Wisenet PRN-4011 Installationsanleitung

NETWORK VIDEO RECORDER

Quick Manual

PRN-4011

Package Contents

REC

1 2 3 4

5 6 7 8

9 10 11 12

ALARM POWER

BACKUP NETWORK RAID

USB

HDD

NVR Mouse Power Cable Smart Viewer / User Manual CD

User Manual or Quick Manual Terminal block Rack mount Rack mounting screw

HDD Fixing Screw HDD door lock key

Connecting an optical module

The rated power for an optical module is DC 3.3V 0.25A.

`When an optical module is installed, the use of the UTP port is limited.

`Install an optical module only when one is needed.

VGA

L.FAN R.FAN

HDMI

AUDIOOUT

CONSOLE

NETWORK1

NETWORK1 NETWORK 3

NETWORK2 iSCSI

NETWORK2

OPTICAL OPTICAL

RS-232

Rx G 1

COM COM COM

NO NO

2 3 4

ALARM

RESET

432

COM

NCG

ALARM

OUT

ALARM

ALARMOUT

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

1 [OPTICAL NETWORK1] is a port that is shared with

[NETWORK1].

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

2 [OPTICAL NETWORK2] is a port that is shared with

[NETWORK2].

[OPTICAL NETWORK1/2] is a port that is shared

with [NETWORK1/2].

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

NETWORK 1

NETWORK 1 NETWORK 3

NETWORK 2 iSCSI

NETWORK 2

OPTICAL OPTICAL

Features

The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk.

It also provides remote monitoring environment for video and audio over the network using a remote computer.

• User-friendly UI

• Supports a range of 4K camera resolutions (3840X2160, 4096X2160, 4000X3000)

• Outputs a 4K high definition image using HDMI

• 64 split screens decoding

• Supports dual monitor output (expand, duplicate)

• Supports multiple passwords

• Record and play video

• Record and play audio

• Supports ONVIF Profile S standard and RTP / RTSP protocols

• Display the HDD operation status by HDD SMART

• HDD overwrite enabled

• Backup using USB 2.0 protocols and external HDD

• Simultaneous play of 16 channels

• Various Search Modes (Time, Event, Smart, Text, Backup, ARB)

• Various Recording Modes (Normal, Event, Scheduled Recording)

• Alarm Input / Output

• Remote Monitoring function by Windows Network Viewer

• Live monitoring of the network camera

• Installation Wizard Function (Easy Setup)

• Supports remote viewer multi profiles

• Supports ARB

• Supports Failover

• Function used to set the storage period for each channel

Installing the HDD

1 Press the <PUSH> button on the front to open the

front cover.

2 After pressing the blue button in the HDD bracket,

pull it manually to separate the HDD bracket from

the main body.

REC

1234

5678

910 11 12

ALARM POWER

BACKUP NETWORK RAID

USB

HDD

3 Mount a HDD in the HDD bracket and screw it in

using the screws provided.

4 Once the HDD is mounted in the bracket, push the

bracket into the main body and close the front cover.

`If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD

manually in the set before use.

`For replacement or installation of an additional HDD you must contact your dealer or our customer center.

Install Wizard

1 Select the language

Select your preferred language.

2 Set Password

Set a password.

※Click icon to see the password rule

8 ~ 9 characters : All combination of English character, Digit, Special character

10 ~ 15 characters : Two combination of English character, Digit, Special character

※Not allowed to use same characters with ID

※Not allowed to use 4 or more continuative or repeated characters

2-1. Setting Camera Password

You can change the password of the camera one step.

If the password of the camera is the default password set in the factory, enter a new password to change it. The

password will be changed, and the new password will be registered.

If the password of the camera is not the default password set in the factory, enter the current camera password.

The current camera password will be registered.

- New Password : Input a new password according to the password setting rules.

- Confirm Password : Input the new password again.

`A camera password registered with ONVIF and RTSP cannot be changed.

3 Set up Network

•DHCP server : If the DHCP server is set to enable, an IP is automatically assigned to the camera.

•Network 1 (Camera) /Network 2 (Camera) : Connects to the camera and receives the video feed from the

camera.

`When a UTP cable is connected, UTP is displayed on the screen, and when an Fiber Optic Cable is connected, OPTIC is displayed

on the screen.

•Network 3 (Viewer) : This is a port for transmitting an image to the webviewer.

•Network 4 (iSCSI) : This is a port for connecting an external iSCSI.

•Network 1 / Network 2 / Network 3 / Network 4 Setup

- IP Type : Choose the network connection method.

- IP Address, Subnet Mask, Gateway, DNS

※For more details on network settings, refer to the User manual.

► To use a simple intranet, click <Next>.

Additional camera registration

In the <Install Wizard> setting, make a connection to the camera automatically registered and use the menu

path to register and connect a camera.

Menu ;Device ;Camera ;Cam Registration ;Auto

b c e

To register a camera, follow these steps:

aSelect the camera to register (you can select multiple cameras).

bClick <ID/PW> to register your ID and password. (If you do not register a new ID/PW, then the default

ID/PW combination is used.)

cClick <Connection Test>.

dCheck the connection results.

eIf the channel connected successfully, click <OK> to end the camera registration process.

`Click an item on the table to see a preview (you must change the ID/PW in step bif the camera account changes).

`Click the table headers to sort the content.

`Click < > to check if a new IP address was allocated to the camera when you rescan the network or when an IP

address was not assigned by the DHCP server (e.g., 192.168.1.100). If the IP still stays the same, then select Assign IP to

assign the IP manually.

4 Set Date & Time

Set the time and date and click the <Finish> button, and the installation will be completed.

5Camera Registration

When the installation wizard finishes, the camera is automatically registered.

5-1. If there are 64 or less cameras searched, it will be automatically registered and the camera information(fps, days

of recording) will be displayed.

► Select <OK> and the frame rate of all cameras registered is set to 30fps and the installation session is

completed.

► When you select <Manual Setting>, the frame rate of all cameras registered can be set to a value selected

by the user (move to 5-2).

5-2. Adjust the recording framerate

Changes the recording frame rate for all cameras at once.

Please note that the estimated recording days vary depending on the frame rate.

< Figure 5-1 > < Figure 5-2 >

5-3. If there are more than 64 cameras searched, Camera registration window will be displayed.

Select a camera to register and click the <Register> button. Once camera registration is finished, proceed in 5-1.

< Figure 5-3 >

After selecting a camera, press the register button.

Number of Searched Cameras

Refresh

Status

Model

MAC

Network

Connected Authentication errors Disconnected

Exit

0/64

Camera Register

Configuring the Recording

This section outlines how to configure and view the recording settings for each channel.

FULL NO RAIDRAID

SCSI

Recording Restriction

Record data size exceeded limitation

Only key frames are recorded

Please check the record settings

Do not show this message again

OK Record Status

aShows the standard and event recording method for each channel.

•FULL : Records all the frames received from the camera.

•KEY : Records only the key frames received from the camera. In general, one or two frames per second

are recorded, but you can adjust this in the camera settings.

•OFF : Turns off recording.

bShows the transmission size of the recording data for each channel.

cShows the data size limit for each channel.

`The orange colored channel indicates the case where the

input data load is greater than the

permitted data load.

If you set the

permitted data load to greater than the

input data loads, it will be changed to orange.

`If the sum of input data for each channel is greater than the max level for the camera, then

the recording exceeding icon

and the alarm message will be displayed. In this case, for the channel exceeding the input limit will record the main

frame(one or two per second) only.

Setting Up the Camera

From the setup menu, you can configure the camera settings (resolution, frame rate, and quality) and other

functional settings.

Menu ;Device ;Camera ;Camera setup

Camera function settings: You can configure the camera

settings or the live movie format to change the settings in the

camera itself.

•Add : Adds a camera profile.

•Delete : Deletes the selected profile from the list.

•Profile : Specifies the movie profile of the connected camera in the camera settings.

•Codec : You cannot change the codec of the selected profile.

•Resolution : Specifies the resolution of the selected profile.

•Frame Rate : Specifies the frame rate of the selected profile.

•Bitrate Control : Specifies the bitrate of the video transmitted for the selected profile.

Setting Up a Channel

From the channel setup menu, you can change the camera name shown in live mode.

Menu ;Device ;Camera ;Channel setup

Configure and run layout

You can use the same layout set on the live screen for the Search Time function in order to perform a search using

the channel sequence and combination configured by the user.

`For more information about the detailed setting method for each stage, refer to the user manual.

1 Live channel layout settings

def

aOpen the channel layout setup menu.

bClick <New>.

cEnter a name for the selected channels (e.g., PARKING).

dSelect the channels that you want to add to the layout (e.g., 1, 2, 3, 4).

eChoose a split mode to apply (e.g., 4-way split).

fClick <OK>.

gChoose a layout to view it on the screen (e.g., change to PARKING).

2 Enter Search

aIn live mode, right-click to select <Search>.

Select <Time Search>.

3 Select a desired channel layout in the live screen

aThe initial search option is set to <All Channels>. Select a desired layout from among the channel group created

in the live screen.

bSelect a channel for each selected group.

cMove the time bar to view the preview screen as shown in Figure d.

ePress the <Play> button to enter the play screen.

4 Play

a b

aThese are the various functions available for playback. Hover over them and a tool tip will be prompted.

Control the playback by referring to the tool tip.

(Ex : Skip Backward)

bYou can configure specific functions in athrough playback settings.

Ex) Jump to play: 10 minutes, 30 minutes, 1 hour, 24 hours, etc.

cDisplays functions that are operating in split mode and during other playback.

Parking lot layout (live)

Full screen (live) Parking lot layout (play)

When running the layout set on the live screen in the search menu, the layout is played in the following order.

 Tip

Use the basic guide

Show shortcut menu

Right-click on the live screen and you can access various functions that NVR provides. Hover over an icon and a brief

definition of term for each function is prompted.

Live launcher

aYou can configure a live layout.

bYou can configure a supported split mode. You can view the end sequence ( ) in serial order for a specific

period of time for each split mode.

cYou can configure additional functions in the live screen, such as alarm control or audio.

Full Screen 

Layout 

Keep ch. scr ratio

Status 

PTZ Control

ZOOM

Audio 

Freeze

Stop Alarm

Capture

Record

Play

Backup

Shutdown

Logout

Hide Launcher

RES : 1920*1080( H.264)

SET/ IN/DE C : 20/12.5 /12.5

SNB-6 004 (S) - ARB

Use product information

You can check product information/user manual/firmware information/FAQ/HDD compatibility list, etc. on the website

or mobile app on your smartphone.

ab c

http://hanwha-security.com

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB

cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly

to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of

where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic

accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their

working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive

2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery

return system.

Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide

customers with more environmentally friendly products.

The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates

that the product satisfies the EU RoHS Directive.

Head Oce

6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si,

Gyeonggi-do, 463-400 Rep. of KOREA

Tel : +82.70.7147.8753 Fax : +82.31.8018.3740

http://hanwha-security.com

Hanwha Techwin America

500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666

Toll Free : +1.877.213.1222 Direct : +1.201.325.6920

Fax : +1.201.373.0124

www.hanwhasecurity.com

Hanwha Techwin Europe

Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom

Tel : +44.1932.57.8100 Fax : +44.1932.57.8101

www.hanwha-security.eu

Hanwha Techwin(Tianjin) Co.Ltd

No.11, Weiliu Rd., Micro-Electronic Industrial Park, Jingang Road Tianjin 300385, China

Tel : +86.22.2388.7788

www.hanwha-security.cn

Hanwha Techwin Middle East FZE

JAFZA View 18, 20th oor, oce 2001, 2002, 2003, Downtown Jebel Ali,

Dubai, United Arab Emirates

http://hanwha-security.com

Inhaltsverzeichnis

Andere Wisenet Netzwerk-Hardware Handbücher

Wisenet

Wisenet PRN-3210B2 Bedienungsanleitung

Wisenet

Wisenet SRB-160S Bedienungsanleitung

Wisenet

Wisenet ARN-410S Montageanleitung

Wisenet

Wisenet QRN-420S Bedienungsanleitung

Wisenet

Wisenet XRN-420S Bedienungsanleitung

Wisenet

Wisenet XRN-410S Installationsanleitung

Wisenet

Wisenet XRN-1620B2 Bedienungsanleitung

Wisenet

Wisenet PRP-4000H8 Bedienungsanleitung

Wisenet

Wisenet QRN-1630S Bedienungsanleitung

Wisenet

Wisenet XRN-2010 Installationsanleitung

Wisenet

Wisenet XRN-815S Bedienungsanleitung

Wisenet

Wisenet XRN-810S Bedienungsanleitung

Wisenet

Wisenet QRN-810S Installationsanleitung

Wisenet

Wisenet XRN-6410RB2 Bedienungsanleitung

Wisenet

Wisenet SNR-73207W Bedienungsanleitung

Wisenet

Wisenet PRN-3205B2 Bedienungsanleitung

Wisenet

Wisenet PRN-3210B2 Bedienungsanleitung

Wisenet

Wisenet XRN-2010 Installationsanleitung

Wisenet

Wisenet TAW-4000H16 Bedienungsanleitung

Wisenet

Wisenet XRP-4310DB4 Bedienungsanleitung

Wisenet

Wisenet PRN-6400DB4 Bedienungsanleitung

Wisenet

Wisenet SPD-1660R Installationsanleitung

Wisenet

Wisenet PRN-6400DB4 Bedienungsanleitung

Wisenet

Wisenet QRN-810S Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung