Worx Landroid WR208 Bedienungsanleitung

Owner’s manual

(WR208 WR210 WR220

WR230 WR235)

MANUAL

Owner’s manual

Manuel utilisateur

Instrucciones de usuario

P04

P35

P68

Welcome

Contact information

Safety Instruction

Information on Landroid Vision

Get familiar with Landroid Vision

Component List

Getting to know Landroid Vision

Technical data

What’s in the box

Getting started

How Landroid Vision works

Preparation and planning

Start the Landroid Vision

Machine Setting

Connecting Landroid Vision to the internet

Maintenance

Keep it sharp

Keep it clean

Keep it charged

Keep it stored over the winter

Keep it updated

Remove the charging tower

Quick reference

Operation messages

Error messages

Troubleshooting

Warrranty

Page 05

Page 06

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 19

Page 22

Page 24

Page 26

Page 27

Page 28

Page 29

Page 31

Page 34

TABLE OF CONTENTS

Thank you for purchasing a Worx Landroid Robot Mower.

This manual will help you get set up and operate your Landroid safely and efﬁciently.

Support

www.worx.com/landroid-support

Customer Services Helpline

800-727-6260

We’re here to help:

Live Chat

www.worx.com/landroid-support

Welcome

WARNING: Some dust created by power sanding, sawing, grinding, drilling and

other construction activities contains chemicals known to the State of California

to cause cancer, birth defects or other reproductive harm. Some examples of

these chemicals are:

•Lead from lead-based paints;

•Crystalline silica from bricks and cement and other masonry products;

•Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that

are specially designed to ﬁlter out microscopic particles.

WARNING: This product can expose you to chemicals including lead and Di(2-

ethylhexyl)phthalate (DEHP) which are known to the State of California to cause

cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov.

WARNING: Read all safety warnings and all instructions.

Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/or serious injury.

Carefully read the instructions for the safe operation of the machine.

Save all warnings and instructions for future reference.

-This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

-Children should be supervised to ensure that they do not play with the appliance.

WARNING: For the purposes of recharging the battery, only use the detachable supply unit

provided with this appliance.

WARNING: To reduce the risk of injury to persons and damage to the machine, do not remove

battery pack before switching off the machine.

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Safe operation practices

Training

a) Read the instructions carefully. Make sure you understand the instructions and be familiar with

the controls and the proper use of the appliance.

b) Never allow people unfamiliar with these instructions or children to use the appliance. Local

regulations can restrict the age of the operator.

c) The operator or user is responsible for accidents or hazards occurring to other people or their

property.

Preparation

a) Ensure the correct installation of the automatic perimeter delineation system as instructed.

This machine works without boundary wire or virtual boundary. It can automatically identify the

working area and non-working area through the camera. Once the machine is turned on, the

camera will automatically turn on and work at the same time. The machine recognizes that the

lawn is the working area through the camera, and the non-working area that is not the lawn.

When the machine walks to the boundary between lawn and non-lawn, it will automatically turn

to return to the working area.

Add a magnetic strip to separate it from the neighbor’s lawn. The machine returns when it

General & Additional Safety Instruction

encounters a magnetic strip while mowing. Return along the magnetic strip when returning.

b) Periodically inspect the area where the appliance is to be used and remove all stones, sticks,

wires, bones, and other foreign objects. Periodically inspect and clean the boundaries between

grass and non-grass. Clearing boundaries helps the lawnmower to identify the working area.

c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not

worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

d) On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate.

e) WARNING! The lawnmower shall not be operated without the guard in place.

Operation

1. General

a) Never operate the appliance with defective guards, or without safety devices, for example

deﬂectors, in place.

b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at

all times.

c) Never pick up or carry an appliance while the motor is running.

d) Operate the disabling device from the appliance.

- Before clearing a blockage;

- Before checking, cleaning or working on the appliance.

e) It is not permitted to modify the original design of robotic lawnmower. All modiﬁcations are

made at your own risk.

f) Start robotic lawnmower according to the instructions. When the power key is switched on,

make sure you keep your hands and feet away from the rotating blades. Never put your hands

and feet under the mower.

g) Never lift up robotic lawnmower or carry it when the power key is switched on.

h) Do not let persons who do not know how robotic lawnmower works and behaves use the

mower.

i) Do not put anything on top of robotic lawnmower or its charging base.

j) Do not allow robotic lawnmower to be used with a defective blade disc or body. Neither should

it be used with defective blades, screws, nuts or cables.

k) Always switch off robotic lawnmower when you do not intend to use the mower. Robotic

lawnmower can only start when the power key is switched on and the correct PIN code has

been entered.

l) Keep your hands and feet away from the rotating blades. Never place your hands or feet close

to or under the body when robotic lawnmower is in operation.

m)To avoid using the machine and its peripherals in bad weather conditions especially when there

is a risk of lightning.

n) Not to touch moving hazardous parts before these have come to a complete stop.

o) For machines used in public areas, that warning signs shall be placed around the working area

of the machine. They shall show the substance of the following text:

Warning! Automatic lawnmower! Keep away from the machine! Supervise children!

2. Additionally when the appliance is operating automatically

a) Do not leave the machine to operate unattended if you know that there are pets, children or

people in the vicinity.

Maintenance and storage

WARNING! When the mower is turned upside down the power key must always

be switched off.

The power key should be switched off during all work on the mower’s

underframe, such as cleaning or replacing the blades.

General & Additional Safety Instruction

a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition.

b) Inspect the robotic lawnmower each week and replace worn or damaged parts for safety.

c) Check especially that the blades and blade disc are not damaged. Replace all blades and

screws at the same time if necessary so that the rotating parts are balanced.

d) Ensure that only replacement cutting means of the right type are used.

e) Ensure that batteries are charged using the correct charger recommended by the

manufacturer. Incorrect use may result in electric shock, overheating or leakage of corrosive

liquid from the battery.

f) In the event of leakage of electrolyte ﬂush with water/neutralizing agent, seek medical help if it

comes into contact with the eyes etc.

g) Servicing of the appliance should be according to manufacturers’ instructions.

h) In order to obtain the best performance, please pay attention to the following ambient

temperature range, do not charge, use, or store in the case of exceeding the following

temperature range:

a) Charging temperature range: 39°F~113°F (4°C~45°C)

b) Discharge temperature range: -4°F~131°F (-20°C~55°C)

c) Storage temperature range: -4°F~167°F (-20°C~75°C)

i) Leaking battery ﬂuid can cause skin and eye irritation or chemical burns.

a) Avoid contact with skin and eyes.

b) If liquid gets in eyes: Do not rub. Flush open eyes with water for at least 15 minutes, and

seek medical advice.

c) In case of accidental contact, wash the contact area immediately and thoroughly with mild

soap and water.

d) Use an inert absorbent such as sand on spilled liquid.

Recommendation

To connect the machine and/or its peripherals only to a supply circuit protected by a residual

current device (RCD) with a tripping current of not more than 30 mA.

Residual risks

To avoid injuries, wear protective gloves when replacing the blades.

Transport

The original packaging should be used when transporting robotic lawnmower over long distances.

To safely move form or within the working area:

a) Press the STOP button to stop the mower.

You select the four digit PIN code when you start the mower for the ﬁrst time.

b) Always switch off robotic lawnmower if you intend to carry the mower.

c) Carry the mower by the handle at the front under the mower. Carry the mower with the blade

disc away from the body.

Safety Warnings for battery pack

a) Do not dismantle, open or shred cells or battery pack.

b) Do not expose battery pack to heat or ﬁre. Avoid storage in direct sunlight.

c) Do not short-circuit a battery pack. Do not store battery packs haphazardly in

a box or drawer where they may short-circuit each other or be short-circuited

by other metal objects. When battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make

a connection from one terminal to another. Shorting the battery terminals together may cause

burns or ﬁre.

d) Do not subject battery pack to mechanical shock.

General & Additional Safety Instruction

e) In the event of battery leaking, do not allow the liquid to come in contact

with the skin or eyes. If contact has been made, wash the affected area with

copious amounts of water and seek medical advice.

f) Do not use any battery pack which is not designed for use with the

equipment.

g) Keep battery pack out of the reach of children.

h) Always purchase the battery pack recommended by the device manufacturer

for the equipment.

i) Keep battery pack clean and dry.

j) Wipe the battery pack terminals with a clean dry cloth if they become dirty.

k) Battery pack needs to be charged before use. Always use the correct charger

and refer to the manufacturer’s instructions or equipment manual for proper

charging instructions.

l) Do not leave battery pack on prolonged charge when not in use.

m)After extended periods of storage, it may be necessary to charge and

discharge the battery pack several times to obtain maximum performance.

n) Recharge only with the charger speciﬁed by Worx. Do not use any charger

other than that speciﬁcally provided for use with the equipment.

o) Retain the original product literature for future reference.

p) Use only the battery pack in the application for which it was intended.

q) Remove the battery pack from the equipment when not in use.

r) Dispose of properly.

s) Do not mix cells of different manufacture, capacity, size or type within a

device.

t) Keep the battery away from microwaves and high pressure.

User manual requirements for wireless product

a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

b) Caution: Changes or modiﬁcations to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

c) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to

the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

d) NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

General & Additional Safety Instruction

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

For mobile device

a) To satisfy FCC &IC RF exposure requirements, a separation distance of 20 cm or more should

be maintained between the antenna of this device and persons during device operation

b) To ensure compliance, operations at closer than this distance is not recommended

Region Selection (for Wi-Fi 2.4G device)

Limited by local law regulations, version for North America does not have region selection option.

Band application caution (for Wi Fi 5G device)

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems;

(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the

bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with

the e.i.r.p. limit;

(iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in

the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as

appropriate;

(iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to

remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be

clearly indicated.

Users should also be advised that high-power radars are allocated as primary users (i.e. priority

users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause

interference and/or damage to LE-LAN devices.

General & Additional Safety Instruction

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Worx Rasenmäher Handbücher

Worx

Worx Landroid M Bedienungsanleitung

Worx

Worx Landroid WR139E Bedienungsanleitung

Worx

Worx WG784E Bedienungsanleitung

Worx

Worx WG779E Bedienungsanleitung

Worx

Worx Landroid Bedienungsanleitung

Worx

Worx Landroid M 500 Technisches Datenblatt

Worx

Worx WG753 Bedienungsanleitung

Worx

Worx Landroid S 300 Technisches Datenblatt

Worx

Worx Landroid L 1000 Bedienungsanleitung

Worx

Worx Landroid Bedienungsanleitung

Worx

Worx Nitro WG751 3 Series Bedienungsanleitung

Worx

Worx Landroid S 300 Technisches Datenblatt

Worx

Worx WG782 Bedienungsanleitung

Worx

Worx Landroid WR143 Technisches Datenblatt

Worx

Worx Landroid M Bedienungsanleitung

Worx

Worx Landroid WR141E Bedienungsanleitung

Worx

Worx Landroid M WG794E Betriebsanleitung

Worx

Worx Landroid WR140E Bedienungsanleitung

Worx

Worx LANDROID WG791 Bedienungsanleitung

Worx

Worx WG750 9 Series Bedienungsanleitung

Worx

Worx Landroid M Bedienungsanleitung

Worx

Worx WG708E Bedienungsanleitung

Worx

Worx WG751E Bedienungsanleitung

Worx

Worx WG743E Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung