Windsor Commodore 20 Bedienungsanleitung

86400940-A 06/01/15

Commodore 20 - 115V

Carpet Extractor

Operating Instructions (ENG)

MODELS:

CMD20

10086050

From Serial Number (Ref No1*)

*See Serial Number Page

or call manufacturer

Warranty Registration

Thank you for purchasing a Kärcher North America product. Warranty registration is quick

and easy. Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to :

http://warranty.karcherna.com/

For customer assistance:

1-800-444-7654

286400940 Operators Manual - CMD20

Machine Data Label

Overview

This carpet extractor is an electrical powered carpet extractor intended for commercial use. The appliance sprays

a cleaning solution onto the carpet agitates the wet carpet, and then extracts the soiled solution back into the unit's

recovery tank. The appliance is fitted with and a hand tool for cleaning upholstery and stairs.

Table of Contents

Machine Data Label. . . . . . . . . . . . . . . . . . . . . . . . . .2

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3

How To Use This Manual . . . . . . . . . . . . . . . . . . . . .4

Safety

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . .5

HAZARD INTENSITY LEVEL. . . . . . . . . . . . . . . . . .6

Grounding Instructions . . . . . . . . . . . . . . . . . . . . . . .7

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Operations

Technical Specifications . . . . . . . . . . . . . . . . . . . . .10

Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Drive Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Filling the Solution Tank . . . . . . . . . . . . . . . . . . . . .13

Machine Operation . . . . . . . . . . . . . . . . . . . . . . . . .15

Brush Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . .17

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Accessory Tool Usage . . . . . . . . . . . . . . . . . . . . . .20

Maintenance

Periodic Maintenance . . . . . . . . . . . . . . . . . . . . . . .21

Daily / Regular Maintenance. . . . . . . . . . . . . . . . . .21

Service Schedule . . . . . . . . . . . . . . . . . . . . . . . . . .22

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Suggested Spare Parts. . . . . . . . . . . . . . . . . . . . . .24

86400940 Operators Manual - CMD20

How To Use This Manual

This manual contains the following sections:

• How to Use This Manual

•Safety

• Operations

• Maintenance

The HOW TO USE THIS MANUAL section will tell you

how to find important information for ordering correct

repair parts.

Parts may be ordered from authorized dealers. When

placing an order for parts, the machine model and

machine serial number are important. Refer to the

MACHINE DATA box which is filled out during the

installation of your machine. The MACHINE DATA box

is located on the inside of the front cover of this manual.

The model and serial number of your machine is on the

control panel support arm, located on the back of the

machine.

The SAFETY section contains important information

regarding hazardous or unsafe practices of the

machine. Levels of hazards are identified that could

result in product damage, personal injury, or severe

injury resulting in death.

The OPERATIONS section is to familiarize the operator

with the operation and function of the machine.

The MAINTENANCE section contains preventive main-

tenance to keep the machine and its components in

good working condition. They are listed in this general

order:

• Storage

• Maintenance

• Troubleshooting

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement parts

numbers needed for ordering future parts.

NOTE: The manual part number is located on the

lower right corner of the front cover.

Model:

Date of Purchase:

Serial Number:

Dealer:

Address:

Phone Number:

Sales Representative:

86400940 Operators Manual - CMD20

Safety

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Connect to properly grounded outlet. See Grounding Instructions.

Do not leave the machine unattended. Unplug machine from outlet when not in use and before maintenance or

service.

Use only indoors. Do not use outdoors or expose to rain.

Do not allow machine to be used as a toy. Close attention is necessary when used by or near children.

Use only as described in this manual. Use only manufacturer's recommended components and attachments.

Do not use damaged electrical cord or plug. Follow all instructions in this manual concerning grounding the

machine. If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water,

return it to an authorized service center.

Do not pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord around edges or

corners.

Do not run machine over cord. Keep cord away from heated surfaces.

Do not unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical cord.

Do not handle the electrical plug or machine with wet hands.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

This machine is intended for cleaning carpet only.

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

This machine is not suitable for picking up health endangering dust.

Turn off all control before unplugging.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near

flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices

for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

If foam or liquid comes out of machine, switch off immediately.

READ AND SAVE THESE INSTRUCTIONS

86400940 Operators Manual - CMD20

Safety

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY.

The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating

condition. Following is information that signals some potentially dangerous conditions to the operator or the equip-

ment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the

machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use

manufacturer approved replacement parts.

86400940 Operators Manual - CMD20

Safety

Electrical

In the USA this machine operates on a standard 15

amp 115 volt A.C. power circuit. The amp, hertz, and

voltage are listed on the data label found on each

machine. Using voltages above or below those

indicated on the data label will cause serious damage

to the motors

Extension Cords

If an extension cord is used, the wire size must be at

least one size larger than the power cord on the

machine, and must be limited to 50 feet (15.5m) in

length.

Grounding Instructions

This appliance must be grounded. If it should malfunc-

tion or breakdown, grounding provides a path of least

resistance for electric current to reduce the risk of

electric shock. This appliance is equipped with a cord

having an equipment-grounding conductor and

grounding plug. The plug must be inserted into an

appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordi-

nances.

This appliance is for use on a nominal 120-volt circuit,

and has a grounded plug that looks like the plug illus-

trated in sketch A. A temporary adapter looks like

adapter illustrated in sketches B and C, may be used to

connect this plug to a 2-pole receptacle as shown in

sketch B if a properly grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (sketch A) can be installed by

a qualified electrician. The green colored rigid ear, lug

or the like extending from the adapter must be

connected to a permanent ground such as a properly

grounded outlet box cover. Whenever the adapter is

used, it must be held in place by a metal screw

Improper connection of the equipment-grounding

conductor can result in a risk of electric shock.

Check with a qualified electrician or service person

if you are in doubt as to whether the outlet is

properly grounded. Do not modify the plug

provided with the appliance - if it will not fit the

outlet, have a proper outlet installed by a qualified

electrician.

NOTE: In Canada, the use of a temporary adapter is

not permitted by the Canadian Electrical Code.

USING AN ADAPTOR

GROUNDING CONNECTION

Note: Adaptors are not allowed in Canada.

Outlet

Tab for Grounding

Outlet Box

FIGURE C

Grounded

FIGURE A

Adaptor

Screw

FIGURE B

Adaptor

Metal Screw

Grounded

Grounding Pin

86400940 Operators Manual - CMD20

Safety

Safety Labels

NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become

illegible, promptly replace them.

RISK OF EXPLOSION. DO NOT USE OR PICK UPFLAMMABLE MATERIAL.

TO REDUCE THE RISK OF ELECTRIC SHOCK, USE INDOORSONLY AND ALWAYS INSTALL

FLOAT BEFORE ANY WETP ICK-UPO PERATION.USE ONLY DETERGENTINTENDED

FOR CLEANING CARPETS.

RISQUE D'EXPLOSION. NE PAS UTILISER OU RAMASSER DES MATIÈRES INFLAMMABLES.

POUR RÉDUIRE LE RISQUE D'ÉLECTROCUTION,UTILISER À L'INTÉRIEURSEULEMENT ET

TOUJOURS INSTALLERL E FLOTTEURAVANT TOUTE OPÉRATION DE RAMASSAGE DANS

DES CONDITIONS HUMIDES. UTILISER SEULEMENT DU DÉTERGENT CONÇUPOUR LE

NETTOYAGE DES TAPIS.

WARNING LABEL INCLUDED ON

86396920 CONTROL PANEL LABEL

86400940 Operators Manual - CMD20

Notes

86400940 Operators Manual - CMD20

Operations

Technical Specifications

ITEM DIMENSION/CAPACITY

Electrical 115 V, 15 A, 60 HZ

Electric Propelling Motor (1) –1/4 hp DC (186 watts) with variable speed forward.

Drive system Transaxle unit variable speed Operating Speed: 0-100 ft/min

Electric Vacuum Motor (1) – 3 stage, 1 hp 99 cfm (2.80m?/min.)

Brush (1) 18” (45.8 cm)

Solution Pump 100 psi (6.9 bars), diaphragm style, demand pump

Solution Capacity 20 gallons (75 ltr)

Recovery Capacity 20 gallons (75 ltr)

Brush Speed 1000 RPM

Vacuum Shoe 22” (56 cm) wide, cast urethane floating and pivoting.

Wheels:

Front: (2) 4” dia. (10 cm) wheels by 2.5”

Rear: (2) 10” dia. (25 cm) wheels by 2”

Solution Spray 2 quick change jets

Power Cable 75’ (23m) (12 gauge)

86400940 Operators Manual - CMD20

Andere Handbücher für Commodore 20

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Windsor Bodenreinigungsmaschine Handbücher

Windsor

Windsor STORM SP13 Bedienungsanleitung

Windsor

Windsor COMMODORE CMD Bedienungsanleitung

Windsor

Windsor Saber Glide 86037580 Bedienungsanleitung

Windsor

Windsor ADMIRAL ADM8 10080170 Bedienungsanleitung

Windsor

Windsor Clipper Duo Bedienungsanleitung

Windsor

Windsor MERIT MP13 Bedienungsanleitung

Windsor

Windsor Walk Behind Scrubber SCE326 Bedienungsanleitung

Windsor

Windsor COMDU 1.008-612.0 Bedienungsanleitung

Windsor

Windsor Powertec 20X Bedienungsanleitung

Windsor

Windsor 10080480 Bedienungsanleitung

Windsor

Windsor EXPERT Montageanleitung

Windsor

Windsor passport Bedienungsanleitung

Windsor

Windsor Commodore 20 CMD20 Bedienungsanleitung

Windsor

Windsor QK32 Bedienungsanleitung

Windsor

Windsor Dominator NMWU2215N Technische Daten

Windsor

Windsor SUPREME ULTRA HIGH SPEED BURNISHER P1700120 Fehlerbehebungshandbuch

Windsor

Windsor CB20 Technische Daten

Windsor

Windsor CLP12 Bedienungsanleitung

Windsor

Windsor VOYDU 10086130 Bedienungsanleitung

Windsor

Windsor Chariot 2 CBPS20 Bedienungsanleitung

Windsor

Windsor Saber Glide 30 Bedienungsanleitung

Windsor

Windsor LB1500 Bedienungsanleitung

Windsor

Windsor 10080480 Bedienungsanleitung

Windsor

Windsor CLP12 Technische Daten

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Bedienungsanleitung

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Kärcher

Kärcher B 140 R Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW 750 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Tennant

Tennant 8210D Bedienungsanleitung

Nobles

Nobles Frontier Produkthandbuch

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Tennant

Tennant 215 Produkthandbuch

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Administratorhandbuch

BETCO

BETCO PB24 Bedienungsanleitung

IPC

IPC CT51-71 BT Bedienungsanleitung