Winix ZERO 5 Bedienungsanleitung
WINIX ZERO 5 AIR PURIFIER
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
USER MANUAL
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 2
CONTENTS.............................................................................................................2
5-STAGE AIR PURIFICATION ................................................................................3
CONTROLS.............................................................................................................4
WHERE TO USE.....................................................................................................5
INSTALLING FILTERS ............................................................................................6
SAFETY AND CAUTIONS.......................................................................................8
INITIAL OPERATION...............................................................................................9
AUTO & SLEEP.....................................................................................................10
MANUAL MODE, TIMER AND PLASMAWAVE®...........................................................................................11
CHILD LOCK, AIR QUALITY LED LIGHT .............................................................12
FILTER CARE .......................................................................................................13
CLEANING THE DUST SENSOR .........................................................................16
CLEANING CARE .................................................................................................17
FREQUENTLY ASKED QUESTIONS ...................................................................18
UNIT SPECIFICATIONS .......................................................................................19
CONTENTS
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 3
5-STAGE AIR PURIFICATION
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 4
CONTROLS
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 5
Allow 30 ~ 45 cm of space between TVs, radios, and other electronic products electromagnetic interference from
certain electronics may cause product malfunction.
Place indoors away from direct sun light direct exposure may cause product malfunction or failure.
Only place on hard, at surfaces imsy or slanted surfaces may result in abnormal noise and vibrations.
30~45 cm 10 cm
Follow these instructions to reduce the risk of serious injury or death and
to reduce risk of damaging the unit.
Do not use around mist or fumes from
industrial oil or around large quantities of
metallic dust.
Do not place around heating elements.
Do not install in any sort of motor or
transport vehicle (trucks, boats, ships,
etc.).
Do not place in an area with excessive
amounts of noxious gases.
Do not place near any ammable materials
(aerosols, fuel, gases etc.).
Do not have unit facing into wind or draft.
Do not place below any electrical outlet. Do not place in excessively humid areas
where unit may become wet.
WHERE TO USE
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 6
This product comes with all of the required lters. The protective plastic wrap must be removed from the lters before
use.
• Operating the unit without removing the plastic wrap may result in product failure.
• Unplug and make sure the unit is turned o before installing lters.
• The unit will automatically power o when front panel is opened.
1. Remove the front panel by grasping its upper
edge and gently pulling forward.
• To remove the front panel, the latch at the lower
edge of the panel must be released from its po-
sition.
2. Remove the lters from the unit, they are protect-
ed inside a plastic wrap.
3. Remove lters from protective plastic wrap.
• Operating the unit without removing lters from
plastic may cause abnormal noise, deformation,
or re as a result of overheating.
NOTE : Refer to pages 13 - 16 for detailed information on lter care and how to replace them.
INSTALLING FILTERS
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 7
4. Install the lters until they t securely in place.
Filters must be installed in this order:
3 True HEPA Filter (rear)
2 Deodorization lter (middle)
1 Pre-lter (front)
• To install the Pre-lter, insert bottom tabs into the
slots on either side of the lower part of the unit,
then rotate upward to insert the upper tabs into
the slots at the top part of the unit until sides audi-
bly click into place.
5. Replace the front panel by rst inserting the latch
at the bottom edge into the base of the unit, then
rotate the panel upward toward the top of the unit
until the magnets pull the lid closed.
6. When to service and replace lter:
Filter Indicator Light When to service When to replace
1 Pre-lter none Clean once every 14 days Permanent
2 Deodorization lter
Can NOT be WASHED Lasts up to 12 months
3 True HEPA lter
• Intervals between lter replacement may vary depending on environment.
• For optimal use, Pre-lter can be cleaned every 14 days which can extend the life of other lters.
• Pet lter replacement guide separately mentioned on the Pet lter package board.
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 8
Before operating this equipment, carefully read and follow these safety cautions
Ensure lters are inserted before running unit
running unit without lters can shorten the units life and cause electric shock or injury.
Be sure foreign objects are NOT inserted into the vents on the unit
objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit with wet hands
the high voltage may cause electric shock.
Ensure unit intake and outlet vents do not become blocked
blockage may lead to increased internal termperatures causing product failure and derformation.
Do not use the unit as a step stool or place heavy objects on it
personal injury may occur or product failure and deformation.
Follow these instructions to reduce the risk of serious injury or death and
to reduce risk of damaging the unit.
Do not pull on the power cord when
unplugging the unit
Do not tie or knot power cord when unit is
in operation
If the unit becomes submerged in water,
unplug it and contact customer service
Do not unplug or move the unit while in
operation
Do not plug additional appliances into the
same outlet or power supply
Do not touch the plug with wet hands
Unplug unit when not in operation for
extended periods of time
Cord can become damaged by forcefully
bending, pulling, twisting, bundling,
pinching or placing heavy objects on it
• If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufac-
turer or its service agent.
• This appliance is not intended for use by a person (including children) with reduced physical sensory or men-
tal capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
SAFETY AND CAUTIONS
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 9
1. Insert the power cord into an electrical outlet.
• The Control Panel lights will turn on and o.
2. Press the ‘Power’ button.
NOTE : During the rst 4 minutes of power up, the Air Quality light will ash as the Smart Sensors measure the
air quality in the environment, after which normal operation will begin.
3. By default, when the unit rst powers on, the mode
will be set to Auto with PlasmaWave®enabled.
• When in Auto mode, the fan speed will be auto-
matically adjusted according to the environments
air quality.
• PlasmaWave® works to remove harmful airborne
contaminants.
NOTE :
• In Auto mode, as the indoor air quality improves, the fan speed will automatically be reduced to Low.
• When the unit is running, you may hear a chirping or buzzing sound. The sound is from large particles pass-
ing through PlasmaWave®, it is normal and does not signify product failure. To disable PlasmaWave®, see
page 11.
INITIAL OPERATION
USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 10
Every time the Mode button is pressed, the Mode LED light will cycle through the settings. (Auto, Sleep, Low,
Medium, High, Turbo)
Auto Mode
Enables Auto operation based on the unit’s air quality Smart Sensors.
1. Press the Mode button to select Auto mode.
• The mode LED light will indicate when ‘Auto’ mode
has been selected, and operation will begin.
• Each time the Mode button is pressed, the modes
will be cycled. (Auto, Sleep, Low, Medium, High,
Turbo).
NOTE :
• When in Auto Mode the fan speed is automatically adjusted according to the indoor air quality. As the indoor
air quality improves, the fan speed will automatically be reduced. If the indoor air quality decreases the fan
speed will automatically be increased.
• When unit is rst started, Auto Mode is enabled and set to Low fan speed.
Sleep Mode
1. Press the Mode button to select Sleep mode.
• The mode LED light will indicate when ‘Sleep’
mode has been selected, and operation in that
mode will begin.
NOTE :
• When Sleep mode is selected, the fan speed is automatically set to Low. Fan speed can be changed by
pressing the Fan Speed (Mode) Button.
• When Sleep Mode is enabled, the Air Quality light is disabled.
AUTO & SLEEP
Inhaltsverzeichnis
Andere Winix Luftreiniger Handbücher
Winix
Winix ZERO Pro Bedienungsanleitung
Winix
Winix Air Cleaner Bedienungsanleitung
Winix
Winix 5300-2 Bedienungsanleitung
Winix
Winix FreshHome PlasmaWave WACP150 Bedienungsanleitung
Winix
Winix 9500 Bedienungsanleitung
Winix
Winix 5300-2 Bedienungsanleitung
Winix
Winix ZERO Bedienungsanleitung
Winix
Winix HEPA 5500 Bedienungsanleitung
Winix
Winix NK305 Bedienungsanleitung
Winix
Winix ZERO+ WiFi Bedienungsanleitung
Winix
Winix A231 Bedienungsanleitung
Winix
Winix NK105 Bedienungsanleitung
Winix
Winix Zero AUS-1050AZBU Bedienungsanleitung
Winix
Winix ZERO Bedienungsanleitung
Winix
Winix PlasmaWave WACU300 Bedienungsanleitung
Winix
Winix ZERO Pro Bedienungsanleitung
Winix
Winix AUS-9500 Bedienungsanleitung
Winix
Winix 2020EU Bedienungsanleitung
Winix
Winix ZERO-N Bedienungsanleitung
Winix
Winix C535 Bedienungsanleitung
Beliebte Luftreiniger Handbücher anderer Marken
AtmosAir
AtmosAir P2002 Bedienungsanleitung
Friedrich
Friedrich C-90A Bedienungs- und Montageanleitung
Surgically Clean Air
Surgically Clean Air JADE2.0 Bedienungsanleitung
Base aire
Base aire 555 Pro Bedienungsanleitung
Champion
Champion CP25 Bedienungsanleitung
vollara
vollara Air & Surface Pro+ Bedienungsanleitung