WIKA A-10 Bedienungsanleitung

Operating instructions

Betriebsanleitung

Mode d'emploi

Manual de instrucciones

Druckmessumformer, Typ A-10

Pressure transmitter model A-10

Pressure transmitter, model A-10

Transmetteur de pression, type A-10

Transmisor de presión, modelo A-10

2WIKA operating instructions pressure transmitter, model A-10

11218720.15 07/2018 EN/DE/FR/ES

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Lire le mode d‘emploi avant de commencer toute opération !

A conserver pour une utilisation ultérieure !

¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!

¡Guardar el manual para una eventual consulta!

Betriebsanleitung Typ A-10 Seite 25 - 46

Operating instructions model A-10 Page 3 - 24

Mode d‘emploi type A-10 Page 47 - 68

Manual de instrucciones modelo A-10 Página 69 - 91

3WIKA operating instruction pressure transmitter, model A-10

11218720.15 07/2018 EN/DE/FR/ES

Contents

Declarations of conformity can be found online at www.wika.com

Contents

1. General information 4

2. Design and function 5

3. Safety 6

4. Transport, packaging and storage 8

5. Commissioning, operation 9

6. Faults 12

7. Maintenance and cleaning 14

8. Dismounting, return and disposal 15

9. Specications 17

4WIKA operating instruction pressure transmitter, model A-10

11218720.15 07/2018 EN/DE/FR/ES

1. General information

■

The instrument described in the operating instructions has been designed and manufactured using state-of-the-

art technology. All components are subject to stringent quality and environmental criteria during production. Our

management systems are certied to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the instrument.Working safely requires that

all safety instructions and work instructions are observed.

■

Observe the relevant local accident prevention regulations and general safety regulations for the instrument’s range

of use.

■

The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and

readily accessible to skilled personnel at any time. Pass the operating instructions on to the next operator or owner

of the instrument.

■

Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modications.

■

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: PE 81.60

- Application consultant: Tel.: +49 9372 132-0

Fax: +49 9372 132-406

info@wika.com

5WIKA operating instruction pressure transmitter, model A-10









11218720.15 07/2018 EN/DE/FR/ES

2. Design and function

2.1 Overview

Electrical connection (depending on version)

Case; product label

Process connection, spanner flats

Process connection, thread

2.2 Scope of delivery

■

Pressure transmitter

■

Operating instructions

Cross-check scope of delivery with delivery note.

6WIKA operating instruction pressure transmitter, model A-10

11218720.15 07/2018 EN/DE/FR/ES

3. Safety

3.1 Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light injuries or damage to property or the

environment, if not avoided.

Information

... points out useful tips, recommendations and information for ecient and trouble-free operation.

3.2 Intended use

The pressure transmitter is used for measuring pressure.The measured pressure is output as an electrical signal.

This is a class B instrument for emissions and is intended for use in industrial environments. In other environments,

e.g. residential or commercial installations, it can interfere with other equipment under certain conditions. In such

circumstances the operator is expected to take the appropriate measures.

Only use the pressure transmitter in applications that lie within its technical performance limits (e.g. max. ambient

temperature, material compatibility, ...).

→ For performance limits see chapter 9 “Specications”.

The instrument has been designed and built solely for the intended use described here, and may only be used

accordingly.

The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.

7WIKA operating instruction pressure transmitter, model A-10

11218720.15 07/2018 EN/DE/FR/ES

3. Safety

3.3 Personnelqualication

Skilled personnel

Skilled personnel, authorised by the operator, are understood to be personnel who, based on their technical training,

knowledge of measurement and control technology and on their experience and knowledge of country-specic regula-

tions, current standards and directives, are capable of carrying out the work described and independently recognising

potential hazards.

3.4 Labelling, safety marks

Product label

S# Serial no. Coded manufacture date

P# Product no. Pin assignment

Measuring range Non-linearity

Output signal Total current consumption

Approvals Power supply

Before mounting and commissioning the instrument, ensure you read the operating instructions!

DC voltage











Model A-10

0 ... 10 bar

www.wika.com Made in Germany

0 ... 10 bar



8WIKA operating instruction pressure transmitter, model A-10

11218720.15 07/2018 EN/DE/FR/ES

4. Transport, packaging and storage

4.1 Transport

Check the pressure transmitter for any damage that may have been caused during transportation.

Obvious damage must be reported immediately.

4.2 Packaging and storage

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during transport (e.g. change in installation site, sending for

repair).

Permissible conditions at the place of storage:

■

Storage temperature: -40 ... +70 °C

■

Humidity: 45 ... 75 % relative humidity (no condensation)

9WIKA operating instruction pressure transmitter, model A-10

11218720.15 07/2018 EN/DE/FR/ES

5. Commissioning, operation

5.1 Mounting the instrument

Only use the pressure transmitter if it is in perfect condition with respect to safety.

Prior to commissioning, the pressure transmitter must be subjected to a visual inspection.

■

Leaking uid is indicative of damage.

Requirements for mounting point

The mounting point must meet the following conditions:

■

Sealing faces are clean and undamaged.

■

Sucient space for a safe electrical installation.

■

For information on tapped holes and welding sockets, see Technical information IN 00.14 at www.wika.com.

■

Permissible ambient and medium temperatures remain within the performance limits. Consider possible restrictions

on the ambient temperature range caused by mating connector used.

→ For performance limits see chapter 9 “Specications”

Sealing variants

Parallel threads

Seal the sealing face with flat gasket, lens-type

sealing ring or WIKA profile sealing.

per EN 837 per DIN 3852-E



Tapered threads

Wrap threads with sealing material (e.g. PTFE

tape).

NPT, R and PT

10 WIKA operating instruction pressure transmitter, model A-10

11218720.15 07/2018 EN/DE/FR/ES

Mounting the instrument

The max. torque depends on the mounting point (e.g. material and shape). If you have any questions,

please contact our application consultant.

→ For contact details see chapter 1 “General information” or the back page of the operating instructions.

1. Seal the sealing face (→ see “Sealing variants”).

At the mounting point, screw the pressure transmitter in hand-tight.

Tighten with a torque spanner using the spanner ats.

5.2 Connecting the instrument to the electric system

Requirements for voltage supply

→ For power supply see product label

The power supply for the pressure transmitter must be made via an energy-limited electrical circuit in accordance with

section 9.3 of UL/EN/IEC 61010-1, or an LPS per UL/EN/IEC 60950-1, or class 2 in accordance with UL1310/UL1585

(NEC or CEC).The voltage supply must be suitable for operation above 2,000 m should the pressure transmitter be

used at this altitude.

Requirements for electrical connection

■

Cable diameter matches the cable bushing of the mating connector.

■

Cable gland and seals of the mating connector are correctly seated.

■

With cable outlets, no humidity can ingress at the cable end.

Requirement for shielding and grounding

The instrument must be connected to the equipotential bonding of the plant.The connection is made via the process

connection of the instrument.

Connecting the instrument

1. Assemble the mating connector or cable outlet.

→ For pin assignments see product label

Establish the plug connection.

5. Commissioning, operation

Andere Handbücher für A-10

Inhaltsverzeichnis

Sprachen:

Andere WIKA Sender Handbücher

WIKA

WIKA air2guide A2G-50 Bedienungsanleitung

WIKA

WIKA F-20 Bedienungsanleitung

WIKA

WIKA UPT-20 Installationshandbuch

WIKA

WIKA IS-3 Bedienungsanleitung

WIKA

WIKA A-10 Bedienungsanleitung

WIKA

WIKA CPT-2x series Bedienungsanleitung

WIKA

WIKA T31 Bedienungsanleitung

WIKA

WIKA GDT-20 Bedienungsanleitung

WIKA

WIKA CPT-2x series Bedienungsanleitung

WIKA

WIKA OBSOLETE DELTA-trans Bedienungsanleitung

WIKA

WIKA GD10 Bedienungsanleitung

WIKA

WIKA E-10 Bedienungsanleitung

WIKA

WIKA ls-10 Bedienungsanleitung

WIKA

WIKA IPT-10 Bedienungsanleitung

WIKA

WIKA E-11 Bedienungsanleitung

WIKA

WIKA T53.10 Merkblatt

WIKA

WIKA T32.1S Bedienungsanleitung

WIKA

WIKA GDT-20 Bedienungsanleitung

WIKA

WIKA AC-1 Bedienungsanleitung

WIKA

WIKA MH-1 Bedienungsanleitung

WIKA

WIKA T15 series Bedienungsanleitung

WIKA

WIKA IPT-11 Bedienungsanleitung

WIKA

WIKA E-10 Bedienungsanleitung

WIKA

WIKA IPT-1 series Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung