Winix HR900 Bedienungsanleitung
User Manual
Model
Use & Care
Guide
• Please read and follow all safety rules and
instructions in this manual before operating.
• The product warranty is printed on the back of this
guide, so please keep it in a safe place for future use.
• This product is manufactured for use only in USA/CA.
WINIX AIR CLEANER
HR900
2
English HR900
CONTENTS
5-STAGE AIR PURIFICATION············································································ 3
CONTROLS······································································································ 4
WHERE TO USE ······························································································· 5
INSTALLING THE FILTERS················································································ 6
SAFETY AND CAUTIONS················································································· 8
INITIAL OPERATION························································································ 9
AUTO AND SLEEP ························································································· 10
MANUAL MODE, TIMER AND PLASMAWAVE
®
·············································· 11
CHILD LOCK, AIR QUALITY LED ···································································· 12
FILTER CARE·································································································· 13
CLEANING THE DUST SENSOR······································································ 17
CLEANING CARE ··························································································· 18
FREQUENTLY ASKED QUESTIONS································································· 19
UNIT SPECIFICATIONS ·················································································· 21
SAFETY INSTRUCTIONS················································································ 22
PRODUCT WARRANTY·················································································· 23
•This product is suitable for 120 V only.
French ·········································································································· 24
Spanish········································································································· 49
3
English HR900
5-STAGE AIR PURIFICATION
PlasmaWave
Advanced OdorControl
(AOCTM) Carbon Filter
replaceable
washable
replaceable
5
replaceable
Product User ManualPre-filter / AOCTM Carbon filter
/ True HEPA filter
12 Pet Filter
UserManual
Model
Use&Care
Guide
•
•
•
Pleaseread and follow all safety rules and instructions
inthis manual before operating.
The product warranty is printed on the back of this
guide,so please keep it in a safe place for future use.
This product is manufactured for use only in USA/CA.
WINIXAIR CLEANER
HR900
4
English HR900
CONTROLS
Air Outlet Vent
Light Sensor
Detects the amount
of ambient light within
the environment,
to adjust the brightness
of the LED indicators.
Mode / Fan Speed Button
Every time the Mode button
is pressed, the Mode LED light
will cycle through the settings.
(Auto, Sleep, Low, Medium,
High, Turbo)
Child Lock Button
Press and hold for 3 seconds
to enable or disable
the Child Lock mode.
Timer Indicator
If timer has been set,
the LED light indicates
the set time of operation.
Timer / Air Quality Light Button
Press to cycle through and set
desired length of operation
(1hr, 4hr, 8hr, [NO TIMER]).
Press and hold for 3 seconds
to enable or disable the
Air Quality light.
Smart Sensor
Automatically
detects indoor
air quality.
Reset Button
After replacing a lter,
press the RESET button
for at least 5 seconds.
Power Button
Turns the unit on
or o.
Child Lock Indicator
LED light indicates whether
Child Lock mode is
enabled or disabled.
Check Filter Indicator
LED light indicates when it is
time to change the lter.
PlasmaWave
Indicator
Indicates whether
PlasmaWave
®
is
enabled or disabled.
PlasmaWave Button
Enables or disables
PlasmaWave
®
.
5
English HR900
WHERE TO USE
Allow 12 ~ 18 in. of space between TVs, radios, and other electronic products
electromagnetic interference from certain electronics may cause product malfunction.
Place indoors away from direct sun light
direct exposure may cause product malfunction or failure.
Only place on hard, flat surfaces
flimsy or slanted surfaces may result in abnormal noise and vibrations.
12~18 in
4 in
WARNING Follow these instructions to reduce the risk of serious injury
or death and to reduce risk of damaging the unit.
Do not use around mist or fumes from
industrial oil or around large quantities of
metallic dust
Do not place around heating elements
Do not install in any sort of motor or
transport vehicle (trucks, boats, ships, etc.)
Do not place in an area with excessive
amounts of noxious gases
Do not place near any flammable
materials (aerosols, fuel, gases etc.) Do not have unit facing into wind or draft
Do not place below any electrical outlet Do not place in excessively humid areas
where unit may become wet
•This unit is not intended to be used to preserve documents or in art conservation.
6
English HR900
This product comes with all of the required filters. The protective plastic wrap must be
removed from the filters before use.
•Operating the unit without removing the plastic wrap may result in product failure.
•Unplug and make sure the unit is turned off before installing filters.
•The unit will automatically power off when front panel is opened.
1Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
•To remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
Latch
2 Remove the filters from the unit, they are
protected inside a plastic wrap.
3 Remove filters from protective plastic wrap.
•Operating the unit without removing
filters from plastic may cause abnormal
noise, deformation, or fire as a result of
overheating.
NOTE •Refer to pages 13 - 16 for detailed information on filter care
and how to replace them.
INSTALLING THE FILTERS
7
English HR900
INSTALLING THE FILTERS
1 Install the filters until they fit securely in
place.
Filters must be installed in this order:
True HEPA filter (rear)
AOC
TM
Carbon Filter (middle)
Pre-filter (front)
•To install the pre-filter, insert bottom tabs
into the slots on either side of the lower part
of the unit, then rotate upward to insert the
upper tabs into the slots at the top part of
the unit until both sides audibly click into
place.
Pre-filter
AOC
TM
Carbon
Filter
True HEPA
filter
2 Replace the front panel by first inserting
the latch at the bottom edge into the
base of the unit, then rotate the panel
upward toward the top of the unit until it
magnetically snaps closed.
•When to service and replace filters :
Filter Indicator Light When to service When to replace
2 Pre-filter none Clean once every
14days Permanent
3 AOC™ Carbon Filter Clean once every
3 months Lasts up to
12months
4 True HEPA filter Can NOT be
WASHED
•Intervals between filter replacement may vary depending on environment.
•For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
To purchase replacement
Winix filters:
(877)-699-4649
www.winixamerica.com
FILTER
Item: 1712-0094-00
U
This unit
is compatible
with
filter
FILTER
Item: 1712-0093-00
T
This unit
is compatible
with
filter &
8
English HR900
SAFETY AND CAUTIONS
Before operating this equipment, carefully read and follow these safety cautions and
instructions to avoid damage and ensure safe use.
Ensure filters are inserted before running unit
running unit without filters can shorten the units life and cause electric shock or injury.
Be sure foreign objects are NOT inserted into the vents on the unit
objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit with wet hands
the high voltage may cause electric shock.
Ensure unit intake and outlet vents do not become blocked
blockage may lead to increased internal temperatures causing product failure and
deformation.
Do not use the unit as a step stool or place heavy objects on it
personal injury may occur or product failure and deformation.
WARNING Follow these instructions to reduce the risk of serious
injury or death and to reduce risk of damaging the unit.
Do not pull on the power cord when
unplugging the unit
Do not tie or knot power cord when unit
is in operation
If the unit becomes submerged in water,
unplug it and contact customer service
Do not unplug or move the unit while in
operation
Do not plug additional appliances into
the same outlet or power supply Do not touch the plug with wet hands
Unplug unit when not in operation for
extended periods of time
Cord can become damaged by forcefully
bending, pulling, twisting, bundling,
pinching or placing heavy objects on it
9
English HR900
INITIAL OPERATION
1 Insert the unit plug into an electrical outlet.
•The Control Panel lights will turn on and
off.
2 Press the 'Power' button.
NOTE •During the first 4 minutes of power up, the Air Quality light
will flash as the Smart Sensors measure the air quality in the
environment, after which normal operation will begin.
•By default, when the unit first powers on, the
mode will be set to Auto with PlasmaWave
®
enabled.
•When in Auto Mode the fan speed will
be automatically adjusted according to
the environments air quality.
•PlasmaWave
®
works to remove harmful
airborne contaminants.
NOTE •In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
•When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave
®
, it is normal and does not signify product
failure. To disable PlasmaWave
®
, see page 11.
10
English HR900
AUTO AND SLEEP
Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
1. Auto Mode
Enables Auto operation based on the unit's air quality Smart Sensors.
Press the Mode button to select Auto mode.
•The mode LED light will indicate when
‘Auto’mode has been selected, and
operation will begin.
•Each time the Mode button is pressed,
the modes will be cycled. (Auto, Sleep,
Low, Medium, High, Turbo).
NOTE •When in Auto Mode the fan speed is automatically adjusted
according to the indoor air quality. As the indoor air quality
improves, the fan speed will automatically be reduced. If the
indoor air quality decreases the fan speed will automatically
be increased.
•When the unit is first started, Auto Mode is enabled and set
to Low fan speed.
2. Sleep Mode
Press the Mode button to select Sleep mode.
•The mode LED light will indicate when
‘Sleep’mode has been selected, and
operation in that mode will begin.
NOTE •When Sleep mode is selected, the fan speed is automatically
set to Low. Fan speed can be changed by pressing the Fan
Speed (Mode) Button.
•When Sleep Mode is enabled, the Air Quality light is disabled.
Andere Handbücher für HR900
1
Inhaltsverzeichnis
Sprachen:
Andere Winix Luftreiniger Handbücher
Winix
Winix AAPU450-JDE Bedienungsanleitung
Winix
Winix HR950 Bedienungsanleitung
Winix
Winix 9800 Bedienungsanleitung
Winix
Winix QS Bedienungsanleitung
Winix
Winix AUS-9500 Bedienungsanleitung
Winix
Winix XQ Pro Bedienungsanleitung
Winix
Winix FreshHome PlasmaWave WACP150 Bedienungsanleitung
Winix
Winix Zero AUS-1050AZBU Bedienungsanleitung
Winix
Winix U300 Bedienungsanleitung
Winix
Winix AAPU500-JLE Bedienungsanleitung
Winix
Winix FreshHome PlasmaWave WACP150 Bedienungsanleitung
Winix
Winix C535 Bedienungsanleitung
Winix
Winix Zero S Bedienungsanleitung
Winix
Winix ZERO Bedienungsanleitung
Winix
Winix XLC Bedienungsanleitung
Winix
Winix HR1000 Bedienungsanleitung
Winix
Winix 9500 Bedienungsanleitung
Winix
Winix ZERO-N Bedienungsanleitung
Winix
Winix A231 Bedienungsanleitung
Winix
Winix AAPU500-JLE Bedienungsanleitung
Beliebte Luftreiniger Handbücher anderer Marken
AtmosAir
AtmosAir P2002 Bedienungsanleitung
Friedrich
Friedrich C-90A Bedienungs- und Montageanleitung
Surgically Clean Air
Surgically Clean Air JADE2.0 Bedienungsanleitung
Base aire
Base aire 555 Pro Bedienungsanleitung
Champion
Champion CP25 Bedienungsanleitung
vollara
vollara Air & Surface Pro+ Bedienungsanleitung