Williams Sound Digi-Wave DLT-100 Bedienungsanleitung

DLT-100 User Guide

What’s included with DLT-100

①DLT-100

②USB Cable

③Adaptor

④Plug 1 (Europe)

⑤Plug 2 (England)

⑥Plug 3 (Australia)

①②

③④⑤⑥

Location of Controls

Function Button

LED

LCD Display

Speaker

⑤External Mic. Jack(3.5mm)

⑥External Headphone Jack(3.5mm)

Microphone Ipod connector (30Pin)

Reset Button

Simultaneous Interpretation Mode

Press and hold power button

for 2 seconds to turn DLT-

100 on

1. Setting procedure for Interpretation Mode

Press No and Yes button

together for 2 second Mode icon will blink on

LCD

Press ( +) or (– )button

to select mode

Press (-) button, the mode will be

changed in above sequence.

Press (+) button, reverse sequence.

Main Speaker

Interpreter

AP(relay)

Receiver only

Note

In Interpretation Mode 3

different mode can be used as

shown in left side. Each has

different role but they all can

be used un Interpretation

system

Simultaneous Interpretation Mode

1. Setting procedure for Interpretation Mode

Press mode button to

select interpretation

mode

When mode selection is

made then SLV icon will

blink

Press ( +) or (– )button

to select SLV or MAS

SLV- Slave

MAS-Master

Press ( +) or (– )button

to select transmitting

channel number

Press mode button to

select SLV or MAS

Note

When channel number is at

No.1, (-) button will not work

Press mode button to

select channel number

When channel number

selection is made then

Group icon will blink and

number will be shown

Press ( +) or (– )button

to select group number

Simultaneous Interpretation System

1.Setting procedure for Interpretation System

Press mode button to

select group number

Note

If your unit is set

to MAS go to next page

Skip procedure 12

and do procedure 13 Press No and Yes button

together for 2 second to

complete setting

Final setting for slave unit

Simultaneous Interpretation System

1.Setting procedure for Interpretation System

Press mode button to

select group number

Press No and Yes button

together for 2 second to

complete setting

Final setting for Master unit

Press ( +) or (– )button

to adjust minute

When group number

selection is made then

number of hour will blink

Press mode button to

complete Hour setting

Note:

1.Master and Slave unit must have same group number

2.Transmitting Channel must be set different

3.Must have one master in a group

Press ( +) or (– )button

to adjust Hour

Simultaneous Interpretation Mode

CASE1) Interpreter -3 units

Receiver – 20 units

English

Ch1 Chinese

Ch2 Korean

Ch3

Select Channel and Listen

CASE2)

Main Speaker

is set to

“0” Channel

Main Speaker -1 units

Interpreter – 2 units

Receiver – 20 units

Interpreter -A

Ch1

Interpreter –B

Ch2

Select Channel and Listen

CASE3)

Interpreter-1 units

AP(Relay) – 1 units

Receiver – 20 units

Interpreter -A

Ch1

AP (=Repeater)

Extend the

distance

Two-way tour guide mode (conference

mode)

Two-way tour guide mode (conference

mode)

Press and hold power button

for 2 seconds to turn DLT-

100 on

2. Setting procedure for Two-way tour guide mode(conference mode)

ÆMode change from interpretation to Two-way tour guide mode

Press No and Yes button

together for 2 second Mode icon will blink on

LCD

Press ( +) or (– )button

to select mode

Press (-) button, the mode will be

changed in above sequence.

Press (+) button, reverse sequence.

Press mode button to

select tour guide system

When mode selection is

made then CHAIRMAN

SLV will blink

Press ( +) or (– )button

to select CHAIRMAN

/SLV, CHAIRMAN

/MAS,

SLV

Select tour

guide system

Andere Handbücher für Digi-Wave DLT-100

Inhaltsverzeichnis

Andere Williams Sound Transceiver Handbücher

Williams Sound

Williams Sound Digi-Wave 400 Series Bedienungsanleitung

Williams Sound

Williams Sound Digi-Wave DLT-100 Bedienungsanleitung

Williams Sound

Williams Sound Digi-Wave DLT-100 Bedienungsanleitung

Williams Sound

Williams Sound DLT 300 Bedienungsanleitung

Williams Sound

Williams Sound DLR 60 2.0 Bedienungsanleitung

Williams Sound

Williams Sound DLT 100 2.0 Bedienungsanleitung

Williams Sound

Williams Sound Digi-Wave 300 Series Bedienungsanleitung

Williams Sound

Williams Sound Digi-Wave 400 Series Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung