Xantrex XC Series Bedienungsanleitung

The Easy Shunt™ (Part #: 808-8020-00) is an option that you can purchase for use with

your XC Series or BC Series battery charger. It is installed on Bank 1 and acts as a

temperature sensor during normal operation, providing improved battery voltage charge

control. It also provides an Amp-Hour usage indicator (a "fuel gauge" for your main

battery bank) via your XC Series or BC Series charger when the charger is off.

Precautions When Working With Batteries

1. Follow all instructions published by the battery manufacturer and the manufacturer

of the equipment in which the battery is installed.

2. Make sure the area around the battery is well ventilated.

3. Never smoke or allow a spark or flame near the engine or batteries.

4. Use caution to reduce the risk of dropping a metal tool on the battery. It could spark

or short circuit the battery or other electrical parts and could cause an explosion.

5. Remove all metal items, like rings, bracelets, and watches when working with lead-

acid batteries. Lead-acid batteries produce a short circuit current high enough to

weld metal, causing a severe skin burn.

6. Have someone within range of your voice or close enough to come to your aid

when you work near a lead-acid battery.

7. Have plenty of fresh water and soap nearby in case battery acid contacts skin,

clothing, or eyes.

8. Wear complete eye protection and clothing protection. Avoid touching your eyes

while working near batteries.

9. If battery acid contacts skin or clothing, wash immediately with soap and water. If

acid enters your eye, immediately flood it with running cold water for at least

twenty minutes and get medical attention immediately.

10. If you need to remove a battery, always remove the negative (ground) terminal from

the battery first. Make sure all accessories are off so you don’t cause a spark.

Easy Shunt™ Installation

Instructions

For Xantrex XC Series

and BC Series Battery

Chargers

975-0191-01-01

Revision C

WARNING: Explosion or fire hazard

Xantrex XC Series and BC Series Battery Charger

2975-0191-01-01

Installing the Easy Shunt™ Sensor

To install the Easy Shunt™:

1. Switch off all devices operating from the battery. Disconnect all the wires from the

negative terminal of the battery (which is connected to Bank 1 on the XC or BC

Series charger).

2. Connect the "battery end" of the shunt which has the "D" shaped cutout to the

negative battery stud. If you have a round-post style battery use the round post to

stud battery terminal adapter provided. If you have a battery with a threaded stud,

remove the post adapter.

3. Loosen the nut from the bolt located in the opposite "load side" shunt terminal.

Adjust the round-headed (carriage) bolt until it contacts the top of the battery case

to provide support against the weight of the heavy wiring and any vibration that

may be transmitted to it.

Battery Positive Ring

Connector

Battery Negative

Cable Connection

(battery terminal)

XC Series or BC Series

Negative Cable Connection

(load terminal)

Telephone-style Connector

(to Bank 1 Connector on

Rear Panel of XC Series or

BC Series)

Battery Negative

Terminal

Round Post to Stud

Battery Terminal

Adapter

Easy Shunt™

Easy Shunt™ Installation Instructions

975-0191-01-01 3

4. Attach all wires removed in step 1 back onto this new "load" shunt terminal.

5. Tighten the nuts to 8 – 9 Nm (6 – 7 ft-lbs) to secure these electrical connections.

6. Route the sensor cable to the charger and plug it into the Bank 1 connector on the

rear panel of the XC Series or BC Series Charger.

7. Connect the battery positive ring connector to the positive terminal of the battery, or

to another round post to stud battery terminal adapter if needed.

Using the Easy Shunt™ Sensor

In order to use the Easy Shunt™, AC power must be disconnected from the XC Series

or BC Series Charger. In addition, the Amp-Hours will only reset to zero and give an

accurate usage gauge if bank 1 has reached float (3 stage charging) or rest (2 stage

charging).

To display the Amp-Hours that have been used since Bank 1 was last fully

charged:

1. Ensure the charger is off and AC power has been disabled.

2. Press ON/STANDBY.

The remote display will scroll the following information, in order, for bank 1.

• Highest priority charger fault or warning (if present)

• Highest priority battery fault or warning (if present)

• Battery voltage

• Amp-hours used (the Ah units indicator light on the remote display will

illuminate)

Round-headed

carriage bolt

Xantrex XC Series and BC Series Battery Charger

4975-0191-01-01

3. The remote display will scroll the following information, in order, on Bank 2 and

then Bank 3:

• Highest priority charger fault or warning (if present)

• Highest priority battery fault or warning (if present)

• Battery voltage

Amp-hours used is not available for Bank 2 or Bank 3.

4. After running through the sequence once, the display will switch itself off. Press the

ON/STANDBY switch to show the sequence again at any time until AC is enabled.

Notice of Copyright

Warranty

This product has a 24 month limited warranty from the date of first sale which covers defects in workmanship and materials.

Retain proof of purchase. For full details on this limited warranty visit our website at www.xantrex.com or call

1-800-670-0707.

It is important that you read the limited warranty as it restricts your legal rights. If you are not satisfied with the limited

warranty you may return this product to Xantrex with 30 days of the date of purchase for a full refund.

Date and Revision

August 2005 Revision C

Part Number

975-0191-01-01

Contact Information

Phone: 1 800 670 0707 (toll free North America)

+34 93 470 5330 (Europe)

1 360 925 5097 (direct and rest of world)

Fax: 1-800 994 7828 (toll free North America)

+34 93 473 6093 (Europe)

1 360 925 5143 (direct and rest of world)

Email: customerservice@xantrex.com (North America and rest of world)

support.europe@xantrex.com (Europe)

Web: www.xantrex.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xantrex Akkuladegerät Handbücher

Xantrex

Xantrex FREEDOM HF 1000 Bedienungsanleitung

Xantrex

Xantrex Digital echo-charge Bedienungsanleitung

Xantrex

Xantrex XPLORE 120A 12V Bedienungsanleitung

Xantrex

Xantrex Freedom EX 4000 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC10TB Bedienungsanleitung

Xantrex

Xantrex Freedom XC 1800 Bedienungsanleitung

Xantrex

Xantrex Freedom 458 Series Bedienungsanleitung

Xantrex

Xantrex Freedom XC 1000 Bedienungsanleitung

Xantrex

Xantrex TrueCharge 2 Bedienungsanleitung

Xantrex

Xantrex Truecharge2 804-1220-02 Bedienungsanleitung

Xantrex

Xantrex Truecharge 20+ Amp Bedienungsanleitung

Xantrex

Xantrex Truecharge 40i Kurzanleitung

Xantrex

Xantrex Truecharge TC10 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC1012 Bedienungsanleitung

Xantrex

Xantrex XPower Charger 2 Bedienungsanleitung

Xantrex

Xantrex XPLORE 120/12 Bedienungsanleitung

Xantrex

Xantrex 806-1054 Bedienungsanleitung

Xantrex

Xantrex Freedom SW 230V 815-3524-02 Bedienungsanleitung

Xantrex

Xantrex Trace DR Series Administratorhandbuch

Xantrex

Xantrex Freedom Marine Series Bedienungsanleitung

Xantrex

Xantrex XC1524 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC1012 Bedienungsanleitung

Xantrex

Xantrex Truecharge TC20+ Bedienungsanleitung

Xantrex

Xantrex Truecharge TC1012 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung