Worx WG722E Bedienungsanleitung

SAFETY AND OPERATING MANUAL

ORIGINAL INSTRUCTIONS

Electric Lawn Mower WG722E

Front Part Back Part

B1 B2

B3 B4

C1 C2

C3 D

GH1

A1 A2

Front Part Back Part

B1 B2

B3 B4

C1 C2

C3 D

GH1

A1 A2

Front Part Back Part

B1 B2

B3 B4

C1 C2

C3 D

GH1

A1 A2

Front Part Back Part

B1 B2

B3 B4

C1 C2

C3 D

GH1

A1 A2

Electric Lawn Mower WG722E

1. SAFETY BUTTON

2. CABLE CLIP

3. HANDLE KNOBS

4. GRASS BAG FILLING INDICATOR

5. GRASS COLLECTION BAG

6. SWITCH LEVER

7. UPPER HANDLE

8. LOWER HANDLE

9. SAFETY FLAP

10. CARRY HANDLE

11. MOTOR COVER

12. BLADE BOLT (SEE FIG H1)

13. BLADE (SEE FIG H1)

Not all the accessories illustrated or

described are included in standard delivery.

TECHNICAL DATA

Type WG722E (705-739-designation of machinery,

representative of Electric rotary mower)

Rated Voltage 230-240V~50Hz

Rated Power 1400W

cutting capacity 330mm

No load speed 3700/min

Cutting height 20-60mm

Cutting height positions 5 positions

Grass collection capacity 30L

Protection Class /II

Machine Weight 9.7kg

NOISE DATA

A weighted sound pressure LpA: 79.8dB(A)

KpA: 3.0dB(A)

A weighted sound power LwA: 93.8dB(A)

Wear ear protection

VIBRATION INFORMATION

Typical weighted

vibration

ah< 2.5 m/s2,

Uncertainty K=1.5m/s2

WARNING: The vibration emission value

during actual use of the power tool can differ

from the declared value depending on the ways in

which the tool is used dependant on the following

examples and other variations on how the tool is

used:

How the tool is used and the materials being cut or

drilled.

The tool being in good condition and well

maintained

Using the correct accessory for the tool and

ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any

anti vibration accessories are used.

And the tool is being used as intended by its design

and these instructions.

This tool may cause hand-arm vibration

syndrome if its use is not adequately

managed.

WARNING: To be accurate, an estimation

of exposure level in the actual conditions of

use should also take account of all parts of the

operating cycle such as the times when the tool

is switched off and when it is running idle but not

actually doing the job.This may signiﬁcantly reduce

the exposure level over the total working period.

Helping to minimise your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades

Maintain this tool in accordance with these

instructions and keep well lubricated (where

appropriate)

If the tool is to be used regularly then invest in anti

vibration accessories.

Plan your work schedule to spread any high

vibration tool use across a number of days.

ACCESSORIES

Grass collection bag 1

Handle knobs 2

Cable clips 2

Spanner 1

We recommend that you purchase your accessories

from the same store that sold you the tool. Refer to

the accessory packaging for further details. Store

personnel can assist you and offer advice.

Electric Lawn Mower WG722E

PRODUCT SAFETY

GENERAL SAFETY

WARNINGS

WARNING: Read all

safety warnings and all

instructions. Failure to follow

the warnings and instructions

may result in electric shock,

ﬁre and/or serious injury.

Save all warnings and

instructions for future

reference.

- This appliance is not

intended for use by persons

(including children) with

reduced physical, sensory

or mental capabilities,

or lack of experience

and knowledge, unless

they have been given

supervision or instruction

concerning use of the

appliance by a person

responsible for their safety.

- Children should be

supervised to ensure that

they do not play with the

appliance.

If the supply cord is damaged,

it must be replaced by the

manufacturer, its service agent

or similarly qualiﬁed persons

in order to avoid a hazard.

IMPORTANT

READ CAREFULLY BEFORE

USE.

KEEP FOR FUTURE

REFERENCE.

Safe operating practices

for electrically powered

lawnmowers

Training

a) Read the instructions

carefully. Be familiar with

the controls and the proper

use of the machine.

b) Never allow children or

people unfamiliar with

these instructions to use

the lawnmower. Local

regulations can restrict the

age of the operator.

c) Never operate the machine

while people, especially

children, or pets are nearby.

d) Keep in mind that the

operator or user is

responsible for accidents or

hazards occurring to other

people or their property.

Preparation

a) While operate the machine,

always wear substantial

footwear and long trousers.

Do not operate the

equipment when barefoot

or wearing open sandals.

Avoid wearing clothing that

is loose ﬁtting or that has

hanging cords or ties.

Electric Lawn Mower WG722E

b) Thoroughly inspect the area

where the equipment is

to be used and remove all

objects which can be thrown

by the machine.

c) Before using, always

visually inspect to see that

the blade, blade bolt and

the blade assembly are not

worn or damaged. Replace

worn or damaged blades

and bolts in sets to preserve

balance. Replace damaged

and unreadable labels.

d) Before use check the

supply and extension cord

for signs of damage or

aging. If the cord becomes

damaged during the use,

disconnect the cord from

the supply immediately.

DO NOTTOUCHTHE CORD

BEFORE DISCONNECTING

THE SUPPLY. Do not use

the machine if the cord is

damaged or worn.

Operation

a) Operate the machine only in

daylight or in good artiﬁcial

light.

b) Avoid operating the

machine in wet grass.

c) Always be sure of your

footing on slopes.

d) Walk, never run.

e) Mow across the face of

slopes, never up and down.

f) Exercise extreme caution

when changing direction on

slopes.

g) Do not mow excessively

steep slopes.

h) Use extreme caution when

reversing or pulling the

lawnmower towards you.

i) Stop the blade(s) if the

lawnmower has to be tilted

for transportation when

crossing surfaces other

than grass, and when

transporting the lawnmower

to and from the area to be

mowed.

j) Never operate the

lawnmower with defective

guards, or without safety

devices, for example

deﬂectors and/or grass

catchers, in place.

k) Switch on the motor

carefully according to

instructions and with feet

well away from the blade(s).

l) Do not tilt the lawnmower

when switching on the

motor, except if the

lawnmower has to be tilted

for starting. In this case,

do not tilt it more than

absolutely necessary and lift

only the part which is away

from the operator.

m)Do not start the machine

when standing in front of

the discharge.

n) Do not put hands or feet

near or under rotating parts.

Electric Lawn Mower WG722E

Keep clear of the discharge

opening at all times.

o) Do not transport the

lawnmower while the

power source is running.

p) Stop the machine and

disconnect the plug from

the mains. Make sure that

all moving parts have come

to complete stop.

- whenever you leave the

machine;

- before clearing blockages or

unclogging chute;

- before checking, cleaning or

working on the lawnmower;

- after striking a foreign

object. Inspect the

lawnmower for damage

and make repairs before

restarting and operating the

lawnmower.

if the lawnmower starts to

vibrate abnormally (check

immediately)

- inspect for damage;

- replace or repair any

damaged parts;

- check for and tighten any

loose parts.

Maintenance and storage

a) Keep all nuts, bolts and

screws tight to be sure the

machine is in safe working

condition;

b) Check the grass catcher

frequently for wear or

deterioration;

c) Replace worn or damaged

parts for safety. Use only

genuine replacement parts

and accessories.

d) Be careful during

adjustment of the machine

to prevent entrapment of

the ﬁngers between moving

blades and ﬁxed parts of the

machine.

e) On machines with multi

blade, take care as rotating

one blade can cause other

blades to rotate.

f) Always allow the machine

to cool down before storing.

g) When servicing the blades

be aware that, even though

the power source is

switched off, the blades can

still be moved.

Recommendation

To connect the machine only

to a supply circuit protected by

a residual current device (RCD)

with a tripping current of not

more than 30mA.

Inhaltsverzeichnis

Andere Worx Rasenmäher Handbücher

Worx

Worx Landroid WR101SI Bedienungsanleitung

Worx

Worx WR165E Bedienungsanleitung

Worx

Worx LANDROID WG792E Bedienungsanleitung

Worx

Worx WG743E.1 Bedienungsanleitung

Worx

Worx WG771 Bedienungsanleitung

Worx

Worx WG705E Installationshandbuch

Worx

Worx Landroid M WG794E Installationshandbuch

Worx

Worx Landroid M WG794E Betriebsanleitung

Worx

Worx WG707E Bedienungsanleitung

Worx

Worx WG712 Bedienungsanleitung

Worx

Worx Landroid WR130E Bedienungsanleitung

Worx

Worx Landroid WG797E Bedienungsanleitung

Worx

Worx WG708E Bedienungsanleitung

Worx

Worx WG724E Installationshandbuch

Worx

Worx WG773E Bedienungsanleitung

Worx

Worx Landroid L 1000 Bedienungsanleitung

Worx

Worx WG772 Bedienungsanleitung

Worx

Worx WG743E Installationshandbuch

Worx

Worx LANDROID WR210 Bedienungsanleitung

Worx

Worx WG789E Bedienungsanleitung

Worx

Worx WP733E Betriebsanleitung

Worx

Worx WG778E Bedienungsanleitung

Worx

Worx WG784E Installationshandbuch

Worx

Worx Landroid WR208 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung