Wildgame N2E Bedienungsanleitung

Model # N2E

602 Fountain Parkway

Grand Prairie, TX 75050

800.847.8269

“Wildgame Innovations”and the “Button Logo”are TM trademarks of Wildgame Innovations, LLC.

“Sport Responsible” , “Redux” and “Flextime”are TM trademarks of WGI Innovations, LTD. User’s Manual

Infrared Digital Scouting Camera

Includes

Features

USB Cable

2 - Bungee Cords User Manual

Camera UnitFlextime Player

Software

RESOLUTION

FLASH

FLASH RANGE

SENSOR

SENSOR RANGE

IMAGE FORMAT

MEMORY

USB

IMAGE RESOLUTION

POWER SUPPLY

AUXILIARY POWER

BATTERY LIFE

ONBOARD POWER

HOUSING

MOUNTING

REDUX

2 MP

18 High Intensity Infrared LED’s

up to 45 feet

Passive Infrared Sensor (PIR) Motion and Heat

up to 60 feet

JPEG - Digital Still

up to 32GB SD Card (not included)

5-PIN Mini USB style - included

2MP

4 C-Cell batteries (not included)

External power port

Estimated up to 3 months (in PIR mode)

Battery life may be reduced in Flextime mode

(depending on Flextime settings)

Built in battery to retain Time and Settings

Weather resistant with rubber gaskets

2 Bungee cords - included

Technology to reduce motion blur during

transition time

page 1

page 2

NOTE: Flextime Player Software is optional.

Flextime files can be played by using most

media players.

Includes

Features

USB Cable

2 - Bungee Cords User Manual

Camera UnitFlextime Player

Software

RESOLUTION

FLASH

FLASH RANGE

SENSOR

SENSOR RANGE

IMAGE FORMAT

MEMORY

USB

IMAGE RESOLUTION

POWER SUPPLY

AUXILIARY POWER

BATTERY LIFE

ONBOARD POWER

HOUSING

MOUNTING

REDUX

2 MP

18 High Intensity Infrared LED’s

up to 45 feet

Passive Infrared Sensor (PIR) Motion and Heat

up to 60 feet

JPEG - Digital Still

up to 32GB SD Card (not included)

5-PIN Mini USB style - included

2MP

4 C-Cell batteries (not included)

External power port

Estimated up to 3 months (in PIR mode)

Battery life may be reduced in Flextime mode

(depending on Flextime settings)

Built in battery to retain Time and Settings

Weather resistant with rubber gaskets

2 Bungee cords - included

Technology to reduce motion blur during

transition time

page 1

page 2

NOTE: Flextime Player Software is optional.

Flextime files can be played by using most

media players.

Installing Batteries

Open the door at the bottom of the camera by

unlatching the locking tabs.

With the camera facing open, open the battery

compartment cover by sliding the latch to the

left. (Illustration A and B)

With the bottom of the camera

towards you, load two C-cell batteries

with the positive ends towards you in

the left battery chamber and load two

C-cell batteries with the negative

ends towards you in the right battery

chamber.

Close battery compartment cover. To

latch the cover simply pull the latch

slightly to the left as you close the

battery compartment cover.

Load SD memory card (up to 32GB not

included) into the SD card slot with the

connectors facing up.

Illustration A

Illustration B

POWER

TIPS:

Make sure the SD Card is unlocked (small

switch on the side of the SD Card) or the

camera LCD will read “LOCK”.

page 3

page 4

Installing Batteries

Open the door at the bottom of the camera by

unlatching the locking tabs.

With the camera facing open, open the battery

compartment cover by sliding the latch to the

left. (Illustration A and B)

With the bottom of the camera

towards you, load two C-cell batteries

with the positive ends towards you in

the left battery chamber and load two

C-cell batteries with the negative

ends towards you in the right battery

chamber.

Close battery compartment cover. To

latch the cover simply pull the latch

slightly to the left as you close the

battery compartment cover.

Load SD memory card (up to 32GB not

included) into the SD card slot with the

connectors facing up.

Illustration A

Illustration B

POWER

TIPS:

Make sure the SD Card is unlocked (small

switch on the side of the SD Card) or the

camera LCD will read “LOCK”.

page 3

page 4

Power Save

Power On

Setting Time

Test Mode

Check the battery level icon to ensure

the batteries just installed contain the

proper charge level. If so, you are ok to

proceed with camera use.

To turn the unit ON press and release

the power button.

1. To change date and time, start by

pressing and release the center

navigation button to set the hour.

2. Press the left or right navigation

button to go up or down in sequence.

3. When the hour is set, repeat steps 1

and 2 to set the minutes.

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

page 5

page 6

NOTE: LCD cycle through camera

information. PIR picture number >

Flextime number > Remaining

pictures > Time

After 30 seconds without any buttons

being pushed, the LCD will turn off and

camera enters into Power Save or

Ready Mode.

The LCD screen can be awakened by

pressing the Power button briefly.

Note: The LCD will not “wake up” when

camera is writing to memory.

PIR LED Status Light: During the first

2 minutes of Ready Mode, the red light

will illuminate when a PIR event is

triggered. The red light will blink for

2-3 seconds when photo is taken

during this first 2 minutes. After 2

minutes all indicator lights will turn

off until a button is pressed.

1. LCD Ready Mode: The camera will

automatically enter Ready Mode if a

button is not pressed for greater than

30 seconds. The status lights will

illuminate for a total of 2 minutes.

Power Save

Power On

Setting Time

Test Mode

Check the battery level icon to ensure

the batteries just installed contain the

proper charge level. If so, you are ok to

proceed with camera use.

To turn the unit ON press and release

the power button.

1. To change date and time, start by

pressing and release the center

navigation button to set the hour.

2. Press the left or right navigation

button to go up or down in sequence.

3. When the hour is set, repeat steps 1

and 2 to set the minutes.

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

page 5

page 6

NOTE: LCD cycle through camera

information. PIR picture number >

Flextime number > Remaining

pictures > Time

After 30 seconds without any buttons

being pushed, the LCD will turn off and

camera enters into Power Save or

Ready Mode.

The LCD screen can be awakened by

pressing the Power button briefly.

Note: The LCD will not “wake up” when

camera is writing to memory.

PIR LED Status Light: During the first

2 minutes of Ready Mode, the red light

will illuminate when a PIR event is

triggered. The red light will blink for

2-3 seconds when photo is taken

during this first 2 minutes. After 2

minutes all indicator lights will turn

off until a button is pressed.

1. LCD Ready Mode: The camera will

automatically enter Ready Mode if a

button is not pressed for greater than

30 seconds. The status lights will

illuminate for a total of 2 minutes.

Setting Date

Trigger Flextime

Location

1. Press the center navigation button

after setting the minute to change the

Day.

2. Press the left or right navigation

button to go up or down in sequence.

3. When the DAY is set, repeat steps 1

and 2 to set the Month and Year.

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

1. Press the center navigation button

while Location is selected. The first

character will be blinking.

1. Press the center navigation button

while Trigger is selected. The

highlighted option will be blinking.

TRIGGER:

PIR MODE: Takes a photo only when the

PIR sensor is triggered.

FLEXTIME (Time Lapse): Takes constant

photos at set times throughout the day,

depending on your Flextime settings.

The Interval setting is set by the Delay

Setting on the camera with a 1 minute

minimum Flextime delay. See chart on

the next page for Flextime options.

NOTE: Camera needs at least 48 hours

in the field to acclimate to the environ-

ment for Flextime to function properly.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

2. Press the left or right navigation

button to go up or down in sequence.

Press the center navigation button

when the character shown is what you

want and move to the next character.

3. Repeat steps 1 and 2 to set the rest of

the characters. Press the center

navigation button to skip spaces and

save the location name.

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

1. Press the center navigation button

while Flextime is selected. The

highlighted option will be blinking.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

POWER

page 7

page 8

Setting Date

Trigger Flextime

Location

1. Press the center navigation button

after setting the minute to change the

Day.

2. Press the left or right navigation

button to go up or down in sequence.

3. When the DAY is set, repeat steps 1

and 2 to set the Month and Year.

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

1. Press the center navigation button

while Location is selected. The first

character will be blinking.

1. Press the center navigation button

while Trigger is selected. The

highlighted option will be blinking.

TRIGGER:

PIR MODE: Takes a photo only when the

PIR sensor is triggered.

FLEXTIME (Time Lapse): Takes constant

photos at set times throughout the day,

depending on your Flextime settings.

The Interval setting is set by the Delay

Setting on the camera with a 1 minute

minimum Flextime delay. See chart on

the next page for Flextime options.

NOTE: Camera needs at least 48 hours

in the field to acclimate to the environ-

ment for Flextime to function properly.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

2. Press the left or right navigation

button to go up or down in sequence.

Press the center navigation button

when the character shown is what you

want and move to the next character.

3. Repeat steps 1 and 2 to set the rest of

the characters. Press the center

navigation button to skip spaces and

save the location name.

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

Ready

Time/Date

Location

Trigger

Flextime

PIR Active

Delay

PIR Mode

Flextime

P1 P2

Interval

24Hr Day Night

30sec 1min 2min 5min

POWER

1. Press the center navigation button

while Flextime is selected. The

highlighted option will be blinking.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

POWER

page 7

page 8

PIR Active

1. Press the center navigation button

while PIR Active is selected. The

highlighted option will be blinking.

PIR ACTIVE:

24 HR: The PIR can be active at all

times.

DAY: The PIR can be active in

daylight hours only.

NIGHT: The PIR can be active in

nighttime hours only.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

POWER

Delay

1. Press the center navigation button

while Delay is selected. The

highlighted option will be blinking.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

POWER

FLEXTIME™

Time Lapse Technology

page 9

page 10

Flextime period:

1. 15 min before Sunrise

to 1 hour after Sunrise.

2. 1 hour before Sunset

to 15 min after Sunset

Flextime period:

1. 15 min before Sunrise

to 1 hour after Sunrise.

2. 1 hour before Sunset

to 15 min after Sunset

Flextime period:

1. 15 min before Sunrise

to 15 min after Sunset

1 HOUR

AFTER

SUNRISE

1 HOUR

BEFORE

SUNSET

15 MINUTES

BEFORE

SUNRISE

15 MINUTES

AFTER

SUNSET

FLEX

TIME FLEX

TIME

FLEX

TIME FLEX

TIME

PIR

INACTIVE

Camera is inactive before and after Flextime periods. Flextime is active twice a day.

Flextime is active twice a day.

Flextime is active during daytime.

Camera is in PIR mode before and after Flextime periods.

INACTIVE

PIR

FLEXTIME

PIR PIR

FLEXTIME selected

INTERVAL

DELAY: The time before the

camera is able to take another

picture.

PIR Mode: minimum 15s

FLEXTIME Mode: minimum 1

minute

Inhaltsverzeichnis

Andere Wildgame Scouting-Kamera Handbücher

Wildgame

Wildgame Titan Extreme Bedienungsanleitung

Wildgame

Wildgame DRT Extreme Bedienungsanleitung

Wildgame

Wildgame N6E Bedienungsanleitung

Wildgame

Wildgame Edge Bedienungsanleitung

Wildgame

Wildgame 360 Cam Bedienungsanleitung

Wildgame

Wildgame KICKER Bedienungsanleitung

Wildgame

Wildgame IR2 Installations- und Betriebshandbuch

Wildgame

Wildgame L10b5 Bedienungsanleitung

Wildgame

Wildgame W6EF Bedienungsanleitung

Wildgame

Wildgame r12i20 Bedienungsanleitung

Wildgame

Wildgame Prizm Bedienungsanleitung

Wildgame

Wildgame Razor Bedienungsanleitung

Wildgame

Wildgame SC20B20-7 Bedienungsanleitung

Wildgame

Wildgame C8B5 Bedienungsanleitung

Wildgame

Wildgame SC20i20-7 Bedienungsanleitung

Wildgame

Wildgame WRAITH Bedienungsanleitung

Wildgame

Wildgame KP10B8-7 Bedienungsanleitung

Wildgame

Wildgame Cloak Pro Bedienungsanleitung

Wildgame

Wildgame Innovations Terra Extreme Bedienungsanleitung

Wildgame

Wildgame C8B5-7 Bedienungsanleitung

Wildgame

Wildgame I6 Bedienungsanleitung

Wildgame

Wildgame FZ12 Bedienungsanleitung

Wildgame

Wildgame t5i20 Bedienungsanleitung

Wildgame

Wildgame TITAN Bedienungsanleitung

Beliebte Scouting-Kamera Handbücher anderer Marken

Nestbox

Nestbox C13 Bedienungsanleitung

Wildview

Wildview STC-TGL1 Bedienungsanleitung

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Bedienungsanleitung

Suntek

Suntek HC-800M Bedienungsanleitung

Spypoint

Spypoint G4 Bedienungsanleitung

Duramaxx

Duramaxx 10029765 Bedienungsanleitung

Brecom

Brecom C2400 Bedienungsanleitung

BlazeVideo

BlazeVideo A280W Bedienungsanleitung

Bestok

Bestok 5210GM Bedienungsanleitung

GardePro

GardePro X60P Bedienungsanleitung

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Bedienungsanleitung

PNI

PNI HUNTING 280C Bedienungsanleitung

Muddy

Muddy Pro-Cam 14 Bedienungsanleitung

Bresser

Bresser 3310006 Bedienungsanleitung

Recon Outdoors

Recon Outdoors HS410 Bedienungsanleitung

Braun

Braun 57660 Bedienungsanleitung

Hieha

Hieha WiFi900Pro Montageanleitung

Bushnell

Bushnell 119437 Bedienungsanleitung