Winmate M133 Series Bedienungsanleitung
Please read these instructions carefully before using this product, and save this manual for future use.
Rugged Tablet PC
M133 Series
Windows 10 IoT Enterprise
Windows Embedded 8.1 Industry Pro
Windows 7 Professional for Embedded System
OS Deployment Guide
Version 1.1
Release date: 17-Apr-2017
- 1 -
Document Revision History
Version
Date
Note
1.0
09-Mar-2017
Initial document release
1.1
17-Apr-2017
Add Graphics Settings
- 2 -
CONTENTS
CHAPTER 1: INTRODUCTION 3
CHAPTER 2: BIOS 4
2.1 BIOS and OS Support Overview 4
2.2 Changing BIOS Mode for OS Installation 4
2.3 BIOS Navigation Keys 5
2.4 Changing BIOS Settings to Install OS 7
2.5 BIOS and EC Firmware Update Guide 11
CHAPTER 3: SETTING UP OS FIRST TIME 24
3.1 Windows 10 IoT Enterprise 24
3.2 Windows Embedded 8.1 Industry Pro 30
3.3 Windows 7 Ultimate / Professional for Embedded System 35
CHAPTER 4: DRIVER INSTALLATION 40
4.1 Windows 10 IoT Enterprise 40
4.2 Windows Embedded 8.1 Industry Pro 41
4.3 Windows 7 Professional for Embedded System 42
4.4 WMMIO Driver Installation (For Windows 7/8/10) 52
CHAPTER 5: UTILITY INSTALLATION 54
5.1 List of Winmate AP and Utilities 54
5.2 Installation Procedure 55
CHAPTER 6: SERIAL COM PORT SETTINGS 56
6.1 COM Port Settings 56
6.2 Adjusting COM Port Number 57
6.3 Setting Up Bluetooth COM Port 59
6.4 How to Check COM Port Proprieties 61
CHAPTER 7: OS SETTING ADJUSTMENTS 63
7.1 Microphone Setting Adjustment 63
7.2 Display Size Adjustment 66
7.3 On-screen Keyboard Adjustment (For Windows 10 Only) 69
7.4 Graphics Setting 74
CHAPTER 8: WINMATE SDK SUPPORT 78
8.1 Winmate Download Center 78
8.2 Download SDK from Winmate File Share 78
- 3 -
CHAPTER 1: INTRODUCTION
This document contains references and instructions on operation system and utility
installation. This guide describes the procedure how to update BIOS or change
BIOS settings to install the OS different from Winmate shipment.
For standard installation Windows OS installation, you can use Winmate’s
Recovery CD/ DVD or use Recovery Wizard following procedures described in
the M133 Series User Manual.
For alternative way, if customer installs Windows from Microsoft CD/ DVD; this
document explains some key important information (especially for consumer
versions of Windows, Non-Embedded OS).
- 4 -
CHAPTER 2: BIOS
2.1 BIOS and OS Support Overview
Newer operating systems such as Windows 8 and Windows 10 are supported when
the BIOS is in UEFI mode, while Windows 7 is only supported when the BIOS is in
Legacy Mode. Please make sure the BIOS is in the corresponding mode before
proceeding to OS installation:
BIOS Mode
Supported Operating System
UEFI
Windows 8, Windows 10
Legacy
Windows 7
2.2 Changing BIOS Mode for OS Installation
There are two ways to change the BIOS mode on the tablet for new OS installation
1. Through change of BIOS settings (UEFI / LEGACY mode) using the BIOS
menu
2. Update the BIOS to the corresponding preset versions dedicated to different
Windows versions.
IMPORTANT:
Choose only one BIOS Setup method for OS Installation: either
change BIOS settings (UEFI/LEGACY mode) or update the BIOS to
the corresponding preset versions dedicated to different Windows
versions.
The choice depends on your preferences.
- 5 -
2.3 BIOS Navigation Keys
This section describes the procedure to enter BIOS settings and introduces BIOS
navigation keys. To enter the BIOS setup, you need to connect an external USB
keyboard, press Del key when the prompt appears on the screen during start up.
The prompt screen shows only few seconds so need press Del key quickly.
BIOS Navigation Keys
The following keys are enabled during POST:
Key
Function
Del
Enters the BIOS setup menu.
F7
Display the boot menu. Lists all bootable devices that are connected
to the system. With cursor ↑and cursor ↓and by pressing <ENTER>,
select the device used for the boot.
Pause
Pressing the [Pause] key stops the POST. Press any other key to
resume the POST.
- 6 -
The following Keys can be used after entering the BIOS Setup.
Key
Function
F1
General Help
F2
Previous Values
F3
Optimized Defaults
F4
Save & Exit
Esc
Exit
+/-
Change options
Enter
Select or execute command
Cursor ↑
Moves to the previous item
Cursor ↓
Goes to the next item
Cursor ←
Moves to the previous item
Cursor →
Goes to the next item
- 7 -
2.4 Changing BIOS Settings to Install OS
This section describes how to change operating system mode in BIOS settings to
install OS that is different from the version that is shipped.
2.4.1 Default Windows 8/8.1 change to Windows 7
The instruction below describes how to change Windows 8/8.1 to Windows 7.
1. Enter BIOS Setup utility.
2. Go to “Boot” at BIOS setup menu. Click on Select Operating System.
- 8 -
3. Change OS setting to Windows 7.
- 9 -
2.4.2 Default Windows 7 change to Windows 8.1
1. Enter BIOS Setup menu.
2. Go into item “Boot” at BIOS setup menu.
3. Change OS setting to Windows 8.X.
Inhaltsverzeichnis
Andere Winmate Tablette Handbücher
Winmate
Winmate M133WK Series Bedienungsanleitung
Winmate
Winmate M101RK Series Bedienungsanleitung
Winmate
Winmate M101B Series Bedienungsanleitung
Winmate
Winmate M9020 Bedienungsanleitung
Winmate
Winmate M101B Series Bedienungsanleitung
Winmate
Winmate R12ID8M-RTM7GP Bedienungsanleitung
Winmate
Winmate I98H5 Bedienungsanleitung
Winmate
Winmate M101B Series Bedienungsanleitung
Winmate
Winmate M101M8 Series Bedienungsanleitung
Winmate
Winmate S101TG Bedienungsanleitung
Winmate
Winmate M133WK Series Bedienungsanleitung
Winmate
Winmate M101B Series Bedienungsanleitung
Winmate
Winmate M101BT Series Bedienungsanleitung
Winmate
Winmate M101M8 Series Bedienungsanleitung
Winmate
Winmate M101BU Series Bedienungsanleitung
Winmate
Winmate NXBoard Bedienungsanleitung
Winmate
Winmate M900P Bedienungsanleitung
Winmate
Winmate W07IB3S-PCM1AC Bedienungsanleitung
Winmate
Winmate W10IB3S-PCH2AC-PoE S-Series Bedienungsanleitung
Winmate
Winmate W07I98M-RTC1 Bedienungsanleitung
