Winmate W22IB3S-PCA3 PPC Bedienungsanleitung

Please read these instructions carefully before using this product, and save this manual for future use.

W22IB3S-PCA3 PPC

Quick Start Guide

Version 1.0

January 2015

W22IB3S Quick Start Guide 1

Introduction

Winmate’s W22IB3S-PCA3 is 21.5” flat Panel PC with Capacitive Touch Key for quick access to

hardware and display OSD control. The PPC features P-Cap multi-touch screen that supports

simultaneous 10-points Multi-touch for a better user experience.

Features

‧21.5” 1920 x 1080 Resolution with P-Cap Multi-touch Screen

•Low-power System with Intel®Celeron® N2930 Processor

•Fanless Cooling System and Ultra-low Power Consumption

•10-points Multi-touch with Windows 8

•Capacitive Touch Key for Hot key and Display Control

•Front IP66 Water and Dust Proof

2 W22IB3S Quick Start Guide

Appearance

Front View

Side View

W22IB3S Quick Start Guide 3

Rear View

Bottom View

Top View

Description

USB 2.0 x 2 (Optional)

HDMI x 1

RS232 x 1 (Optional)

RJ-45 GbE LAN x 2

12V DC IN, 3-Pin Terminal Block x 1

4-Channel Isolated DIDO x 1 (Optional)

RS232/422/485 x 1

Audio Jack x 1 (Optional)

USB 3.0 x 1, USB 2.0 x 1

2W Speaker x 2

4 W22IB3S Quick Start Guide

Getting Started

Capacitor Touch Keys Introduction

The W22IB3S-PCA3 comes with five capacitive touch keys on the front panel for quick

access to hardware and display OSD control.

Touch Keys

Function

Description

Power

Power on/off control

Brightness/Volume

To increase brightness of panel

/To increase Volume

(by HotTab Setting)

Brightness/Volume

To decrease brightness of panel

/To decrease Volume

(by HotTab Setting)

Switch to Metro or Desktop

(by HotTab Setting)

Function

User programmable function key

(by HotTab Setting)

W22IB3S Quick Start Guide 5

Turning On / Off

Turning On

Press and hold the capacitive power key for 4 seconds until the blue LED backlight lid up.

Turning Off

Perform the following procedure to shutdown the Panel PC (for Windows 8):

1. Make sure you have closed any programs that are open on the Desktop. Start Screen

apps don’t need to be closed.

2. Open the Charms Bar by swiping your finger from the far right of the screen towards the

middle of the screen.

3. Tab on the Settings charm.

4. Tab on Power.

5. Tab on Shut Down.

6. Wait for Panel PC to power off.

Perform the following procedure to shutdown the Panel PC (for Windows 7):

1. Make sure you have closed any programs that are open on the Desktop.

2. Click the Start button , and then, in the lower-right corner of the Start menu, click Shut

down.

3. Or click the arrow next to the Shut down button for more options.

Note:

The computer will forcibly be turned off if the capacitive power key is pressed and held for 8

seconds or longer.

If the capacitive power key is pressed and held between 5 to 8 seconds, the computer will

enter preset custom power button action in OS. (ex: Do nothing, Ask me what to do,

Standby or Shut down)

6 W22IB3S Quick Start Guide

Using the Panel PC

HotTab Introduction

The HotTab mapping menu option allows user to change the function of the five physical touch

keys (brightness/volume keys, menu key, and function key).

Note:

For the Panel PC to work with the capacitive touch keys, the HotTab Utility has to be

installed and running the background. The power touch key is designed to work

independently, and would work without HotTab Utility.

Installing Touch Key HotTab Control Utility

In the driver CD, find the installation file “CapacitiveTouchKeys.rar” and execute to start the

installation. Follow the on-screen prompt with the installation wizard to finish the installation.

Note:

If the Panel PC is ordered with OS pre-installed, the HotTab Control Utility would have been

installed already.

HotTab Utility Icon shown in Windows System Tray:

Using the Capacitive Touch Key

As Windows starts up, HotTab starts and runs in the background. To display the HotTab control

utility, double click on the HotTab Utility icon in Windows System Tray.

There are 5 main menu options: +/- Key, Function Key, Menu Key, Touch Lock and Key Unlock.

Operations and functions on each menu option are explained in detail in the coming section.

W22IB3S Quick Start Guide 7

Setting the +/- Key (HotTab)

This HotTab +/- Key option allows users set the (+) and (-) touch keys’ functions. The +/- keys

can be set to control volume, brightness of the screen, and adjustment scale.

Volume Mode

Under this mode, the +/- Key controls Volume. (+) touch key is mapped to raise volume and (-)

touch key is mapped to lower volume.

To configure the key mapping, perform the following:

1. Open the HotTab utility by double clicking on the HotTab Utility icon in Windows System

Tray.

2. Tap on the +/- Key option.

3. Tap on Volume option.

Brightness Mode

Under this mode, the +/- Keys controls the screen Brightness. (+) touch key is mapped to raise

screen brightness and (-) touch key is mapped to lower screen brightness.

To configure the key mapping, perform the following:

1. Open the HotTab utility by double clicking on the HotTab Utility icon in Windows System

Tray.

2. Tap on the +/- Key option.

8 W22IB3S Quick Start Guide

3. Tap Brightness option.

Adjustment Scale Mode

Under this mode, the +/- Keys switches between user’s preset Brightness level. (+) touch key

sets the screen brightness to user’s preset maximum level and (-) touch key sets the screen

brightness to user’s preset minimum level. In other words, user can switch between two different

brightness levels quickly.

To configure the key mapping, perform the following:

1. Open the HotTab utility by double clicking on the HotTab Utility icon in Windows System

Tray.

2. Tap on the +/- Key option.

3. Tap Adjustment Scale option.

4. Drag the Maximum (+) slider or Minimum (-) slider to the right or left to set the desired

brightness level.

W22IB3S Quick Start Guide 9

Setting the Function Key (HotTab)

This HotTab Function Key option allows users set the function touch key’s function.

To configure function key mapping, perform the following:

1. Open the HotTab utility by double clicking on the HotTab Utility icon in Windows System

Tray.

2. Tap on the Function Key option.

3. Pick from list of preset applications by tapping on the application icons OR customize

which application to execute using the picker.

Using the Custom picker:

1. Tap the icon to reveal browser window

2. Navigate to the desired executable to map to function key

3. Tap on “Done”to save selection.

Inhaltsverzeichnis

Andere Winmate Touchscreen Handbücher

Winmate

Winmate R17IB3S-RKA1ML Bedienungsanleitung

Winmate

Winmate W10IB3S-MRH2 Bedienungsanleitung

Winmate

Winmate R15IB3S-PCC3-PoE Bedienungsanleitung

Winmate

Winmate R15IH3S-MRA3FP Bedienungsanleitung

Winmate

Winmate W10IB3S-GSH1HB Bedienungsanleitung

Winmate

Winmate G-WIN W07RK3S-GCT1 Bedienungsanleitung

Winmate

Winmate R15IK3S-65C3 Bedienungsanleitung

Winmate

Winmate W07IB3S-GCM1(HB) Bedienungsanleitung

Winmate

Winmate R15IW3S-SPC3 Bedienungsanleitung

Winmate

Winmate R17IH3S-MLA1-89 Bedienungsanleitung

Winmate

Winmate W07FA3S-GCM1 Bedienungsanleitung

Winmate

Winmate R15IH3S-SPC3 Bedienungsanleitung

Winmate

Winmate W10FA3S-GCH1 Bedienungsanleitung

Winmate

Winmate 7'' S-Series Bedienungsanleitung

Winmate

Winmate G-Win Series Bedienungsanleitung

Winmate

Winmate R10IBWS-MHP1 Bedienungsanleitung

Winmate

Winmate R15IW3S-65C3 Bedienungsanleitung

Winmate

Winmate ARM-11 HMI Series Bedienungsanleitung

Winmate

Winmate Military Series Bedienungsanleitung

Winmate

Winmate R05FA3S-IPD1HMHB Bedienungsanleitung

Winmate

Winmate E-Series Bedienungsanleitung

Winmate

Winmate R10IB3S-67T2 Bedienungsanleitung

Winmate

Winmate W27FA3S-CHC1 Bedienungsanleitung

Winmate

Winmate G-WIN GC Series Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung