Xact S5 Bedienungsanleitung

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

S5-Bluetooth

Bluetooth Standalone Access Control

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

User Manual

Introduction

The S5-Bluetooth is a metal case anti-vandal standalone access control that can be mounted

both indoor and outdoor. The unique feature is can be operated by mobile phone through

Bluetooth or 13.56MHz Mifare Card. The operation is very smart and convenient.

Features:

Vandal resistance enclosure

Waterproof, conform to IP66

One programming relay output

1000 users（including Mifare card and mobile phone user）

Two ways to open the door: Mifare card; Mobile phone.

Can open door by App for android phone(App for IOS will com soon).

Support sending Remote E-key to others: the Administrator can control access time.

Latch mode to hold door or gate open

Multi-color LED status display

Specification：

User Capacity

Card

Mobile

1000

13.56MHz Mifare Card

Android 4.3 above

Operating Voltage

Idle current

Active current

12V DC

≤35mA

≤90mA

Proximity Card Reader

Radio Technology

Card Read range

Mifare Card

13.56MHz

2～6cm

Bluetooth

Range

Reaction

Bluetooth Version:4.0 Above

＜20m（relate to environment）

＜2seconds

Relay

One(NO, NC,Common)

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

Lock Output Load

2 Amp Maximum

Environment

Operating Temperature

Operating Humidity

Meets IP66

-20C～+60C

0%～98%

Physical

Dimension

Net Weight

Shipment Weight

Zinc-Alloy Enclosure

L103 X W48 X H19 (mm)

260g

300g

Carton Inventory

S5 Bluetooth

Self Tapping Screws Wall Anchors

Screw Driver Diode 1N4004 (For relay circuit protection)

Installation

Drill 2 holes(A,C) on the wall for the screws and one hole for the cable, Thread the cable

through the cable hole(B)

Knock the rubber bungs to the screw holes(A,C),Fix the back cover firmly on the wall

with 4 flat head screws

Attach the unit to the back cover.

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

Wiring

No.

Color

Function

Notes

Green

Normally Closed Relay Output

Brown

COM

Common Connection for Relay Output

White

Normally Open Relay output

Black

GND

Negative Pole

Red

+12V

Regulated Power Input

Yellow

OPEN

Request to Exit input(REX)

Connection Diagram:

Common Power Supply:

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

Access Control Power Supply:

APP Operation

(Make sure your Android Device connects to network, and Bluetooth is turn on )

1. Register:

You Will Get An Email From DoorMaster

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

Pic 04

Then Register Successfully.

2. Add Device & Set Master USers

Below step is just for Masters, each deivce have only 1 super Master User and 10 Master Users (The

1st user added the device is Super Master User, the 2nd~11th users added the device is Master Users.)

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

Slowly press exit button for three times, when Red light shines, operate like below: (If the

Red light didn’t shine, it means the Super Master has been added. Need to Erase All Users

firstly-Referto P.14)

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

When hear one “Beep”, means add device successfully.

(Notice: Super Master and Master should add device at one time, if Masters didn’t be added in

this step, ask Super Master to send the E-Key and set as Master-Refer to P.11)

3. Add Common Users

Below is Authority for Different Users

Authority

Super Master

User

Master Users

Common Users

Open Door

√

Change Device Name

√

Add Card

√

Delete Card

√

Send E-Key

√

Set Relay

Configuration

√

Set Common Users

as Master User

√

Important Notice

Press the Right Arrow Key > next to device name to enter configure setting menu (except

change password).

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the

official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.

4. Add and Delete Card Users by App

Add Card Users

．

act

．．．

．

onfidentiality Statement

．．．．．．．．．．．．．．．．．．．．．．．

- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this

message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any

dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the