTech

WiebeTech RT8 Bedienungsanleitung

WiebeTech

WiebeTech FOD Bedienungsanleitung

WiebeTech

WiebeTech RTX100-SJ Bedienungsanleitung

WiebeTech

WiebeTech RTX400-NJ Bedienungsanleitung

WiebeTech

WiebeTech UltraDock v5 Bedienungsanleitung

WiebeTech

WiebeTech FW8 Bedienungsanleitung

WiebeTech

WiebeTech ToughTech mini Bedienungsanleitung

WiebeTech

WiebeTech Forensic UltraDock FUDv6 Bedienungsanleitung

WiebeTech

WiebeTech RTX400-UR Bedienungsanleitung

WiebeTech

WiebeTech MJ 1 Bedienungsanleitung

WiebeTech

WiebeTech FWDD Bedienungsanleitung

WiebeTech

WiebeTech SIS5-UR Bedienungsanleitung

WiebeTech

WiebeTech G5J Bedienungsanleitung

WiebeTech

WiebeTech CDK Bedienungsanleitung

WiebeTech

WiebeTech ProSATA SS8 Bedienungsanleitung

WiebeTech

WiebeTech ProSATA SS8 Bedienungsanleitung

WiebeTech

WiebeTech G5J Bedienungsanleitung

WiebeTech

WiebeTech RTX400-IR Bedienungsanleitung

WiebeTech

WiebeTech SIS5-UR Bedienungsanleitung

WiebeTech

WiebeTech ToughTech FS Mini 500GB Bedienungsanleitung

WiebeTech

WiebeTech SIS2-FH Bedienungsanleitung

WiebeTech

WiebeTech RTX220-QJp Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung