WIS WIS-EAP500-WALL Bedienungsanleitung

Model: WIS-EAP500-WALL

WIS-EAP510-WALL

WIS-EAP520-WALL

www.wisnetworks.in

Quick Installation Guide

Wall AP

Only Suitable for safe use in

non-tropical climatic conditions.

Suitable for safe use in areas

below 2000 meters above sea level

2000m≤

Front

Back

WAN

System boots up successfully

Explanation

SYSTEM LED Green

LED Indicator Designation Normal status

Port Explanation

LED indicator definition

01 / Product introduction

Ports Definition

Operation environment

Connect to internet through ADSL modem or FTTH broadband. Under AP and repeater mode, WAN port

will be changed to LAN port

WAN

02 / Device installation

Step 1: Remove AP top cover with screw driver

Open top cover from here AP main body AP top cover

AP main body AP cover

①.Open wall socket cover

②.Insert LAN cable into RJ45

port at backside of the AP

③.Put AP into the wall socket

④.Fix the AP with screws

⑤.Install the cover onto AP,

finish installation

Steps

AP main bodyConnect to POE switch

Step 2: Install AP

Bypass mode topology：

POE Switch

Laptop Mobile Monitor

Router

Cloud Server

INTERNET

AP1 AP2 AP3

03 / Device connection

AC Gateway mode topology：

Tips: If the AP supports 24V POE, pls use 24V PoE switch or POE adapter; if the AP is a standard

48V POE device, please use a standard IEEE802.3at POE switch or POE adapter. When deploy a large

wireless network, there are many APs in this network, it is recommended to use a wireless AC controller

in the network to centrallized-manage all APs in the network.

Laptop Mobile Monitor

Cloud Server

INTERNET

AC(AC gateway all in one)

POE Switch

AP1 AP2 AP3

Set PC wireless network card IP

04 / Device management

Connect PC by wireless

1.To connect an AP wirelessly, you need set the IP address of the TCP/IP properties of the

wireless network card to 192.168.2.2 (X is number range of 2-252) first, so that the AP

and PC in the same IP segment, and set the subnet mask to 255.255.255.0, as shown in

the following picture:

Management from WEB UI

4.1

2.2

2.After setting the IP address of PC, connect PC with AP in wireless,

double-click "Wireless network Connection", in the pop-up wireless SSID list,

select "Wireless 2.4G", click "Connect", then enter the password in the pop-up

password dialogue box, the default password is "66666666", click "OK" to

connect.

View wireless connection

NETWORK

WIS 2.4

Connect PC by wired port

Using the wired connection, set the IP address of the TCP/IP properties of the wired network card

to 192.168.188.X (X is number range of 2---252), and the PC will be the same IP segment as AP.

2.2

1.Use Internet Explorer to visit http://192.168.2.2, pop up the login dialogue box shown

in the following picture, input the default login password: admin, then press “Login” to

enter the wireless AP’s management user interface page.

Input password

Information

Settings

2.By default it is in Fit AP mode, users need click the button at the right corner

to change it to FAT AP mode if needed.

Apply Reset Reboot

IP Address

Subnet

Mac Address

Gateway

AC Address

192.168.2.2

255.255.255.0

44:D1:FA:75:BF:3F

192.168.2.2

172.16.0.1

IP Mode DHCP

Fit AP

Information

Settings

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere WIS Netzwerk-Hardware Handbücher

WIS

WIS WIS-EAP510-OUTDOOR Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung