Wincomm WMP-153 Bedienungsanleitung

WMP-153

Medical Panel PC

USER’S MANUAL

P/N: 205G000WMP1530, V1.0

All other brand names are registered trademarks of their respective owners.

The information contained in this document is subject to change without notice

WMP-153 User’s manual

Version Change History

Date

Version

Description

Remark

2015/6/25

1.0

First release

James

WMP-153 User’s manual

iii

Acknowledgments

Intel® Atom processor is registered trademarks of Intel®

Corporation.

IBM, PC/AT, PS/2 are trademarks of International Business

Machines Corporation.

Microsoft®

Windows is a registered trademark of Microsoft®

Corporation.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

C&T is a trademark of Chips and Technologies, Inc.

UMC is a trademark of United Microelectronics Corporation.

ITE is a trademark of Integrated Technology Express, Inc.

Intel is a trademark or registered trademark of Intel

Corporation.

Microsoft Windows is a registered trademark of Microsoft

Corporation.

Winbond is a registered trademark of Winbond Electronics

Corporation.

All other product names or trademarks are properties of

their respective owners.

WMP-153 User’s manual

FCC Class B

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a residential environment.

This equipment generates, uses and can radiate radio frequency energy. If

not installed and used in accordance with this user manual, it may cause

harmful interference to radio communications.

Note that even when this equipment is installed and used in accordance

with this user manual, there is still no guarantee that interference will not

occur. If this equipment is believed to be causing harmful interference to

radio or television reception, this can be determined by turning the

equipment on and off. If interference is occurring, the user is encouraged

to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and the receiver

Connect the equipment to a power outlet on a circuit different from

that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

Warning:

Any changes or modifications made to the equipment which are

not expressly approved by the relevant standards authority could

void your authority to operate the equipment.

To avoid risk of electric shock, this equipment must only be

connected to a supply mains with protective earth.

Do not modify this equipment without authorization of the

manufacturer.

WMP-153 User’s manual

Safety Instructions

Intended use

The WMP-153 is intended to serve as a medical monitor which is

designed for general purpose for hospital environment and for

diagnosis. It could be used for Surgical, Radiology, PACS (Picture

Archiving Communication Systems), LIS (Lab Information

Systems) and Electronic Medical Record purpose. It shall not be

used for life-supporting system.

WARNING: Critical diagnostic decision must not be based solely

on images displayed by this device

Greeting & Setup

Thank you for purchasing the WMP-153 unit. We wish that this

unit will be durable and reliable in providing your medical

application needs. Please follow the instructions below to ensure

the unit continues to have high performance.

Unpacking

After opening the carton, there will be a medical panel PC unit

with an accessory box. Examine the contents to see if there are

damages to the unit and if all accessories are present.

Setting up

Please read this manual carefully and remember to keep this

manual for future reference.

Safety Instructions & Cleaning

The unit has undergone various tests in order to comply with

safety standards. Inappropriate use of the open frame unit may

be dangerous. Please remember to follow the instructions below

to insure your safety during the installation and operating

process.

Transporting & Placement of unit

1. When moving the unit on a cart; be very cautious. Quick

stops, excessive forces and uneven surfaces may cause

the cart to overturn thus risking the unit to fall to the

ground.

WMP-153 User’s manual

2. If the medical panel PC unit does fall to the ground,

immediately turn the power off and disconnect cords. Then

contact a service technician for repairs. Continual use of

the unit may result cause a fire or electric shock. Also, do

not repair the unit on your own.

3. Having two or more people transporting the display unit is

recommended. In addition, when installing the unit by

suspending it also requires two or more people.

4. Before suspending the unit, make sure the material used

for suspension is sturdy and stable. If not properly

suspended, the display unit may fall and cause serious

injury to people standing nearby as well as to the unit

itself.

5. If you wish to mount the display unit, remember to use

only the mounting hardware recommended by the

manufacturer.

Electrical and Power Source Related

1. This medical panel PC unit must operate on a power source

as shown on the specification label. If you are not sure

what type of power supply used in the area, consult your

dealer or local power supplier.

2. The power cords must not be damaged. Applied pressure,

added heat, and tugging may damage the power cord.

3. The power cord must be routed properly when setup takes

place. We advise that this aspect measure is to prevent

people from stepping on the cords or while the unit is

suspended to prevent flying objects from getting tangled

with the unit.

4. Do not overload the AC outlets or extension cords.

Electrical shocks or fires may occur from overloading.

5. Do not touch the power source during a thunderstorm.

6. If your hands are wet, do not touch the plug.

7. Use your thumb and index finger, grip firmly on the power

cord to disconnect from the electrical socket. By pulling the

power cord, may result in damaging it.

WMP-153 User’s manual

vii

8. If the unit is not going to be in use for an extended period

of time, remember to disconnect the unit.

9. The medical panel PC unit uses voltage between

100-240VAC. Connect the unit to a power source with the

same numerical value as shown. Please use only the power

cord provided by the dealer to ensure safety and EMC

compliance.

Various Factors of Environment

1. Do not insert objects into the openings.

2. Do not have liquids seep into the internal areas of the

medical panel PC unit.

3. Having liquids seep in or inserting objects into the unit

may result in electric shocks from taking and/or short

circuiting the internal parts.

4. Do not place the medical panel PC unit in the presence of

high moisture areas.

5. Do not install the medical panel PC unit in a wet

environment.

6. Do not place near unit near heat generating sources.

7. Do not place the unit in a location where it will come in

contact with fumes or steam.

8. Remember to keep the medical panel PC unit away from

the presence of dust.

9. If water has flow in or seep in, immediately disconnect the

open frame unit. Then contact a service technician for

repairs.

Ventilation Spacing

1. Do not cover or block the openings on the top and back

sides of the display unit. Inadequate ventilation may cause

overheating thus reducing the lifespan of the unit.

2. Unless proper ventilation is present, do not place unit in an

enclosed area; such as a built-in shelf. Keep a minimum

distance of 10 cm between the display unit and wall.

WMP-153 User’s manual

viii

Cleaning the unit

1. Remember to turn off the power source and to unplug the

cord from the outlet before cleaning the unit.

2. Carefully dismount the unit or bring the unit down from

suspension to clean.

3. Please use a dry soft cloth to clean the unit.

4. Take a dry cloth and wipe the unit dry. Remember to avoid

having liquids seep into the internal components and areas

of the medical panel PC unit.

Servicing, Repairing, Maintenance & Safety Checks

1. If the unit is not functioning properly, observe the

performance level of the display closely to determine what

type of servicing is needed.

2. Do not attempt to repair the medical panel PC unit on your

own. Disassembling the cover exposes users’ to high

voltages and other dangerous conditions. Notify and

request a qualified service technician for servicing the unit.

3. To avoid risk of electric shock, this equipment must only be

connected to a supply mains with protective earth.

4. If any of the following situations occur turn the power

source off and unplug the unit. Then contact a qualified

service technician.

(a) A liquid was spilled on the unit or objects have fallen

into the unit.

(b) The unit is soaked with liquids.

(d) If smoke or strange odor is flowing out of the operating

unit.

(e) If the power cord or plug is damaged.

(f) When the functions of the unit are dysfunctional.

5. When replacement parts are needed for the medical panel

PC unit, make sure service technicians use replacement

parts specified by the manufacturer, or those with the

same characteristics and performance as the original

WMP-153 User’s manual

parts. If unauthorized parts are used it may result in

starting a fire, electrical shock and/or other dangers.

ISO 7000-0434 : Caution, consult ACCOMPANYING

DOCUMENTS.

ISO 7000-1641 : Follow operating instructions or

Consult instructions for use.

IEC 60417 -5009 : STAND-BY.

IEC 60417-5031 : Direct current.

EU-wide legislation, as implemented in each

Member State, requires that waste electrical and

electronic products carrying the mark (left) must be

disposed of separately from normal household

waste. This includes monitors and electrical

accessories, such as signal cables or power cords.

When you need to dispose of your display products,

please follow the guidance of your local authority, or

ask the shop where you purchased the product, or if

applicable, follow any agreements made between

yourself.

The mark on electrical and electronic products only

applies to the current European Union Member

States.

WMP-153 User’s manual

When networking with electrical devices, the operator is

responsible for ensuring that the resulting system meets the

requirements set forth by the following standards:

–EN 60601-1 (IEC 60601-1)

Medical electrical equipment

Part 1: General requirements for safety

–EN 60601-1-1 (IEC 60601-1-1)

Medical electrical equipment

Part 1-1: General requirements for safety

Collateral standard: Safety requirements for

Medical electrical systems

–EN 60601-1-2 (IEC 60601-1-2)

Medical electrical equipment

Part 1-2: General requirements for safety

Collateral standard: Electromagnetic compatibility;

Requirements and tests

Accessory equipment

connected to the

analog and digital

interfaces must be in

compliance with the

respective nationally

harmonized IEC

standards (i.e. IEC 60950 for data processing equipment, IEC

60065 for video equipment, IEC 61010-1 for laboratory

equipment, and IEC 60601-1 for medical equipment.)

Furthermore all configurations shall comply with the system

standard IEC 60601-1-1. Everybody who connects additional

equipment to the signal input part or signal output part

configures a medical system, and is therefore, responsible that

the system complies with the requirements of the system

standard IEC 60601-1-1. The unit is for exclusive interconnection

with IEC 60601-1 certified equipment in the patient environment

and IEC 60XXX certified equipment outside of the patient

environment. If in doubt, consult the technical services

department or your local representative.

Inhaltsverzeichnis

Andere Wincomm Touchscreen Handbücher

Wincomm

Wincomm WTP-9E66-15 Bedienungsanleitung

Wincomm

Wincomm WTP-8866-15 Bedienungsanleitung

Wincomm

Wincomm WMP-24C Bedienungsanleitung

Wincomm

Wincomm WTP-9A66 Series Bedienungsanleitung

Wincomm

Wincomm WMP-248 Bedienungsanleitung

Wincomm

Wincomm WMP-226(V) Bedienungsanleitung

Wincomm

Wincomm WMP-17F Bedienungsanleitung

Wincomm

Wincomm WMP-19B Bedienungsanleitung

Wincomm

Wincomm WTP-8B66 Series Bedienungsanleitung

Wincomm

Wincomm WTP-8B66 Series Bedienungsanleitung

Wincomm

Wincomm WTP-9A66 Series Bedienungsanleitung

Wincomm

Wincomm WTP-8B66-15O Bedienungsanleitung

Wincomm

Wincomm WLP-7821-17 Bedienungsanleitung

Wincomm

Wincomm WTP-8865 series Bedienungsanleitung

Wincomm

Wincomm WLP-7A20 Series Bedienungsanleitung

Wincomm

Wincomm WLP-7B20 Series Bedienungsanleitung

Wincomm

Wincomm WTP-8866-19 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung