Wolpac Controles Eficientes Engineering Dept. MT-101 Dec/2015 Rev.: 01 Page 3
2. Important Safety Instructions
General Instructions
The main features of Wolgate III, how it should be installed, as well as the care to be taken for the correct
operation of the equipment, are described in this manual. Read carefully before starting any type of
operation to ensure the total and full performance of the product.
Wolpac makes every effort to ensure that this manual is periodically reviewed and whenever significant
changes are made to the project. However, our continuous improvement policy may result in some minor
differences between the unit provided and the description provided in this document.
Electrical Precautions
The electrical energy used to supply this equipment has a voltage sufficient to endanger a person's life.
Before performing any maintenance or repair, you must ensure that the equipment has electrical insulation
and perform tests proving that this insulation is complete.
When the power supply cannot be interrupted, functional tests, maintenance and repairs of electrical units
must only be performed by persons fully qualified in relation to the hazard involved and that appropriate
precautions and training are taken.
Notes about Ownership
All information contained in this document is the property of Wolpac, possession of this manual and use of
the information is strictly limited to persons previously authorized by Wolpac.
Reproduction, transcription, server storage and translation into any language of this document or part thereof
is not permitted without prior authorization from Wolpac.
Changes to the Equipment
No product changes can be made without the authorization of Wolpac, who will be responsible for ensuring
that the proposed change is acceptable in safety and functionality aspects of the equipment. Only persons
authorized by Wolpac may make changes to the equipment.
Good Usage Practices
The equipment being installed should not be abandoned unless all potential electrical and mechanical
hazards have been safely remedied. A responsible person should be left in charge of the equipment when
there is a potential unsafe installation.
The following points below indicate good practices that will contribute to safety and avoid damage to the
equipment:
•Make sure that all electrical power is disconnected and disconnected before proceeding with any
type of work on the equipment.
•Never leave the equipment in a potential unsafe state.
•Only use the correct tools, preferably indicated in this manual.
•When working with the equipment, remove any jewelry that may be conductive, or clothing that may
become entangled in the mechanical parts of the equipment.
Important Notice
The Wolgate III is a safety product, any child or minor who is going to use the equipment must be supervised
and accompanied by a responsible adult. Wolpac is not responsible for any incidents if this rule is not
applied.
