Wyrestorm SW-130-TX Benutzerhandbuch

Application Programming Interface

Product Model

SW-130-TX

Document Revision

V1.0

Document Date

June 2020

SW-130-TX API | 200706

2 of 10

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Contents

Overview .......................................................................................................................................... 3

Wiring and Communication Configuration ........................................................................................3

Command Overview .........................................................................................................................4

Switching Inputs .............................................................................................................................. 5

Controlling Display Power via CEC.................................................................................................... 6

Troubleshooting............................................................................................................................... 8

Contacting Technical Support ..........................................................................................................9

Document Revision History .............................................................................................................. 9

Publication Disclaimer ...................................................................................................................10

SW-130-TX API | 200706

3 of 10

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Overview

The following contains the connection info and commands to control the SW-130-TX In-Wall HDBaseT switcher. By

following the content contained in this document the switcher can be controlled and configured via a 3rd party RS-232

control system.

Before You Begin

Verify that the following items are on hand and that all documentation is reviewed before continuing:

Connected and operational SW-130-TX..................................................................................................................................

Control System and Control System Documentation...........................................................................................................

PC or Mac for Configuring Product...........................................................................................................................................

Wiring and Communication Configuration

WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the

switcher. Before running or terminating the wires, read through this section in its entirety to ensure proper operation and to

avoid damaging equipment.

RS-232 Connection

The following wiring diagram shows the pinout for the WyreStorm device. While not shown, connect the TX (transmit) to RX

(receive) pins at the control system or PC side of the cable. Most control systems and computers are configured for Digital

Terminal Equipment (DTE) where pin 2 is RX and pin 3 is TX. This can vary from device to device, refer to the

documentation for the connected device for pin functionally to ensure that the connect connections can be made.

RS-232 Port Settings

Baud rate:

115200bps

Data Bits:

8bits

Parity:

None

Stop Bits:

1bit

Flow Control:

None

SW-130-TX API | 200706

4 of 10

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Command Overview

Command Delimiter for Sent Commands

When sending commands using the RS-232 API channel, all command lines sent from the 3rd-party controller to the

switcher should end with a specific character. This signifies when the command is processed by the switcher. This is

usually specified in 3rd-party control software as the “command delimiter,” “stop character,” or “line terminator.”

Accepted delimiter characters are:

Character Shorthand Hex Notation Escape Notation Decimal Notation

Line Feed

Carriage Return + Line Feed

CR LF

0D 0A

\r\n

13 10

Note: Most 3rd-party control software will either append these characters automatically or an option to specify

them will be present. It is important that the last delimiter character is LF and not CR.

SW-130-TX API | 200706

5 of 10

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Switching Inputs

Switching Video Inputs

Command structure:

SET SW <INPUT>

<INPUT> = hdmi1 | hdmi2 | usbc

Response Syntax:

SW <INPUT>

Example Command:

SET SW hdmi1

Example Response:

SW hdmi1

Query Active Input

Command structure:

GET SW

Response Syntax:

<INPUT>

Example Command:

GET SW

Example Response:

hdmi1

SW-130-TX API | 200706

6 of 10

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Controlling Display Power via CEC

CEC Display Power

Command structure:

SET CEC_PWR <PRM>

<PRM> = on | off

Response Syntax:

CEC_PWR <PRM>

Example Command:

SET CEC_PWR on

Example Response:

CEC_PWR on

Set CEC Auto Trigger

Command structure:

SET AUTOCEC_M <PRM>

<PRM> = on | off

Response Syntax:

AUTOCEC_M <PRM>

Example Command:

SET AUTOCEC_M on

Example Response:

AUTOCEC_M on

The switcher can automatically send a CEC Power On command through its output when an input signal is detected. CEC

Power Off commands can also automatically be sent after a predetermined amount of time passes and when a signal

detection is lost. See “Set CEC Auto Power Off Delay” section for details.

Query CEC Auto Trigger

Command structure:

GET AUTOCEC_M

Response Syntax:

AUTOCEC_M <PRM>

Example Command:

GET AUTOCEC_M

Example Response:

AUTOCEC_M on

SW-130-TX API | 200706

7 of 10

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Set CEC Auto Power Off Delay

Command structure:

SET AUTOCEC_D <PRM>

<PRM> = 1~30

Response Syntax:

AUTOCEC_D <PRM>

Example Command:

SET AUTOCEC_D 5

Example Response:

AUTOCEC_D 5

Note: <PRM> is in minutes. A value of 5 is equal to a 5-minute delay.

Query CEC Auto Power Off Delay

Command structure:

GET AUTOCEC_D

Response Syntax:

AUTOCEC_D <PRM>

Example Command:

GET AUTOCEC_D

Example Response:

AUTOCEC_D 5

Note: <PRM> is in minutes. A value of 5 is equal to a 5-minute delay.

SW-130-TX API | 200706

8 of 10

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Troubleshooting

Enable Long Reach Mode

Command structure:

SET LR_FN <PRM>

<PRM> = on | off

Response Syntax:

LR_FN <PRM>

Example Command:

SET LR_FN on

Example Response:

LR_FN on

Query Firmware Version

Command:

GET SW_VERSION

<PRM> = current installed firmware version

Response Syntax:

<PRM>

Reboot Switcher

Command:

REBOOT

No Parameters

Response:

REBOOT

Restore Factory Defaults

Command:

RESET

No Parameters

Response:

RESET

SW-130-TX API | 200706

9 of 10

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Contacting Technical Support

Should further clarification of the content in this document or assistance on troubleshooting be required, please contact

WyreStorm technical support.

Phone: UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

Contact Request: http://wyrestorm.com/contact-tech-support

Document Revision History

V1.0 – June 2020

All

Initial release of document

WyreStorm Offices

North America: 23 Wood Road, Round Lake, NY 12151

Tel: +1 518-289-1293

EMEA: Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW, UK

Tel: +44 (0) 1793 230 343

WyreStorm Technologies reserves the right to change the physical appearance or technical specification of this product at

any time. Visit wyrestorm.com for the latest product information.

Publication Disclaimer

The material contained in this document consists of information that is the sole property of WyreStorm. This document is

intended to provide information to allow interfacing to the relevant WyreStorm equipment by third party products.

WYRESTORM IS NOT RESPONSIBLE FOR MALFUNCTIONS AND/OR THE IN-OPERABILITY WHICH MAY BE CAUSED BY

THE APPLICATION OF THIS INFORMATION, WHETHER EXPECTED OR NOT.

WyreStorm reserves the right to change software, control codes and specifications without notice.

WyreStorm will not be liable for any use of this information or any changes it may make to those products. The use of this

information constitutes an agreement by the user to these limitations and exclusions.

Inhaltsverzeichnis

Andere Wyrestorm Schalten Handbücher

Wyrestorm

Wyrestorm SW-1001-HDBT Bedienungsanleitung

Wyrestorm

Wyrestorm SW-0501-HDBT Bedienungsanleitung

Wyrestorm

Wyrestorm EXP-SW0501-010 Bedienungsanleitung

Wyrestorm

Wyrestorm SW-0401 Bedienungsanleitung

Wyrestorm

Wyrestorm Essentials EXP-SW-0401-H2 Bedienungsanleitung

Wyrestorm

Wyrestorm MX-0808-PP-AUD Bedienungsanleitung

Wyrestorm

Wyrestorm SW-540-TX-W Bedienungsanleitung

Wyrestorm

Wyrestorm SW-0201-POH Bedienungsanleitung

Wyrestorm

Wyrestorm NHD-000-CTL Bedienungsanleitung

Wyrestorm

Wyrestorm MX0404-HDC Bedienungsanleitung

Wyrestorm

Wyrestorm SW-0401-HDBT Bedienungsanleitung

Wyrestorm

Wyrestorm SW-740-TX Bedienungsanleitung

Wyrestorm

Wyrestorm SW-220-TX-W Bedienungsanleitung

Wyrestorm

Wyrestorm MX-0404-PP-KIT Bedienungsanleitung

Wyrestorm

Wyrestorm EXP-MX0402-010 Bedienungsanleitung

Wyrestorm

Wyrestorm EXP-SW-0501 Bedienungsanleitung

Wyrestorm

Wyrestorm NHD-SW-0501 Bedienungsanleitung

Wyrestorm

Wyrestorm EXP-MX0402-010 Bedienungsanleitung

Wyrestorm

Wyrestorm NHD-400-RX Bedienungsanleitung

Wyrestorm

Wyrestorm APO-DG1 Bedienungsanleitung

Wyrestorm

Wyrestorm SW-0201-4K Bedienungsanleitung

Wyrestorm

Wyrestorm EXP-SW-0301 Bedienungsanleitung

Wyrestorm

Wyrestorm NHD-SW-0501 Bedienungsanleitung

Wyrestorm

Wyrestorm SW-0501-HDBT Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung