Wireless ACW/LW8-DIND160 Bedienungsanleitung

ATIM Cloud Wireless®

Metering and Dry Contacts

DINDxxx

User Guide

Concerned models:

ACW/LW8-DIND160

ACW/SF8-DIND160

ACW/LW8-DIND80

ACW/SF8-DIND80

ACW/LW8-DIND88

ACW/SF8-DIND88

ACW/LW8-DIND44

ACW/SF8-DIND44

1 
ACW-DINDxxx_UG_EN_V1.8 
Table of content 
DOCUMENT VERSION HISTORY.......................................................................................................................................3 
DISCLAIMER .....................................................................................................................................................................3 
TRADEMARKS AND COPYRIGHT......................................................................................................................................3 
DECLARATION OF COMPLIANCE .....................................................................................................................................4 
ENVIRONMENTAL RECOMMENDATIONS .......................................................................................................................4 
A.EXPLOSIVE ATMOSPHERE..........................................................................................................................................4 
B.ENVIRONMENT .......................................................................................................................................................4 
C.RADIO ...................................................................................................................................................................5 
PRELUDE...........................................................................................................................................................................6 
PRODUCT IDENTIFICATION .............................................................................................................................................7 
1. TECHNICAL FEATURES............................................................................................................................................8 
A.PRODUCTS FEATURES...............................................................................................................................................8 
B.ELECTRICAL FEATURES..............................................................................................................................................9 
C.INPUTS AND COUNTERS FEATURES ...........................................................................................................................10 
D.TEMPERATURE SENSOR FEATURES............................................................................................................................10 
E.METERS BACK-UP..................................................................................................................................................10 
F.OUTPUTS CALENDAR..............................................................................................................................................10 
2. FOOTPRINT AND MOUNTING ..............................................................................................................................12 
3. SET UP ...................................................................................................................................................................13 
A.ANTENNA POSITIONING..........................................................................................................................................13 
B.MODEM CONNECTION...........................................................................................................................................13 
Antenna (SMA connector)....................................................................................................................................13 
Jack connector ......................................................................................................................................................13 
Micro USB .............................................................................................................................................................13 
C.TERMINALS’DESCRIPTION.......................................................................................................................................14 
D.PUSHBUTTON .......................................................................................................................................................15 
E.LEDS MEANING ....................................................................................................................................................15 
4. NORMAL BEHAVIOR AT STARTUP........................................................................................................................16 
5. SETUP AND CONFIGURATION..............................................................................................................................17 
A.SETUP .................................................................................................................................................................17 
Inputs setup ..........................................................................................................................................................17 
Available event....................................................................................................................................................................17 
Pulling types (from version V1.2.0)....................................................................................................................................17 
Available trigger modes......................................................................................................................................................17 
Bounce time parameter........................................................................................................................................18 
Periodic frame parameter ....................................................................................................................................18 
Keep alive frame parameters...............................................................................................................................18 
The available periods are as follows ..................................................................................................................................18 
Temperature parameter (offset)..........................................................................................................................18 
Pairing method setup ...........................................................................................................................................18 
B.CONFIGURATION VIA USB......................................................................................................................................19 
6. UPLINKS ON IOT NETWORKS (SIGFOX/LORAWAN).............................................................................................22 
A.TEST FRAME .........................................................................................................................................................22 

2 
ACW-DINDxxx_UG_EN_V1.8 
Frame format........................................................................................................................................................22 
B.KEEP ALIVE FRAME.................................................................................................................................................22 
Frame format........................................................................................................................................................22 
C.STATE FRAME .......................................................................................................................................................22 
Digital inputs frame..............................................................................................................................................23 
Frame of digital IN/OUT and temperature..........................................................................................................23 
Digital IN/OUT frame, temperature and counter 1 ............................................................................................23 
Frame of digital IN/OUT, counter 1 and counter 2 .............................................................................................23 
Frame of digital IN/OUT and counter 1 ...............................................................................................................23 
Counters 1 & 2 frame ...........................................................................................................................................24 
Counters 3 & 4 ......................................................................................................................................................24 
Counters 5 & 6 ......................................................................................................................................................24 
Counters 7 & 8 ......................................................................................................................................................24 
Frame of digital IN/OUT, temperature and counters 1 to n (only LoRaWAN)...................................................24 
Frame of digital IN/OUT and counters 1 to n (only LoRaWAN)..........................................................................25 
D.ALARM OF SHOCK FRAME .......................................................................................................................................25 
E.FORMAT/DECODING OF DATA/FRAMES.....................................................................................................................25 
State of digital inputs (for DIND160 and DIND80)..............................................................................................25 
State of digital inputs/outputs (for DIND88 and DIND44)..................................................................................25 
Metering..............................................................................................................................................................................26 
Temperature in 1/10 of °C..................................................................................................................................................26 
Power supply tension (millivolt).........................................................................................................................................26 
Metering..............................................................................................................................................................................26 
F.FRAMES SUMMARY................................................................................................................................................27 
7. DOWNLINKS FROM IOT NETWORKS (SIGFOX OU LORAWAN)...........................................................................28 
A.PARAMETERS........................................................................................................................................................28 
Keep alive frame parameters (Code 03) ..............................................................................................................28 
Inputs parameters (Code 10 to 25)......................................................................................................................29 
Events - bits 0 to 4...............................................................................................................................................................29 
Pull types - bits 5 (from V1.2.0)..........................................................................................................................................30 
Trigger modes - bits 6 to 7..................................................................................................................................................30 
Rebound time parameter (Code 30) ....................................................................................................................30 
Parameter of the periodic frame (Code 31) ........................................................................................................30 
Settings on temperature - Offset (Code 32) ........................................................................................................30 
Output calendar configuration (code 34 to 40) ..................................................................................................31 
Shock alarm configuration (code 41)...................................................................................................................32 
B.COMMANDS.........................................................................................................................................................32 
Restart (Command 0x01) .....................................................................................................................................32 
About (Command 0x02) .......................................................................................................................................32 
Reconfiguration with default settings (Command 0x03)....................................................................................32 
Obtain the complete configuration (Command 0x04)........................................................................................33 
Obtain the version of the used protocol (Command 0x07) ................................................................................33 
Apply a value to the counters (from version V1.2.0) (Command 0x0A).............................................................33 
Outputs monitoring ..............................................................................................................................................34 
Apply a state to outputs (Command 0x10)........................................................................................................................34 
Obtain the state of outputs (Command 0x20) ..................................................................................................................35 
Apply a state to outputs’ group (Command 0x11)............................................................................................................36 
Generate a positive pulse to an outputs group (Command 0x12)...................................................................................36 
Generate a negative pulse to an outputs’ group (Command 0x13).................................................................................37 
Enable/Disable Output calendar (0x0B).............................................................................................................................37 
Get output calendar state (0x0C).......................................................................................................................................38 
C.SUMMARY OF COMMANDS .....................................................................................................................................39 
8. TECHNICAL SUPPORT ...........................................................................................................................................40 

ACW-DINDxxx_UG_EN_V1.8

This user guide deals with the following references:

Document version history

Version

Date

Description

Author

1.8

21/09/2020

Output calendar (downlink and command) +

configuration of shock alarm + update configuration

manual

1.7

24/02/2020

Add new uplink frames (output status)

1.6

21/02/2020

Clarify Downlink summary table

1.5

07/10/2019

Re-reading and corrections

FR, CR

1.3

11/09/2019

- Renaming

- Outputs versions addtions (DIND44 and DIND88).

- Electrical features updates.

05/04/2018

Inputs decoding precisions

1.2

15/03/2018

SF8/LW version in 8 and 16 inputs

Downlink commands addition

1.1

27/09/2017

Complete version in SF8

1.0

26/06/2017

Corrections

0.9

10/06/2017

1st version

Disclaimer

The information contained in this document is subject to change without warning and does not

represent a commitment on the part of ATIM radiocommunications. ATIM radiocommunications

provides this document ‘as-is’ with no warranty of any kind, express or implied, including but not limited

to implied warranties of merchantability or fitness for a particular purpose. ATIM radiocommunications

may make changes and/or improvements to this manual or to the product(s) or program(s) described

in this manual, at any time.

Trademarks and copyright

ATIM radiocommunications®, ACW ATIM Cloud Wireless® and ARM Advanced Radio Modem® are

registered trademarks of ATIM SARL in France. The other trademarks mentioned in this document are

the property of their respective owners.

Product reference

Product version

ACW/SF8-DIND160

B.0

ACW/SF8-DIND80

B.0

ACW/SF8-DIND88

B.0

ACW/SF8-DIND44

B.0

ACW/LW8-DIND160

B.0

ACW/LW8-DIND80

B.0

ACW/LW8-DIND88

B.0

ACW/LW8-DIND44

B.0

ACW-DINDxxx_UG_EN_V1.8

Declaration of compliance

All ACW Atim Cloud Wireless® products comply with the regulatory requirements of the R&TTE Directive

(1999/5/EC), article 3:

1 SAFETY (Article 3.1a of the 1999/5/EC Directive)

NF EN60950-1 Ed. 2006/A1:2010/A11:2009/A12:2011 (health)

EN62479: 2010 (power <20mW) or EN62311:2008 (power > 20mW)

2 Electromagnetic compatibility (Article 3.1b of the 1999/5/EC Directive)

EN 301489-3 v1.4.1, EN 301489-1 V1.9.2

3 Efficient use of the radio frequency spectrum (Art.3.2 of the 1999/5/EC Directive)

ETSI EN300 220-2 v2.4.1 and EN300 220-1 v2.4.1

Environmental recommendations

a. Explosive atmosphere

Except for the ACW-ATEX line specifically intended for this purpose, do not use ACW radio modems in

the presence of flammable gases or fumes. Using the equipment in such an environment constitutes a

safety hazard.

b. Environment

Respect the temperature ranges for storage and operation of all products. Failing to respect these

guidelines could disrupt device operation or damage the equipment. ACW products in IP65 water- and

dust-resistant housings may be placed outdoors, but must not, under any circumstances, be submerged.

Follow the instructions and warnings provided below to ensure your own safety and that of the

environment and to protect your device from any potential damage.

ACW-DINDxxx_UG_EN_V1.8

General hazard –Failure to follow the instructions presents a risk of equipment damage.

Electrical hazard –Failure to follow the instructions presents a risk of electrocution and physical

injury.

Direct-current symbol

WARNING: do not install this equipment near any source of heat or any source of humidity.

WARNING: for your safety, it is essential that this equipment be switched off and disconnected from

mains power before carrying out any technical operation on it.

WARNING: the safe operation of this product is ensured only when it is operated in accordance with

its intended use. Maintenance may only be performed by qualified personnel.

Waste disposal by users in private households within the European Union. This symbol

appears on a product or its packaging to indicate that the product may not be discarded

with another household waste. Rather, it is your responsibility to dispose of this product

by bringing it to a designated collection point for the recycling of electrical and

electronic devices. Collection and recycling waste separately at the time you dispose of

it helps to conserve natural resources and ensure a recycling process that respects

human health and the environment. For more information on the recycling centre

closest to your home, contact your closest local government office, your local waste

management service or the business from which you purchased the product.

c. Radio

Modems in the ACW line are radio-communication modems that use the ISM (industrial, scientific and

medical) bands, which may be used freely (at no cost and with no authorisation required) for industrial,

scientific and medical applications.

ACW-DINDxxx_UG_EN_V1.8

Prelude

This guide describes the features of the ACW-DINDxxx product. It describes the characteristics of the

product, explains its commissioning, its configuration and its operation.

The ACW-DINDxxx is intended to raise the digital input states (ToR) on an IoT network such as Sigfox or

LoRaWAN. These inputs are configurable and can be enabled / disabled as single inputs or as counter

inputs. Versions with dry contact outputs are also available, allowing the remote control of various

equipment.

A temperature sensor can be optionally connected. The product also has a shock sensor for issuing an

alert in case of tearing of the limp.

ACW-DINDxxx_UG_EN_V1.8

Product identification

The product identifier is visible on the outer label:

Each product in ATIM's ACW range has a QR Code label visible either on the side or on the front of the

product. This QR Code can be easily read with any 2D barcode reader app on your smartphone.

Reading the QR Code indicates the following information:

ATIM|ACW/LW8-DIND88|A.0|190925|1|1.0|1.3.0|70B3D59BA0009030

Interpretation

ATIM

ACW/LW8-

DIN88

A.0

190925

1.0

1.3.0

70B3D59BA0009030

Manufactu

rer name

Product

reference

Revision

version

Date of

manufacture

(AAMMJJ)

Manufacture

site

Hardware

version

Application

firmware

version

DevEUI LoRaWAN

DIN88

Product ID

Product revision number

(Technical state hardware

and firmware)

Product reference

Datamatrix

DevEUI LoRaWAN

Serial N° of the product

ACW-DINDxxx_UG_EN_V1.8

1. Technical features

a. Products features

Dimensions

53 x 67 x 95 mm

Antenna

External connector SMA

Temperature

-20°C à +55°C (operating mode)

-40°C à +70°C (storage)

Mounting

Rail-DIN

Power supply

1 x power supply 10-30 Vcc

Consumption

100 mA

Digital inputs TOR

(DIND160)

-16 configurable inputs

-Change of state alerting

-8 configurable meters on whatever input (4 meters

before version V1.2.0)

-Available configuration of 4 group of inputs

Digital inputs TOR

(DIND80 et DIND88)

-8 configurable inputs

-Change of state alerting

-8 configurable meters on whatever input

-Available activation of a group of inputs

Digital inputs TOR

(DIND44)

-4 configurable inputs

-Change of state alerting

-4 meters configurable on whatever input

-Available activation of a group of inputs

Digital outputs TOR

-DIND88: 8 outputs driven via downlink

-DIND44: 4 outputs driven via downlink

Set up

USB Port or Downlink

Alarm

Wrenching / Shock

Frequency

865 –870 MHz

Power

25 mW (14 dBm)

Rate

Sigfox: 100 bps

LoRaWan: 300 bit/s à 10 Kbit/s

LoRaWAN

Class C

ACW-DINDxxx_UG_EN_V1.8

b. Electrical features

Min.

Type

Max.

Power supply (V)

10V

30V

Emission consumption (mA)

Condition:

-12V Power supply

-Every output is shut down

60mA –Sigfox

60mA –LoRaWAN

Condition:

- 24V Power supply

-Every output is shut down

35 mA –Sigfox

30mA –LoRaWAN

Reception consumption (mA)

Condition:

-12V Power supply

-Every output is shut down

50mA –Sigfox

30mA –LoRaWAN

Condition:

- 24V Power supply

-Every output is shut down

30mA –Sigfox

20mA –LoRaWAN

Standby consumption (mA)

Condition:

-12V Power supply

-Every output is shut down

20 mA –Sigfox

N/A –LoRaWAN

Condition:

- 24V Power supply

-Every output is shut down

15 mA –Sigfox

N/A –LoRaWAN

Input high level voltage (V)

2.8V

with Pull-Down

30V

(recommended)

2.3V

with Pull-Up

Input low level voltage (V)

with Pull-Down

1.3V

with Pull-Up

0.15V

Dry contacts tensions of outputs

(V)

10V

Power supply tension

30V

Dry contacts outputs current (mA)

250 mA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Wireless Barcode-Lesegerät Handbücher

Wireless

Wireless 2877 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung