Wolf DO30PE/S/PH Bedienungsanleitung

E SERIES OVEN

INSTALLATION GUIDE

SPECIFICATIONS, INSTALLATION, AND MORE

E SERIES OVEN

Contents

3E Series Oven

4Specications

10 Installation

11 Troubleshooting

Features and specications are subject to change at any

time without notice. Visit wolfappliance.com/specs for the

most up-to-date information.

Wolf Customer Care 800.222.7820

Important Note

To ensure this product is installed and operated as safely

and efciently as possible, take note of the following types

of highlighted information throughout this guide:

IMPORTANT NOTE highlights information that is especially

important.

CAUTION indicates a situation where minor injury or product

damage may occur if instructions are not followed.

WARNING states a hazard that may cause serious injury or

death if precautions are not followed.

IMPORTANT NOTE: Throughout this guide, dimensions in

parentheses are millimeters unless otherwise specied.

IMPORTANT NOTE: Save these instructions for the local

electrical inspector.

wolfappliance.com

E SERIES OVEN

Product Information

Important product information, including the model and

serial number, are listed on the product rating plate. The

rating plate is located below the control panel on the right.

The oven door must be open to view the rating plate. Refer

to the illustration below.

If service is necessary, contact Wolf Factory Certied

Service with the model and serial number. For the name of

the nearest Wolf Factory Certied Service or for questions

regarding the installation, visit the contact and support

section of our website, wolfappliance.com, or call Wolf

Customer Care at 800-222-7820.

Rating plate location

RATING

PLATE

Wolf Customer Care 800.222.7820

SPECIFICATIONS

COMBINATION INSTALLATIONS

Wolf built-in ovens are designed and agency approved for

installation with Wolf cooktops, microwaves, and warming

drawers only. The nominal width of the oven should match

the nominal width of the cooktop. A built-in oven cannot be

installed below a Wolf rangetop.

For typical combination installations, refer to the Wolf

Design Guide.

The single oven may be installed next to another E series

single oven. You must allow for a 11/2"(38) space between

the oven openings. A separate inner wall is required for each

oven between the openings.

Installation Requirements

The E series oven can be installed in a standard or ush

inset application. If a cooktop is installed above the oven,

a minimum of 1/4"(6) is required between the units. The

location of the electrical supply within the oven opening may

require additional cabinet depth.

Finish the edges of the opening. They may be visible when

the door is open.

For standard installations, the face trim overlaps stiles and

rails. Refer to the chart below.

For ush inset installations, a minimum 1/4"(6) reveal is

required on all sides. To ensure consistent reveals, each

corner of the opening must be exactly 90°.

INSTALLATION REQUIREMENTS

BASE SUPPORT MIN

Single Oven 250 lb (115 kg)

Double Oven 400 lb (181 kg)

TRIM OVERLAP

Top 1/2"(13)

Bottom 1/8"(3)

Sides 11/16"(17)

wolfappliance.com

SPECIFICATIONS

Electrical Requirements

Installation must comply with all applicable electrical codes.

Locate the electrical supply ush with the back wall and

within the shaded area shown in the illustrations on the

following pages. For ease of installation, the electrical

supply for the oven can be placed in an adjacent cabinet

within reach of the conduit.

Performance may be compromised if the electrical supply is

less than 240 volts.

The oven is supplied with a conduit consisting of two

insulated hot lead conductors and a bare ground conductor.

The wiring diagram covering the control circuit is provided

with the oven.

ELECTRICAL REQUIREMENTS—30" SINGLE OVEN

Electrical Supply grounded, 240/208 VAC, 60 Hz

Service 30 amp dedicated circuit

Conduit 4' (1.2 m)

Total Amps 21

Max Connected Load 5.1 kW

ELECTRICAL REQUIREMENTS—30" DOUBLE OVEN

Electrical Supply grounded, 240/208 VAC, 60 Hz

Service 50 amp dedicated circuit

Conduit 5' (1.5 m)

Total Amps 37

Max Connected Load 8.9 kW

WARNING

The complete appliance must be properly grounded at

all times when electrical power is applied.

Grounding through the neutral conductor is prohibited

for new branch-circuit installations (1996 NEC); mobile

homes and recreational vehicles, or where local codes

prohibit grounding through the neutral conductor.

If aluminum house supply wiring is utilized, splice the

appliance copper wire to the aluminum house wiring

using special connectors design and agency certied

for joining copper and aluminum. Follow the connector

manufacturer's recommended procedure carefully.

Improper connection can result in a re hazard.

Rating plate location

RATING

PLATE

Wolf Customer Care 800.222.7820

SPECIFICATIONS

E Series Single Oven

STANDARD INSTALLATION

(127)

(102)

FRONT VIEW

SIDE

VIEW

NOTE: Location of electrical supply within opening may require additional cabinet depth.

24" (610)

OPENING

DEPTH

TOP VIEW

271/4"

(692)

OPENING

HEIGHT

281/2" (724)

OPENING WIDTH

wolfappliance.com

SPECIFICATIONS

E Series Double Oven

STANDARD INSTALLATION

(127)

(102)

FRONT VIEW

SIDE

VIEW

NOTE: Location of electrical supply within opening may require additional cabinet depth.

493/4"

(1264)

OPENING

HEIGHT

24" (610)

OPENING

DEPTH

281/2" (724)

OPENING WIDTH

17" (432)

TYPICAL

TOP VIEW

Wolf Customer Care 800.222.7820

SPECIFICATIONS

(127)

(102)

FRONT VIEW

SIDE

VIEW

283/8"

(721)

FLUSH INSET

HEIGHT***

3/4"(19)

3/8" (10)

15/16" (24)

25" (635)

FLUSH INSET

DEPTH

303/8" (772)

FLUSH INSET WIDTH***

1" (25)

11/4" (32)**

TOP VIEW

FINISHED

CLEATS*

ill be visible and should be finished to match cabinetry.

1" (25) for professional and transitional models and 11/4"(32) for contemporary model.

*Dimension provides minimum reveals.

NOTE: Location of electrical supply within opening may require additional cabinet depth.

E Series Single Oven

FLUSH INSET INSTALLATION

wolfappliance.com

SPECIFICATIONS

E Series Double Oven

FLUSH INSET INSTALLATION

(127)

(102)

FRONT VIEW

SIDE

VIEW

ill be visible and should be finished to match cabinetry.

1" (25) for professional and transitional models and 11/4"(32) for contemporary model.

*Dimension provides minimum reveals.

NOTE: Location of electrical supply within opening may require additional cabinet depth.

507/8"

(1292)

FLUSH INSET

HEIGHT***

17" (432)

TYPICAL

3/4"(19)

3/8" (10)

15/16" (24)

303/8" (772)

FLUSH INSET WIDTH***

25" (635)

FLUSH INSET

DEPTH

1" (25)

11/4" (32)**

TOP VIEW

FINISHED

CLEATS*

Wolf Customer Care 800.222.7820

Preparation

Before moving the oven, protect any nished ooring and

secure the oven door(s) closed to prevent damage.

Use an appliance dolly to move the oven near the opening.

Remove and recycle packing materials. Do not lift or carry

the oven by the door handle.

CAUTION

Do not lift the oven by the door handle. This will

damage the oven door and hinges.

OVEN DOOR REMOVAL

To lighten the load or to t through a doorway, the oven

door(s) can be removed. Remove only if necessary. Door

removal should be done only by a certied installer or ser-

vice technician.

To remove, open the oven door completely. Rotate both

hinge latches forward to the open position, then lift the door

up and out. Refer to the illustration below.

To reinstall, insert the door hinges into the frame openings,

then rotate the hinge latches to the closed position.

INSTALLATION

Electrical Connection

WARNING

Verify power is disconnected from the electrical box

before proceeding.

With the oven positioned directly in front of the opening,

feed the conduit through the opening in the cabinet platform

(if applicable). Depending on local codes, connect the oven

to the electrical supply following these steps for a three-wire

or four-wire system:

1Connect the black appliance wire to the black (L1) power

supply wire in the electrical box.

2Connect the red appliance wire to the red (L2) power

supply wire in the electrical box.

3Connect the ground appliance wire to the green/ground

house grounding wire in the electrical box.

4For a four-wire system, leave the white neutral wire in the

house electrical box unconnected. Seal with a wire cap.

CLOSED

OPEN

Oven door removal

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Wolf Ofen Handbücher

Wolf

Wolf E Series Leitfaden

Wolf

Wolf L Series Bedienungsanleitung

Wolf

Wolf e Series Bedienungsanleitung

Wolf

Wolf Speed Oven Bedienungsanleitung

Wolf

Wolf e Series Bedienungsanleitung

Wolf

Wolf SO36U Bedienungsanleitung

Wolf

Wolf M Series Leitfaden

Wolf

Wolf L Series Bedienungsanleitung

Wolf

Wolf CSO24TE/S Konfigurationshandbuch

Wolf

Wolf DO30F/S L Series Bedienungsanleitung

Wolf

Wolf e Series Bedienungsanleitung

Wolf

Wolf E Series Betriebsanleitung

Wolf

Wolf e Series Bedienungsanleitung

Wolf

Wolf E Series Bedienungsanleitung

Wolf

Wolf e Series Bedienungsanleitung

Wolf

Wolf M Series Bedienungsanleitung

Wolf

Wolf CSO30TM Bedienungsanleitung

Wolf

Wolf ICBSO30-2U/S-TH Leitfaden

Wolf

Wolf CSO30PM/S/PH Bedienungsanleitung

Wolf

Wolf ICBCSO24TESTH Bedienungsanleitung

Wolf

Wolf SO30TH Bedienungsanleitung

Wolf

Wolf DO30U/B Bedienungsanleitung

Wolf

Wolf e Series Bedienungsanleitung

Wolf

Wolf SO30-2U Bedienungsanleitung

Beliebte Ofen Handbücher anderer Marken

Bosch

Bosch HVA531NS0 Bedienungsanleitung

Electrolux

Electrolux EOF6P46X Bedienungsanleitung

NEFF

NEFF B44S32 5GB Series Bedienungsanleitung

Combi

Combi BLODGETT BC142GDS Bedienungsanleitung

AEG

AEG COMPETENCE 311704300 Bedienungsanleitung

Falcon

Falcon DOMINATOR PLUS G3106 Series Benutzerhandbuch

Rational

Rational SCC WE 61G Bedienungsanleitung

Smeg

Smeg DOSPA38X Installations- und Betriebshandbuch

Electrolux

Electrolux air-o-convect 20 GN 2/1 Bedienungsanleitung

Miele

Miele HR 1954-2 Bedienungsanleitung

KHIND

KHIND OT50 Bedienungsanleitung

Henny Penny

Henny Penny Smoker Box Bedienungsanleitung

Lang

Lang ECOD-AP Bedienungsanleitung

AEG

AEG BEK455310M Bedienungsanleitung

Frigidaire

Frigidaire FNGE90JGR Bedienungsanleitung

Hotpoint

Hotpoint FE9 S831 JSH IX Bedienungsanleitung

GE Advantium SCB2000 Bedienungsanleitung

AEG

AEG DE401301DM Bedienungsanleitung