WOERLEIN Soundmaster SCD5800 Bedienungsanleitung

DEUTSCH

ESPANOL

ENGLISH

PORTUGUÊS

FRANÇAIS

SVENSKA

NEDERLANDS

ČEŠTINA

ITALIANO

SLOVENSKÝ

SCD5800

Hersteller

Wörlein GmbH Tel.: +49 9103/71670

Gewerbestrasse 12 Fax.: +49 9103/716712

D 90556 Cadolzburg Email. info@woerlein.com

GERMANY Web: www.woerlein.com

Safety, Environmental and Setup Instructions

ENVIRONMENTAL PROTECTION

Do not dispose of this product with the normal household

waste at the end of its life cycle. Return it to a collection

point for the recycling of electrical and electronic devices.

This is indicated by the symbol on the product, user

manual or packaging

The materials are reusable according to their markings. By

reusing, recycling or other forms of utilization of old devices you

make an important contribution to the protection of our

environment.

Please contact your local authorities for details about collection

points.

WARNING

Risk of electric shock

Do not open!

Caution: To reduce the risk of electric shock, do not remove the

cover (or back). There are no user serviceable parts inside.

Refer servicing to qualified service personnel.

This symbol indicates the presence of dangerous

voltage inside the enclosure, sufficient enough to

cause electric shock.

This symbol indicates the presence of important

operating and maintenance instructions for the device

Used batteries are hazardous waste and NOT to be

disposed of with the household waste! As a

consumer you are legally obligated to return all

batteries for environmentally responsible recycling –

no matter whether or not the batteries contain harmful

substances*)

Return batteries free of charge to public collection points in your

community or shops selling batteries of the respective kind.

Only return fully discharged batteries

*) marked Cd = cadmium, Hg = mercury, Pb = lead

Only use mercury and cadmium-free batteries.

Used batteries are hazardous waste and NOT to be

disposed of with the household waste!!!

Keep batteries away from children. Children might swallow

batteries.

Contact a physician immediately if a battery was swallowed.

Check your batteries regularly to avoid battery leakage.

Batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

CAUTION: Danger of explosion if battery is incorrectly

replaced

Replace only with the same or equivalent type

CAUTION - INVISIBLE LASER

RADIATION WHEN OPENING THE

COVER OR PRESSING THE SAFETY

INTERLOCK. AVOID EXPOSURE TO

THE LASER BEAM.

To prevent possible hearing damage, do not

listen at high volume levels for long periods

Use the device in dry indoor environments only.

Protect the device from humidity.

This apparatus is for moderate climates areas use,

not suitable for use in tropical climates countries.

No objects filled with liquids, such as vases,

shall be placed on the apparatus.

The mains plug or an appliance coupler is used

as the disconnect device, the disconnect devices

shall remain readily operable.

Connect this device to a properly installed and

earthed wall outlet only. Make sure the mains

voltage corresponds with the specifications on

the rating plate.

Make sure the mains cable stays dry during

operation. Do not pinch or damage the mains

cable in any way.

A damaged mains cable or plug must

immediately be replaced by an authorized service

center.

In case of lightning, immediately disconnect the

device from the mains supply.

Children should be supervised by parents when

using the device.

Clean the device with a dry cloth only.

Do NOT use CLEANING AGENTS or ABRASIVE

CLOTHS!

Do not expose the device to direct sunlight or

other heat sources.

Install the device at a location with sufficient

ventilation in order to prevent heat accumulation.

Do not cover the ventilation openings!

Install the device at a safe and vibration-free

location.

Install the device as far away as possible from

computers and microwave units; otherwise radio

reception may be disturbed.

Do not open or repair the enclosure. It is not safe

to do so and will void your warranty. Repairs only

by authorized service/ customer center.

No naked flame sources, such as lighted

candles, should be placed on the unit.

When you are necessary to ship the unit store it

in its original package. Save the package for this

purpose.

In case of malfunction due to electrostatic

discharge or fast transient (burst), remove and

reconnect the power supply.

If the unit is not using for a long period of time,

disconnect it from the power supply by

unplugging the power plug. This is to avoid the

risk of fire.

SCD5800 / English Instruction Manual

LOCATION OF CONTROLS

FRONT VIEW

TOP VIEW

BACK VIEW

SKIP+ / TUNING+ button

Speaker

SKIP- / TUNING - button

Cassette cover

STOP button

Antenna

PLAY / PAUSE / CLOCK button

CD cover

STANDBY / FUNCTION button

Handle

Display

Speaker

PRE+ / FOLDER+ button

Buttons for Cassette

SCAN / PROG button

Headphone jack

VOLUME+ button

Microphone jack

VOLUME- button

USB jack

Disco light effect button

AC socket

SCD5800 / English Instruction Manual

INSTALLATION

CONTENT OF DELIVERY

Main unit

Microphone

Instruction manual

AC power cable

Select a suitable location for the device, such as a dry, flat, non-slip surface on which it is

easy to operate the machine.

Ensure that the device is sufficiently ventilated.

POWER SUPPLY

Ensure that the voltage is the same as that indicated on the model identification plate.

Connect the power cable supplied to a properly installed safety power socket and the mains

connector AC on the back of the machine.

If you do not use the device for a long time, we recommend disconnecting the device from

the mains.

INSERTING THE BATTERIES

1. Open the lid of the battery compartment.

2. Insert 6 batteries of type UM-2 (“C”size) 1.5 V. Please ensure that the polarity is correct (see

the floor of the battery compartment)!

3. Then close the battery lid.

NOTE:

When the power cord is plugged in, the batteries will not work.

ERP power management

The unit will turn off automatically after 10 minutes in standby mode if there is no audio

signal. To turn on the unit again press the “STANDBY / FUNCTION” button.

SETTING CLOCK

The system must be in standby mode in order to set the clock.

1. Press and hold the “PLAY / PAUSE / CLOCK” button for approx.2 seconds.

2. Use the “SKIP+ / TUNING+” & “SKIP- / TUNING-”buttons to set the time format “12 / 24hr”.

3. Press the “PLAY / PAUSE / CLOCK” button to confirm time format.

4. Use the “SKIP+ / TUNING+” & “SKIP- / TUNING-”buttons to set the hours accordingly. The

hour digits start flashing.

5. Press the “PLAY / PAUSE / CLOCK” button to confirm the hour.

6. Repeat step 4 and 5 to set the minute.

NOTE: If the voltage is interrupted, the time is lost

BASIC OPERATION

SWITCH DEVICE ON/OFF

Press the “STANDBY / FUNCTION” button to turn on the device.

Press the “STANDBY / FUNCTION” button for approx. 3 seconds to switch into the standby

mode.

ADJUSTING VOLUME

Press the “VOLUME –“ or “VOLUME +“ button to decrease or increase the volume.

SCD5800 / English Instruction Manual

RADIO

1. Select the radio mode with the “STANDBY / FUNCTION”button, until “RAD” is shown in the

display and after that the radio frequency.

2. For FM reception: Completely extend the telescopic antenna. Change its position to improve

the reception.

3. There are two options to search for and preset radio stations.

Automatic scan:

Important! All preset radio stations will be overridden.

Press and hold the "SCAN / PROG" button for approx.3 seconds. The system scans the

entire frequency band for radio stations. Any stations found will be preset from lowest to

highest frequency.

Manual scan for audio stations:

Briefly press the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons, until you have found the

radio station which you are looking for. If you keep one of the buttons pressed down, the

device will search to the previous, respectively next radio station.

Preset station

1. Select the desired station.

2. Press the "SCAN / PROG" button. The display shows "P ..." and the next free memory

flashes. By repeatedly pressing the "PRE + / FOLDER +" button, you can also select a

desired memory location yourself. If a station has already been stored on this program

station, it will automatically be overwritten.

3. Press the "SCAN / PROG" button again to confirm the station to the program station.

1. Select the CD mode with the “STANDBY / FUNCTION”button, until “CD” is shown in the

display.

2. Open the CD compartment by pulling the lid upwards by the tab.

3. Insert an audio CD with the printed side facing upwards on to the central cone so that the

CD clicks into place and then close the lid of the CD compartment.

4. The CD will play from the first title.

5. In order to remove a CD, please press the “STOP”button, open the CD compartment and

lift the CD out carefully.

Always keep the CD deck closed.

For operation, please refer to the section “CONTROL BUTTONS”.

NOTE:

If a disc is inserted the wrong way around, respectively if no disc is inserted, then the

message “NO “ appears in the display.

Playback of self-recorded CDs can not be guaranteed due to the wide variety of available

software and CD media.

SCD5800 / English Instruction Manual

USB

This device has been developed in line with the latest technical advances in the USB field. The

wide range of different USB storage devices of all types which are currently on the market,

unfortunately do not allow us to guarantee full compatibility with all USB storage devices. For

this reason, in rare cases there may be problems in playing back files from USB storage

devices. This is not a malfunction of the device.

1. Select the USB mode with the “STANDBY / FUNCTION”button, until “USB” is shown in the

display.

2. Connect a USB storage device directly into the port. The playback will automatically start

after a few seconds.

For operation, please refer to the section “CONTROL BUTTONS”.

NOTE:

Always directly connect a USB storage medium to the USB port to prevent any

malfunctions.

The USB port is not designed for charging external devices.

CAUTION:

Switch the device to a different operating mode before you remove the USB storage device.

CONTROL BUTTONS

NOTE:

Depending on the player, not all features may be supported.

PLAY / PAUSE / CLOCK

You can briefly interrupt and resume playback using this button. The display shows the

elapsed playback time flashing. Pressing again continues playback.

Press and hold this button during operation to briefly display the current time.

SKIP+ & SKIP-

With “SKIP+ / TUNING+”button you can jump to the next or previous track etc.

If the button is kept pressed down, the machine starts to search through the tracks.

The “SKIP- / TUNING-” button can be used as follows:

Press once = This starts the current track again from the beginning.

Press twice = This jumps back to the previous track.

STOP

The playback is stopped.

SCAN / PROG

In stop mode for programming any order of tracks (see the section on “Programmed Play”).

SCD5800 / English Instruction Manual

During the playback of an audio CD:

Press once = the current track is repeated continuously. The display will show the “REP”logo.

Press twice = the whole CD is played continuously. The display will show the “REP”logo +

“ALL”.

Press three times = all tracks will be played in random order. The display will show “RAND”.

Press four times = back to the normal play mode.

During playback of MP3 music (Under USB and CD-MP3 mode):

Press once = the current track is repeated continuously. The display will show the “REP”logo.

Press twice = the selected folder is repeated continuously. The display will show the “REP”logo

+ “ALBUM”.

Press three times = the whole CD is played continuously. The display will show the “REP”logo

+ “ALL”.

Press four times = all tracks will be played in random order. The display will show “RAND”.

Press five times = back to the normal play mode.

PRE. /FOLDER

Use the “PRE.+ / FOLDER+”button to chose the folder.

Programmed Play

This can be used to program any desired sequence of tracks.

1. Press the “STOP”button.

2. Press the "SCAN / PROG" button. “P_01” will start to flash.. P_01 means the storage space

Use the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons to select the desired track and

then press the "SCAN /PROG" button again.

The display “P_01”will be changed to “P_02”.

3. Select the next track with the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons and press

the "SCAN /PROG" button again. Repeat the procedure until all the desired tracks are

selected.

NOTE: Once the storage capacity of the tracks to be programmed has been reached

“PROGFULL” will show in the display.

4. Press the “PLAY / PAUSE / CLOCK”button. The playback starts.

The lower-left of the display will show “PROG”.

5. Press the button to interrupt the playback while retaining the program.

6. To play the programmed back again, press the “PLAY / PAUSE / CLOCK”button.

7. To delete the program, press the “STOP”button twice. The notification “PROG” will

disappear.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in MP3 format. The device also

supports all standard CD types: CD, CD-RW, CD-R.

This machine of is able to play MP3 CDs. Up to 99 track scan be compressed and stored on

these CDs. Your machine detects an MP3 CD automatically (the total number of tracks and

MP3s appears in the display). If you would like to play one of these CDs, proceed as described

under “Playing CDs/MP3”. Tracks can be programmed as described under “Playing Back

Programmed Tracks”.

SCD5800 / English Instruction Manual

CASSETTE

Playing Cassettes

1. Select the Tape mode with the “STANDBY / FUNCTION”button, until “TAPE” is shown.

2. Press the “STOP/EJECT”button to open the cassette compartment.

3. Insert a recorded audiocassette into the compartment with the tape opening facing upwards

and the side you wish to listen to facing the front (full spool to the right). Then close the

cassette compartment again.

4. Press the “PLAY”button to listen to the tape.

5. With the “STOP/EJECT”button you can stop play-back.

6. Wind the tape forwards or backwards if necessary in the direction of the arrow keys.

7. Always press the “STOP/EJECT”key when changing the direction or stopping the tape.

This prevents damage to the machine and the tape.

8. If the “STOP/EJECT”button is pressed again the flap of the cassette compartment opens.

9. In order to interrupt playback briefly, press the “PAUSE”button. Pressing again continues

playback.

Cassette Record

1. Insert an audio cassette into the cassette compartment. Make sure the cassette write-

protect has not been removed.

2. Select the function mode you want to record from and start playback if necessary.

3. Press the "RECORD" button on the cassette section to start recording.

4. If you want to stop recording, press the "PAUSE" button on the cassette part. To resume

recording, press the button again.

5. To stop recording, press the "STOP / EJECT" button on the cassette section.

MICROPHONE

1. Plug the microphone into the "MIC" socket on the back of the device.

2. Turn on the microphone.

3. Pressing the "VOLUME-" and "VOLUME +" buttons will change the volume of the selected

source as well as the microphone volume.

4. If you press the "RECORD" button on the cassette part, the recording starts.

Note: In cassette mode, the microphone is not useable.

HEADPHONE

To listen to music privately, use headphones with a 3.5 stereo jack plug and connect to the

headphones socket on the back of the system. The speakers will then be muted.

DISCO LIGHT EFFECT

Press the "LIGHT" button to turn the disco light effect on or off.

TECHNICAL SPECIFICATION

Power supply

AC 230V ~ 50Hz

Battery supply

6x LR14, UM-2 (“C” size) 1.5 V

Frequency range FM

87.5 –108MHz

Preset station

30 FM

Audio output power

2x 1,5W RMS

Technical changes and misprints reserved.

Duplication only with the permission of Woerlein GmbH

HERSTELLER / IMPORTEUR

Wörlein GmbH

Gewerbestraße 12

D 90556 Cadolzburg, Germany

Tel: +49 9103 71 67 0

Fax: +49 9103 71 67 12

E-Mail: [email protected]

Hiermit bestätigt Wörlein GmbH, dass sich dieses Gerät in

Übereinstimmung mit den grundlegenden Anforderungen

und den übrigen einschlägigen Bestimmungen der Richtlinie

2014/53/EU befindet.

Eine Kopie der Konformitätserklärung kann unter

obenstehender Adresse bezogen werden.

Hereby, Wörlein GmbH declares that this device is in

compliance with the essential requirements and other

relevant provisions of Directive 2014/53/EU.

A copy of the declaration of conformity can be obtained

from the above address.

Par la présente, Wörlein GmbH déclare que cet appareil est

conforme aux exigences principales et autres clauses

applicables de la Directive 2014/53/EU.

Une copie de la déclaration de conformité peut être obtenue

à l'adresse ci-dessus.

Wörlein GmbH verklaart hierbij dat dit apparaat in

overeenkomst is met de essentiële vereisten en andere

relevante bepalingen van de Richtlijn 2014/53/EU.

Een kopie van de conformiteitsverklaring kunt u verkrijgen

op het hierboven vermelde adres.

Con la presente, Wörlein GmbH dichiara che questo

dispositivo è conforme ai requisiti essenziali e altre

disposizioni contenute nella Direttiva 2014/53/EU.

Una copia della dichiarazione di conformità può essere

richiesta all'indirizzo sopra indicato.

Härmed Wörlein GmbH deklarerar att denna enhet är i

överensstämmelse med de grundläggande kraven och andra

relevanta bestämmelser i direktiv 2014/53/EU.

En kopia av försäkran om överensstämmelse kan erhållas

från ovanstående adress.

Herved Wörlein GmbH erklærer, at denne enhed er i

overensstemmelse med de væsentlige krav og øvrige

relevante krav i direktiv 2014/53/EU.

En kopi af overensstemmelseserklæringen kan hentes fra

ovennævnte adresse.

Tímto Wörlein GmbH prohlašuje, že toto zařízení je ve shodě

se základními požadavky a dalšími příslušnými ustanoveními

směrnice 2014/53/EU.

Kopii prohlášení o shodě lze získat na výše uvedené adrese.

Por este meio, Wörlein GmbH declara que este dispositivo

está em conformidade com os requisitos essenciais e outras

disposições da Directiva 2014/53/EU.

Uma cópia da declaração de conformidade pode ser obtida

no endereço acima.

Wörlein GmbH confirma que este dispositivo cumple con los

requisitos esenciales y otras disposiciones relevantes de la

Directiva 2014/53 / UE.

Se puede obtener una copia de la declaración de

conformidad en la dirección anterior.

Wörlein GmbH týmto potvrdzuje, že toto zariadenie je v

súlade so základnými požiadavkami a ďalšími príslušnými

ustanoveniami smernice 2014/53 / EÚ.

Kópiu vyhlásenia o zhode je možné získať na uvedenej

adrese.

Wörlein GmbH potrjuje, da je ta naprava v skladu z

bistvenimi zahtevami in drugimi ustreznimi določbami

Direktive 2014/53 / EU.

Kopijo izjave o skladnosti je mogoče dobiti na zgornjem

naslovu.

Wörlein GmbH confirmă prin prezenta că acest dispozitiv

respectă cerințele esențiale și alte prevederi relevante ale

Directivei 2014/53 / UE.

O copie a declarației de conformitate poate fi obținută de la

adresa de mai sus.

Wörlein GmbH patvirtina, kad šis prietaisas atitinka esminius

reikalavimus ir kitas atitinkamas Direktyvos 2014/53 / ES

nuostatas.

Atitikties deklaracijos kopiją galima gauti iš pirmiau nurodyto

adreso.

A Wörlein GmbH megerősíti, hogy ez az eszköz megfelel a

2014/53 / EU irányelv alapvető követelményeinek és egyéb

vonatkozó rendelkezéseinek.

A megfelelőségi nyilatkozat egy példányát a fenti címről

szerezheti be.

Wörlein GmbH potvŭrzhdava, che tova ustrostvo e v

sŭotvet·stvie sŭs sŭshtestvenite iziskvaniya i drugi prilozhimi

razporedbi na Direktiva 2014/53 / ES. Kopie ot deklaratsiyata

za sŭotvet·stvie mozhe da bŭde polucheno ot

goreposocheniya adres.

Wörlein GmbH kinnitab käesolevaga, et see seade vastab

direktiivi 2014/53 / EL olulistele nõuetele ja muudele

asjakohastele sätetele.

Vastavusdeklaratsiooni koopiat saab eespool nimetatud

aadressilt.

Wörlein GmbH vahvistaa, että tämä laite on direktiivin

2014/53 / EU olennaisten vaatimusten ja muiden asiaa

koskevien säännösten mukainen.

Kopio vaatimustenmukaisuusvakuutuksesta on saatavissa

edellä mainitusta osoitteesta.

Ar šo Wörlein GmbH apstiprina, ka šī ierīce atbilst Direktīvas

2014/53 / ES būtiskajām prasībām un citiem attiecīgajiem

noteikumiem.

Atbilstības deklarācijas kopiju var iegūt, izmantojot iepriekš

minēto adresi.

Wörlein GmbH bekrefter herved at denne enheten er i

samsvar med de vesentlige kravene og andre relevante

bestemmelser i direktiv 2014/53 / EU.

En kopi av samsvarserklæringen kan fås fra adressen ovenfor.

Wörlein GmbH niniejszym potwierdza, że to urządzenie jest

zgodne z zasadniczymi wymaganiami i innymi stosownymi

postanowieniami dyrektywy 2014/53 / UE.

Kopię deklaracji zgodności można uzyskać pod powyższym

adresem.

Inhaltsverzeichnis

Andere WOERLEIN CD-Player Handbücher

WOERLEIN

WOERLEIN SCD5350BL Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung