Winegard ROADSTAR RS-1000 Bedienungsanleitung

ROADSTAR

RV AND VANTV ANTENNA

MODELS RS-1000

Made in U.S.A.

INSTRUCTIONS

Winegard Company

3000 Kirkwood St., Burlington, IA 52601-2000

Printed in U.S.A. 2451809 © Winegard Company, 1998 Rev. 12/98

WINEGARD®

*Has fixed FM trap to reduce interference.

DESCRIPTION

Winegard's RoadStarTM omnidirectional antenna pro-

vides excellent reception of VHF/UHF TV channels.

The RoadStar compact modern styling is unobtrusive

and blends well with the designs of recreational vehi-

cles. The UV stabilized copolymer housing makes the

antenna virtually impervious to weathering and color

change.

The unique omnidirectional characteristics of model

RS-1000 provide excellent reception in areas where

stationsareindifferentdirectionswithout the needfora

complexrotorsystem.Abuilt-inamplifierprovidesupto

6timesthereceivedsignalonVHFand9timestheUHF

signal insuring the best possible reception in color and

black and white.

TheRS-1000 package includes antenna, 12 VDCpow-

er supply with two-way splitter, 30' downlead cable, 6'

TV set cord, hardware and mounting bracket.

PARTS LIST

1 Amplified Antenna

6 10-32 Hex Nut, Nylock 2160216

1 Power Supply with Hardware 2120143

1 30' Coaxial Cable 2753015

1 6' Coaxial Cable 2753752

3 Roof Mounting Brackets 3720303

6 #10 x 1" Thread Cutting Screws 2160178

1 Bolt, 1-1/4 x 1" Nylon 3200350

1 Mounting Plate 3710248

6 10-32 x 5/8" Bolt 2160173

6 Washer, #10 Aluminum 1140302

SPECIFICATIONS

Bandpass

VHF/FM ............................. 54 to 216 MHz

UHF ................................... 470 to 810 MHz

Amplifier Gain......................

VHF* .................................. 15.5 dB avg.

UHF ................................... 19.5 dB avg.

Impedance ........................... 75ohmunbalanced

Response ............................. 25 dB per 6 MHz

VSWR ................................... 1.8:1 max.

Power Required ................... 12 VDC at 85 ma

Weatherproof Housing........ Weatherable

UV stabilized

copolymer

CLEANING ANTENNA HOUSING

The surface of the antenna is a tough laminated

ultraviolet shield. Clean only with mild soap and

water. Use no solvents, alcohol, or cleaning

fluids.

14-1/2"

11-7/16"



FIGURE 1

STEP 2. Place assembled mount on bottom of antenna

housing and thread in 1" aluminum bolt. Spin the as-

sembled mount to tighten securely.

STEP3.Attachendofcoaxialdownleadcablewithboot

tojackonbottomofantennaandslidebootupoverboot

collar. See Figure 3.

FIGURE 2

FIGURE 4

STEP 4. Select location for antenna on roof of vehicle.

Try to position antenna about 24" from edge of vehicle

roof, convenient to downlead entry point and as far

awayaspossiblefromroofmountedequipmentsuchas

air conditioners or roof vents. See Figure 4.

FIGURE 3

NOTE: Holes for mounting brackets are at corners

of 19-5/8" triangle. We recommend you make a

templatefrom19-5/8"triangularpieceofcardboard.

Try to locate holes on roof rafters on other solid

members inside roof. See Figure 5.

19-5/8" 19-5/8"

19-5/8"

STEP 5. Drill six 1/8" pilot holes as shown in Figure 6.

Applynon-hardeningsiliconecaulkingcompoundaround

holes under each bracket. Attach antenna to roof with

#10 x 1" thread cutting screws.

STEP6. Thepowersupply/walloutletassemblymaybe

flush mounted in most standard electrical boxes. To

flush mount cut a hole in wall to fit the box. Run 2 #12

wiresbetween walloutletand12VDC sourceandroute

downlead cable to this location. Install cable between

set 2 outlet and power supply SET 2 jack at this time.

See Figure 7.

WARNING:DONOTCONNECT12VDCSOURCETO

POWER SUPPLY AT THIS TIME. POWER SUPPLY

MAY SHORT, IF 12 VDC SOURCE IS CONNECTED.

ANTENNA MOUNTING INSTRUCTIONS

STEP 1. Assemble mounting brackets onto mounting

plate. Insert 10-32 x 5/8" bolts through mounting plate

andmountingbrackets.SeeFigure1.Attach#10x9/16

x1/6washersand10-32lockingnuts.Tightensecurely.

FIGURE 6

FIGURE 5

LOCATE HOLE OVER

RAFTERS OR OTHER

SUPPORTS IN ROOF

ROOF MOUNTING

BRACKETS

(3) #10 x 1" THREAD

CUTTING SCREWS

APPLY APPROVED NON-HARDENING

CAULKING COMPOUND UNDER

EACH BRACKET.

STEP7. Installconnectorsondownleadandset2cable

as shown on page 4. Attach antenna downlead cable to

jack on power supply marked “ANT”. See Figure 7.

  

 

FIGURE 8FIGURE 8

FIGURE 8

FIGURE 9FIGURE 9

FIGURE 9

FIGURE 10FIGURE 10

FIGURE 10

FIGURE 11FIGURE 11

FIGURE 11

STEP 9. Mount power supply in wall with screws

provided and attach TV coax cable to jack on front.

ConnectTVcoaxcable to TV set. Move switch on front

of outlet to the left and check that light is on.

CHECKING POWER SUPPLY OPERATION

(Power Supply not supplied with RS-3460)

1. Tune TV receiver to nearest station.

2. Turn off switch on power supply.

Picture on TV receiver should be

considerably degraded with power off.

3. This unit is equipped with a

polyswitch, (current limiting de-

vice), which will shut down 12 VDC

if there is a direct short in the cable

between antenna and power supply.

Red indicator light will not light.

Once short is eliminated, device

will reset itself.

STEP 8. Install terminals on wires from 12 VDC source

asshowninFig.8.CrimpterminalswithCraftsmantype

4 crimping tool in Fig. 9 or equivalent. Push wires onto

tabsonterminalboardasshowninFigure10.Ifindoubt

astothepolarityofthewires,connectthem temporarily

to tabs on circuit board in Fig. 10 and move switch on

frontofoutlettoleft,(inFig.11)iflightcomesonpolarity

is correct.

CONSUMERTWOYEARWARRANTY

Winegard Company warrants this Winegard product against any

defects in materials or workmanship within two years from date of

purchase. No warranty claim will be honored unless at the time the

claim is made, you present proof of purchase to an authorized

Winegard dealer (if unknown, please contact Winegard Company,

3000 Kirkwood Street, Burlington, IA 52601-2000, Telephone 319-

754-0600).

Winegard Company (at its option) will either repair or replace the

defective product at no charge to you. This warranty covers parts,

but does not cover any costs incurred in removal, shipping or

reinstallationoftheproduct.Thislimitedwarrantydoesnotapplyifthe

productisdamaged,deteriorates,malfunctionsorfailsfrom: misuse,

improperinstallation,abuse,neglect,accident,tampering,modification

of the product as originally manufactured by Winegard, usage not in

accordance with product instructions or acts of nature such as

damage caused by wind, lightning, ice or corrosive environments

such as salt spray and acid rain.

The two year warranty is provided on the condition that the

equipment is properly delivered with all handling and freight charges

prepaid to your Winegard dealer for return to our factory for repair

or replacement. Winegard dealers will arrange for the replacement

orrepairandreturntoyouwithoutchargetheproductwhichfaileddue

to defective material or workmanship.

WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES

FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE

BY ANY OTHER PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR

STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A

PARTICULARPURPOSEAND MERCHANTABILITY ARE LIMITED

TO THE TWO YEAR PERIOD OF THIS WARRANTY.

The foregoing shall be the sole and exclusive remedy of any

person,whether in contract, tortorotherwise, and Winegardshallnot

be liable for incidental or consequential damage or commerical loss,

or from any other loss or damage except as set forth above.

Somestatesdonotallowlimitationsonhowlonganimpliedwarranty

lasts, or the exclusion of limitation of incidental or consequential

damages,sotheabovelimitationsorexclusionsmaynotapplytoyou.

Thiswarrantygives youspecificlegalrightsand youmayalso have

other rights which vary from state to state.

INSTALLING COAX CABLE ON

FC-5910 CONNECTORS

STEP 1: Stripouter cover back 1/2"* fromendof cable. Fray braidback

as far as outer cover will allow.

STEP 2: Trim braid close to outer cover and remove 1/4"* of inner

insulation being careful not to nick center conductor. Make sure no

foil or braid can touch center conductor.

STEP 3: Slide connector tip between braid and inner insulation (braid

andfoil, on foilshieldcable)and push connectoroncableas far as itwill

go. Crimp built-in ferrule with appropriate crimping tool. Do Not crush

cable out-of-round.

* If installing in very hot weather, increase these dimensions 1/8".

WHATTO DO WHENYOUR RV/TV ANTENNA IS NOTWORKING PROPERLY

TO TEST SYSTEM

 





 

 

 

 

 

 



HOW YOUR

SYSTEM WORKS

WARNING

DO NOT INSTALL COUPLERS, SPLITTERS, ETC.

BETWEEN THE POWER SUPPLY AND THE AN-

TENNA. INSTALLATION OF ANY ITEM ON THE

DOWNLEAD MAY CAUSE A SHORT IN THE SYS-

TEM.THEDOWNLEADSUPPLIES+12VDCTOTHE

PREAMP IN THE ANTENNA.

HOW YOUR SYSTEM WORKS

Turning power supply on sends +12 VDC up cable to

antenna. Voltage energizes transistors on amplifier in

antenna head. TV signal comes back down cable to

outlets.

TO TEST SYTEM

1. Make sure TV set is working properly.

2. Switch power supply ON and OFF to see if there is a

difference in the picture quality while watching TV. If

there is NO difference, proceed to the next step.

CAUTION

The power supply should be turned OFF when

connecting/disconnecting cables to power supply

andantenna,butshouldbeturnedONwhentesting

for voltage.

3. Disconnect cable from antenna and check for +12

VDC at test point #1. If there is +12 VDC, the power

supply is OK and the antenna needs to be replaced.

4. If there is no +12 VDC at test point #1 reconnect the

cable to antenna. Remove power supply from wall and

visually inspect for burnt/broken parts. If there are any

broken or burnt parts replace power supply.

5.Disconnectcablefromantennajackonpowersupply.

Check for +12 VDC at test point #2. If there is +12 VDC

then there is a problem in the cable connecting the

power supply to the antenna. Repair/ replace cable.

6. If +12 VDC is not present at test point #2, check that

the red indicator is ON. If not, check the polarity of the

red/whitewires and check the +12 VDC source. If there

is still no +12 VDC replace the power supply.

Inhaltsverzeichnis

Andere Winegard Antenne Handbücher

Winegard

Winegard Rayzar.Air RVRZ25W Bedienungsanleitung

Winegard

Winegard YA-1713 Bedienungsanleitung

Winegard

Winegard GM-9000 Bedienungsanleitung

Winegard

Winegard RV-7020 Bedienungsanleitung

Winegard

Winegard Movin' View MV-4000 Bedienungsanleitung

Winegard

Winegard Movin' View MV-0500 Bedienungsanleitung

Winegard

Winegard PROSTAR HD-6000 Bedienungsanleitung

Winegard

Winegard Movin' View MV-0099 Bedienungsanleitung

Winegard

Winegard SENSAR Bedienungsanleitung

Winegard

Winegard Pathway X1 Bedienungsanleitung

Winegard

Winegard TR-6100 Bedienungsanleitung

Winegard

Winegard RoadTrip Mission Bedienungsanleitung

Winegard

Winegard Carryout G2 Bedienungsanleitung

Winegard

Winegard DS-4248 Bedienungsanleitung

Winegard

Winegard Sensar HV CC-10HV Bedienungsanleitung

Winegard

Winegard TRAV'LER SHAW DIRECT SK-7003 Bedienungsanleitung

Winegard

Winegard HD7000R Bedienungsanleitung

Winegard

Winegard FlatWave Micro Bedienungsanleitung

Winegard

Winegard WPM-300 Bedienungsanleitung

Winegard

Winegard RZ-6035 Bedienungsanleitung

Winegard

Winegard Prostar 1000 PR-7010 Bedienungsanleitung

Winegard

Winegard HD7000R Bedienungsanleitung

Winegard

Winegard RAYZAR z1 Bedienungsanleitung

Winegard

Winegard WV750 Bedienungsanleitung

Beliebte Antenne Handbücher anderer Marken

Alfa Network

Alfa Network APA-L01 Bedienungsanleitung

Naval

Naval PR-422CA Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung

TERK Technologies

TERK Technologies TV44 Bedienungsanleitung

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung

HP J8999A Bedienungsanleitung

MobilSat

MobilSat MSP-S Bedienungsanleitung

Steren

Steren ANT-UHF 13 Bedienungsanleitung

Novatel

Novatel 600-G Bedienungsanleitung

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Bedienungsanleitung

TRENDnet

TRENDnet TEW-AO12O Bedienungsanleitung

Radio Shack

Radio Shack 15-1837 Bedienungsanleitung

CommScope

CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics DAP25 Bedienungsanleitung

COBHAM

COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch

Trango Systems

Trango Systems AD900-9 Bedienungsanleitung

Steren

Steren ANT-100 Bedienungsanleitung

IWCS

IWCS iriBelt II Einrichtungshandbuch