Xantrex Freedom SW 815-2024 Bedienungsanleitung

Freedom SW

Sine Wave Inverter/Chargers

Owner’s Guide

FREEDOM SW 3012

CLEARFAULT

RESET

INVERTER

ENABLE

INVERTER

ENABLED ACIN FAULT

GEN

SUPPORT

CHARGING WARNING

CLEARFAULT

RESET

INVERTER

ENABLE

INVERTER

ENABLED ACIN FAULT

GEN

SUPPORT

CHARGING WARNING

Freedom SW 3012 shown.

Model Numbers

815-3012, 815-3024

815-2012, 815-2024

™

Freedom SW 3K2K InvChg Owners Guide.book Page i Wednesday, October 9, 2013 1:34 PM

Freedom SW 3K2K InvChg Owners Guide.book Page ii Wednesday, October 9, 2013 1:34 PM

97-0019-01-01 i

owned by Schneider Electric Industries SAS or its affiliated companies.

Exclusion for Documentation

UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER

(A)MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY

TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION;

(B)ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES,

WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE

OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY

AT THE USER’SRISK; AND

(C)REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH,

ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE

ACCURACY CANNOT BE GUARANTEED. APPROVED CONTENT IS CONTAINED WITH THE ENGLISH

LANGUAGE VERSION WHICH IS POSTED AT WWW.XANTREX.COM.

Document Part Number

97-0019-01-01

Date and Revision

September 2013 Rev D

Product Numbers

815-2012 (Freedom SW 2012), 815-2024 (Freedom SW 2024)

815-3012 (Freedom SW 3012), 815-3024 (Freedom SW 3024)

Contact Information

Information About Your System

As soon as you open your product, record the following information and be sure to

keep your proof of purchase.

To view, download, or print the latest revision, visit the website shown under Contact

Information.

Telephone: 1 800 670 0707 (toll free North America)

1 408 987 6030 (direct)

Web: www.xantrex.com

Serial Number _________________________________

Product Number _________________________________

Purchased From _________________________________

Purchase Date _________________________________

Freedom SW 3K2K InvChg Owners Guide.book Page i Wednesday, October 9, 2013 1:34 PM

ii Freedom SW Owner’s Guide

About This Guide

Purpose

The purpose of this Owner’s Guide is to provide explanations and

procedures for operating, troubleshooting, and maintaining the Freedom

SW Inverter/Charger.

Scope

The Guide provides safety and operating guidelines as well as information

on configuring the inverter/charger. It also provides information about

troubleshooting the unit. It does not provide details about particular brands

of batteries. You need to consult individual battery manufacturers for this

information.

Audience

The Guide is intended for users and operators of the Freedom SW Inverter/

Charger.

Conventions Used

The following conventions are used in this guide.

STATEMENT OF HAZARD

Contains statements of avoidance or strict compliance.

Failure to follow these instructions will result in death or serious

injury.

STATEMENT OF HAZARD

Contains statements of avoidance or strict compliance.

Failure to follow these instructions can result in death or serious

injury.

STATEMENT OF HAZARD

Contains statements of avoidance or strict compliance.

Failure to follow these instructions can result in minor or moderate

injury.

STATEMENT OF HAZARD

Contains statements of avoidance or strict compliance.

Failure to follow these instructions can damage the unit and/or

damage other equipment.

IMPORTANT:

These notes describe things which are important for you to

know, however, they are not as serious as a caution or warning.

Freedom SW 3K2K InvChg Owners Guide.book Page ii Wednesday, October 9, 2013 1:34 PM

97-0019-01-01 iii

Related Information

You can find more information about Xantrex-branded products and

services at www.xantrex.com.

NOTE: The Installation Guide (Document Part Number: 97-0020-01-01) is

primarily intended for qualified installers who need to install and configure

the Freedom SW Inverter/Charger. The installer should have knowledge

and experience in installing electrical equipment, knowledge of the

applicable installation codes, and awareness of the hazards involved in

performing electrical work and how to reduce those hazards. A qualified

technician or electrician has this knowledge and experience.

Freedom SW 3K2K InvChg Owners Guide.book Page iii Wednesday, October 9, 2013 1:34 PM

iv Freedom SW Owner’s Guide

Important Safety Instructions

IMPORTANT: READ AND SAVE THIS OWNER’SGUIDE FOR FUTURE

REFERENCE.

This chapter contains important safety and installation instructions for the

Freedom SW Inverter/Charger (Freedom SW). Each time, before using the

Freedom SW, READ ALL instructions and cautionary markings on or

provided with the inverter/charger, the batteries, and all appropriate sections

of this guide.

NOTE: The Freedom SW contains no user-serviceable parts.

NOTE: Turning off the inverter/charger using the on/off switch on the front

panel will not reduce an electrical shock hazard.

ELECTRICAL SHOCK HAZARD

• Do not expose the Freedom SW to rain, snow, spray, or bilge water.

This inverter/charger is designed for marine applications only when

additional drip protection is installed in certain orientations. See the

installation guide for information.

• Do not operate the inverter/charger if it has received a sharp blow,

been dropped, has cracks or openings in the enclosure including if the

fuse cover has been lost, damaged, or will not close, or otherwise

damaged in any other way.

• Do not disassemble the inverter/charger. Internal capacitors remain

charged after all power is disconnected.

• Disconnect both AC and DC power from the inverter/charger before

attempting any maintenance or cleaning or working on any circuits

connected to the inverter/charger. See note below.

• Do not operate the inverter/charger with damaged or substandard

wiring. Make sure that all wiring is in good condition and is not

undersized.

Failure to follow these instructions will result in death or serious

injury.

Freedom SW 3K2K InvChg Owners Guide.book Page iv Wednesday, October 9, 2013 1:34 PM

97-0019-01-01 v

NOTES:

1. Follow these instructions and those published by the battery

manufacturer and the manufacturer of any equipment you intend to use

in the vicinity of the battery. Review cautionary markings on these

products and on the engine.

2. This inverter/charger contains components which tend to produce arcs

or sparks.

3. Locations include any space containing gasoline-powered machinery,

fuel tanks, as well as joints, fittings, or other connections between

components of the fuel system.

FIRE AND BURN HAZARD

• Do not cover or obstruct the air intake vent openings and/or install in

a zero-clearance compartment.

• Do not use transformerless battery chargers in conjunction with the

inverter/charger due to overheating.

Failure to follow these instructions will result in death or serious

injury.

EXPLOSION HAZARD

• Charge only properly rated (such as 12 V) lead-acid (GEL, AGM,

Flooded, or lead-calcium) rechargeable batteries because other

battery types may explode.

• Do not work in the vicinity of lead-acid batteries. Batteries generate

explosive gases during normal operation. See note #1.

• Do not install and/or operate in compartments containing flammable

materials or in locations that require ignition-protected equipment.

See notes #2 and #3.

Failure to follow these instructions will result in death or serious

injury.

Freedom SW 3K2K InvChg Owners Guide.book Page v Wednesday, October 9, 2013 1:34 PM

vi Freedom SW Owner’s Guide

Precautions When Working With Batteries

NOTES:

1. Mount and place the Freedom SW Inverter/Charger unit away from

batteries in a well ventilated compartment.

2. Always have someone within range of your voice or close enough to

come to your aid when you work near a lead-acid battery.

3. Always have plenty of fresh water and soap nearby in case battery acid

contacts skin, clothing, or eyes.

4. If battery acid contacts skin or clothing, wash immediately with soap

and water. If acid enters your eye, immediately flood it with running

cold water for at least twenty minutes and get medical attention

immediately.

5. Use extra caution to reduce the risk or dropping a metal tool on the

battery. It could spark or short circuit the battery or other electrical

parts and could cause an explosion.

6. Batteries can produce a short circuit current high enough to weld a ring

or metal bracelet or the like to the battery terminal, causing a severe

burn.

7. When removing a battery, always remove the negative terminal from

the battery first for systems with grounded negative. If it is grounded

positive, remove the positive terminal first. Make sure all loads

connected to the battery and all accessories are off so you don’t cause

an arc.

BURN FROM HIGH SHORT-CIRCUIT CURRENT, FIRE AND EXPLO-

SION FROM VENTED GASES HAZARDS

• Always wear proper, non-absorbent gloves, complete eye protection,

and clothing protection. Avoid touching your eyes and wiping your

forehead while working near batteries. See note #4.

• Remove all personal metal items, like rings, bracelets, and watches

when working with batteries. See notes #5 and #6 below.

• Never smoke or allow a spark or flame near the engine or batteries.

• Never charge a frozen battery.

Failure to follow these instructions can result in death or serious

injury.

Freedom SW 3K2K InvChg Owners Guide.book Page vi Wednesday, October 9, 2013 1:34 PM

97-0019-01-01 vii

Precautions When Preparing to Charge

NOTES:

• Study and follow all of the battery manufacturer's specific precautions,

such as removing or not removing cell caps while charging, whether

equalization is acceptable for your battery, and recommended rates of

charge.

• For flooded non-sealed batteries, add distilled water in each cell until

battery acid reaches the level specified by the battery manufacturer.

This helps to purge excessive gas from cells. Do not overfill. For a

battery without removable cell caps, carefully follow manufacturer's

instructions.

Regulatory

The Freedom SW Inverter/Charger is certified to appropriate US and

Canadian standards. For more information see “Regulatory Approvals” on

page 80.

The Freedom SW Inverter/Charger is intended to be used for mobile or

commercial applications. This inverter/charger is designed for marine

applications only when additional drip protection is installed in certain

orientations. See the installation guide for information.

It is not intended for other applications as it may not comply with the

additional safety code requirements needed for those other applications. See

“Limitations On Use” below.

EXPOSURE TO CHEMICALS AND GASES HAZARD

• Make sure the area around the battery is well ventilated.

• Make sure the voltage of the batteries matches the output voltage of

the inverter/charger.

• Be careful to keep corrosion from coming into contact with your eyes

and skin when cleaning battery terminals.

Failure to follow these instructions can result in death or serious

injury.

LIMITATIONS ON USE

• Do not use in connection with life support systems or other medical

equipment or devices.

• Do not use in ambulances or other life-saving emergency vehicles.

Failure to follow these instructions can result in death or serious

injury.

Freedom SW 3K2K InvChg Owners Guide.book Page vii Wednesday, October 9, 2013 1:34 PM

viii Freedom SW Owner’s Guide

FCC Information to the User

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Freedom SW 3K2K InvChg Owners Guide.book Page viii Wednesday, October 9, 2013 1:34 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xantrex Wechselrichter Handbücher

Xantrex

Xantrex Freedom Xi 1000 Bedienungsanleitung

Xantrex

Xantrex PV-100208 Bedienungsanleitung

Xantrex

Xantrex RS2000 Bedienungsanleitung

Xantrex

Xantrex XPower PowerSource Mobile 100 Bedienungsanleitung

Xantrex

Xantrex XPower 1500 Bedienungsanleitung

Xantrex

Xantrex PowerHub PH1800 Handbuch

Xantrex

Xantrex Xantrex PRO XM 1000 Bedienungsanleitung

Xantrex

Xantrex XW4024-120/240-60, XW4548-120/240-60,... Bedienungsanleitung

Xantrex

Xantrex PROWATT SW SW 1000 Bedienungsanleitung

Xantrex

Xantrex PROsine 2.0 Bedienungsanleitung

Xantrex

Xantrex RM1012 Bedienungsanleitung

Xantrex

Xantrex PROwatt SW 2000i Bedienungsanleitung

Xantrex

Xantrex RS3000 Bedienungsanleitung

Xantrex

Xantrex PV-225208 Bedienungsanleitung

Xantrex

Xantrex 784-9115-01 Bedienungsanleitung

Xantrex

Xantrex FREEDOM HF 1000 Bedienungsanleitung

Xantrex

Xantrex GT5.0-NA-240 Bedienungsanleitung

Xantrex

Xantrex PROwatt 3000 Bedienungsanleitung

Xantrex

Xantrex IP1012 AL Bedienungsanleitung

Xantrex

Xantrex XPower 500 Bedienungsanleitung

Xantrex

Xantrex XS400 Bedienungsanleitung

Xantrex

Xantrex Xanbus System Bedienungsanleitung

Xantrex

Xantrex XPower 3000 Bedienungsanleitung

Xantrex

Xantrex XW4024-230-50 Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung