WiebeTech FODDP Bedienungsanleitung
F o r e n s i c D r i v e D o c k + U s e r M a n u a l - 1 -
Forensic DriveDock+™
USER’S MANUAL
Revised May 2, 2007
Features
•Dual, daisy-chainable FireWire 400 ports
•Write-blocking preserves the integrity of evidentiary drives
•Two options for power input: Use the included AC adapter, or
use a Molex connector from a computer’s power supply
•LEDs show both power input and power output status
•Host-detection LED indicates valid connection to FireWire host
•Power status LED verifies that unit is switched on (or off)
•Power switch helps prevent port damage during plug insertion,
and allows drive to be powered down when not in use
•Small size (3.2” x 2.2” x 0.95”) allows you to take it anywhere
•Aluminum case is briefcase tough, with excellent heat dissipation
•World-compatible AC adapter accepts 100-240VAC so you can trot the globe
Forensic Device User Advisory
We recommend that you perform a final check on this product.
Prior to first use, please verify that the write-blocking function of this product is working properly. This is
easily done: attach a known good formatted drive, and verify that the drive mounts properly on your
computer. Use a drive that has data on it that you are willing to overwrite. Transfer files to the drive. The
files will appear to transfer to the drive. Thereafter, unmount the drive and remount the drive. The files
that you wrote to the drive should not appear after the drive is remounted. If they do appear, there is a
problem with your Forensic Device, and you should contact our support department for further
instructions.
Installation Instructions
1. Check the accessories with your Forensic DriveDock+. Please contact WiebeTech if any items are missing
or damaged. The box should contain:
Forensic DriveDock+ 1
AC adapter & power cord 1
FireWire 400 cable 1
Metal bottom plate 1
Hard drive screws 4
Rubber bumpers 6
Manual and Warranty information (on CD)
WiebeTech LLC
F o r e n s i c D r i v e D o c k + U s e r M a n u a l - 2 -
2. Attach bottom plate to your 3.5” hard drive. This step is optional but recommended. The purpose of the
bottom plate is to provide protection to your drive electronics and aid heat dissipation. Attach the bottom plate to your
drive using the four screws supplied. Attach a rubber bumper to each corner. Extra bottom plates are available from
WiebeTech.
3. Take a moment to familiarize yourself with the parts of your new DriveDock. This will aid you in the
remaining steps.
4. Configure the jumpers on your hard drive. The drive must be set to the Master setting. Consult the
instructions for your drive (some drives display configuration information on the drive’s label). A few drives have both
“Master with Slave Present” and “Master without Slave” options. Choose the latter in this case. In rare cases, if the
Master setting does not work then try Cable Select.
A
DC +12V power input from AC adapter
B1394a (FireWire 400) ports
C4-pin DC input
DPower Switch (On / Off)
E4-wire power cable, connects to drive.
FIDE ribbon cable, connects to drive.
a
+12V DC power input is present
bUnit is write-blocked
cUnit is connected to FireWire host
dhard drive access
e+12V Power output to drive
f +5V Power output to drive
g4-pin power input is present
Forensic
FireWire
DriveDock+™
+12
+5
4 PIN
0
|
+12
(Example)
LEDs
WiebeTech LLC
F o r e n s i c D r i v e D o c k + U s e r M a n u a l - 3 -
Note: The DriveDock+ may utilize any 12V
regulated switching power supply capable of
supplying 2A or greater. Do not use an
unregulated adapter, as damage may occur to
the Dock or the attached drive.
5. Connect the hard drive to the dock.
6. Connect the FireWire cable from your computer into the appropriate port on the DriveDock.
7. Connect power to the DriveDock. There are two options. The most common usage is to plug in the AC
adapter. When the adapter is connected, the LED labeled “+12” will illuminate. Alternatively, you may supply power
through a standard 4-pin Molex connector from the computer’s internal PSU. This option makes it easy to access a
drive still mounted inside a computer case. When power is connected in this way, the LED labeled “4 PIN” will
illuminate.
Your DriveDock is now ready to use! Turn on the unit by moving the power switch toward the side labeled “|”. When
power is on, the output LEDs “+12” and “+5” will illuminate to show that power is going to the hard drive.
The red LED access indicator will light briefly after the unit is powered up, indicating that the FireWire bridge has
successfully established communication with the drive. Thereafter, it will light whenever the drive is accessed. If the
access LED does not blink shortly after drive spin up, it may indicate a problem with the drive or the dock. If the
access LED blinks at a steady rate, this also may be indicative of a problem or an incorrectly jumpered drive. Contact
technical support for further assistance if necessary.
Usage with Macintosh Computers
Compatibility
The Forensic DriveDock+ is fully plug-and-play under Mac OS 9.2 and OS X. No drivers are needed.
Mounting and Ejecting Volumes
When the drive is connected and the unit is turned on, the drive’s volume(s) will mount to the desktop. You can
access the drive and begin retrieving data right away.
Usage with Windows Operating System
Compatibility
The Forensic DriveDock+ is fully plug-and-play with Windows XP. No drivers are needed.
Mounting and Ejecting Volumes
When the drive is connected and the unit is turned on, the drive’s volume(s) will mount to My Computer. You can
access the drive and begin retrieving data right away.
A. Attach the free end of the IDE ribbon cable to
the back of the hard drive. The connector is
keyed to insert only one way. The IDE pins on the
hard drive are fragile, so be very careful when
inserting or removing the IDE connector.
B. Attach the 4-pin power connector from the
dock into the back of the hard drive. As with the
IDE cable, the power connector will only fit one
way.
WiebeTech LLC
F o r e n s i c D r i v e D o c k + U s e r M a n u a l - 4 -
Technical Specifications
Product Code
FODDP
Interface
FireWire 400 using OXFW911
USB is not supported for forensic usage
External
Power Supply
100-240VAC +12V / 3A (included)
Power Input
(+12V): +12V DC Jack
(+12V / +5V): Standard disk drive 4-pin Molex power jack
Power Output
+12V / +5V
Power Switch
On / Off
Host Indicators
FireWire host attached LED
Access Indicator
Provides visual indication of hard drive activity
W
rite Block indicator
Indicates write-blocked operation
Operating Temperature
50 – 85°Fahrenheit (10 – 30°Celsius)
Operating Humidity
5% to 95%, noncondensing
Compatibility
3.5 inch IDE drives
Operating System
Windows XP
Mac OS 9.2, OS X
Linux distributions supporting FireWire
Shipping Weight
3 pounds, including AC adapter
Dimensions
3.2” x 2.2” x 0.95” (81mm x 56mm x 24mm)
Dimensions are exclusive of attached plates, drives, and cables.
Warranty
1-year limited warranty. See warranty statement for details and limitations. 90 days
Forensic DriveDock+ is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.
© 2005 WiebeTech LLC. All rights reserved.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the bottom plate and case of your attached drive is grounded, either to the DriveDock case or to an Earth ground.
2) Use a FireWire cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact support@wiebetech.com for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact sales@wiebetech.com. We
appreciate being able to serve you!
Forensic DriveDock+
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere WiebeTech Lagerung Handbücher
WiebeTech
WiebeTech SIS2-FH Bedienungsanleitung
WiebeTech
WiebeTech RF Bedienungsanleitung
WiebeTech
WiebeTech MAX Bedienungsanleitung
WiebeTech
WiebeTech RTX200H-QJ Bedienungsanleitung
WiebeTech
WiebeTech RTX400-UR Bedienungsanleitung
WiebeTech
WiebeTech FODD Bedienungsanleitung
WiebeTech
WiebeTech MJ 1 Bedienungsanleitung
WiebeTech
WiebeTech RTX200H-SJ Bedienungsanleitung
WiebeTech
WiebeTech G5JE Bedienungsanleitung
WiebeTech
WiebeTech I Bedienungsanleitung
WiebeTech
WiebeTech CGB Bedienungsanleitung
WiebeTech
WiebeTech SIS5-UR Bedienungsanleitung
WiebeTech
WiebeTech CDK Bedienungsanleitung
WiebeTech
WiebeTech SDGB Bedienungsanleitung
WiebeTech
WiebeTech UltraDock v5 Bedienungsanleitung
WiebeTech
WiebeTech RT5 Bedienungsanleitung
WiebeTech
WiebeTech FWDD Bedienungsanleitung
WiebeTech
WiebeTech DBD4 Bedienungsanleitung
WiebeTech
WiebeTech RTX400-SJ Bedienungsanleitung
WiebeTech
WiebeTech BayDock 800 Handbuch
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung